← Commit history

Initial commit: component/tps61176rter

Ray ·3993b1e5db ·
2 files changed +251
README.mdadded+54
@@ -0,0 +1,54 @@+# TPS61176RTER++**Texas Instruments** · LED Drivers · WQFN-16-EP(3x3)++TPS61176RTER from Texas Instruments, in a WQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | PWM/EN | input | PWM dimming signal input and IC enable/disable control; pulling low for more than 20ms disables the IC and enters shutdown mode |+| 2 | VLDO | output | Internal pre-regulator output of 3.0V to 3.5V for internal circuit supply; connect a 1µF ceramic bypass capacitor |+| 3 | ISET | input | Current setting pin; connect a resistor to program the full-scale LED current per equation IFBx_full = 1.04V × 1024 / RISET |+| 4 | COMP | passive | Boost loop compensation pin; connect a 0.47µF to 1µF ceramic capacitor for loop stability and soft-start control |+| 5 | IFB4 | output | Regulated current sink output with maximum 35mA output current per channel; ±2.3% maximum accuracy over -40°C to +85°C |+| 6 | IFB5 | output | Regulated current sink output with maximum 35mA output current per channel; ±2.3% maximum accuracy over -40°C to +85°C |+| 7 | IFB6 | output | Regulated current sink output with maximum 35mA output current per channel; ±2.3% maximum accuracy over -40°C to +85°C |+| 8 | GND | power_in | Analog ground connection |+| 9 | IFB1 | output | Regulated current sink output with maximum 35mA output current per channel; ±2.3% maximum accuracy over -40°C to +85°C |+| 10 | IFB2 | output | Regulated current sink output with maximum 35mA output current per channel; ±2.3% maximum accuracy over -40°C to +85°C |+| 11 | IFB3 | output | Regulated current sink output with maximum 35mA output current per channel; ±2.3% maximum accuracy over -40°C to +85°C |+| 12 | OVP | input | Over-voltage protection monitoring pin; connect through external resistor divider to sense boost output voltage up to 38V |+| 13 | PGND | power_in | Power ground connection for high-current switching path return |+| 14 | SW | output | Drain of the internal 2A/40V power MOSFET; switching node with maximum voltage rating of 40V |+| 15 | VIN | power_in | Supply input pin accepting 2.7V to 6.5V; provides power to the IC with maximum quiescent current of 3mA |+| 16 | MODE/FAULT | output | Multi-function pin for dimming mode programming via external resistor and active driver (via internal current sink) for external P-channel isolation MOSFET gate control |+| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | WQFN-16-EP(3x3) |+| Category | LED Drivers |+| Pins | 17 |++## CAD (KiCad official)++- Symbol: `TPS61176RTER`+- Footprint: `Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm`+- 3D model: WQFN-16-EP(3x3) (KiCad packages3D, STEP)+- 3D model files: `tps61176rter-etched.step` / `tps61176rter-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps61176rter.step` / `tps61176rter.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps61176) (30 pp, sha256 `e79b914920767292`, retrieved 2026-09-23, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps61176rter-datasheet.pdf)
page.jsonadded+197
@@ -0,0 +1,197 @@+{+  "slug": "tps61176rter",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments LED Drivers, WQFN-16-EP(3x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "led drivers",+    "tps61176rter",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "tps61176rter.kicad_sym",+    "tps61176rter.kicad_mod",+    "tps61176rter.glb",+    "tps61176rter.step",+    "tps61176rter.lbr",+    "docs/hero.png",+    "docs/tps61176rter-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "TPS61176RTER",+    "manufacturer": "Texas Instruments",+    "package": "WQFN-16-EP(3x3)",+    "pin_count": 17,+    "category": "LED Drivers",+    "subcategory": "LED Drivers",+    "datasheet": "https://www.ti.com/cn/lit/gpn/tps61176",+    "parts": {+      "symbol": "tps61176rter.kicad_sym",+      "footprint": "tps61176rter.kicad_mod",+      "model_3d": "tps61176rter-etched.glb",+      "model_3d_plain": "tps61176rter.glb",+      "model_3d_step": "tps61176rter-etched.step",+      "model_3d_step_plain": "tps61176rter.step",+      "lbr": "tps61176rter.lbr"+    },+    "distributor_links": {+      "lcsc": "C117008"+    },+    "pins": [+      {+        "number": "1",+        "name": "PWM/EN",+        "type": "input",+        "description": "PWM dimming signal input and IC enable/disable control; pulling low for more than 20ms disables the IC and enters shutdown mode"+      },+      {+        "number": "2",+        "name": "VLDO",+        "type": "output",+        "description": "Internal pre-regulator output of 3.0V to 3.5V for internal circuit supply; connect a 1µF ceramic bypass capacitor"+      },+      {+        "number": "3",+        "name": "ISET",+        "type": "input",+        "description": "Current setting pin; connect a resistor to program the full-scale LED current per equation IFBx_full = 1.04V × 1024 / RISET"+      },+      {+        "number": "4",+        "name": "COMP",+        "type": "passive",+        "description": "Boost loop compensation pin; connect a 0.47µF to 1µF ceramic capacitor for loop stability and soft-start control"+      },+      {+        "number": "5",+        "name": "IFB4",+        "type": "output",+        "description": "Regulated current sink output with maximum 35mA output current per channel; ±2.3% maximum accuracy over -40°C to +85°C"+      },+      {+        "number": "6",+        "name": "IFB5",+        "type": "output",+        "description": "Regulated current sink output with maximum 35mA output current per channel; ±2.3% maximum accuracy over -40°C to +85°C"+      },+      {+        "number": "7",+        "name": "IFB6",+        "type": "output",+        "description": "Regulated current sink output with maximum 35mA output current per channel; ±2.3% maximum accuracy over -40°C to +85°C"+      },+      {+        "number": "8",+        "name": "GND",+        "type": "power_in",+        "description": "Analog ground connection"+      },+      {+        "number": "9",+        "name": "IFB1",+        "type": "output",+        "description": "Regulated current sink output with maximum 35mA output current per channel; ±2.3% maximum accuracy over -40°C to +85°C"+      },+      {+        "number": "10",+        "name": "IFB2",+        "type": "output",+        "description": "Regulated current sink output with maximum 35mA output current per channel; ±2.3% maximum accuracy over -40°C to +85°C"+      },+      {+        "number": "11",+        "name": "IFB3",+        "type": "output",+        "description": "Regulated current sink output with maximum 35mA output current per channel; ±2.3% maximum accuracy over -40°C to +85°C"+      },+      {+        "number": "12",+        "name": "OVP",+        "type": "input",+        "description": "Over-voltage protection monitoring pin; connect through external resistor divider to sense boost output voltage up to 38V"+      },+      {+        "number": "13",+        "name": "PGND",+        "type": "power_in",+        "description": "Power ground connection for high-current switching path return"+      },+      {+        "number": "14",+        "name": "SW",+        "type": "output",+        "description": "Drain of the internal 2A/40V power MOSFET; switching node with maximum voltage rating of 40V"+      },+      {+        "number": "15",+        "name": "VIN",+        "type": "power_in",+        "description": "Supply input pin accepting 2.7V to 6.5V; provides power to the IC with maximum quiescent current of 3mA"+      },+      {+        "number": "16",+        "name": "MODE/FAULT",+        "type": "output",+        "description": "Multi-function pin for dimming mode programming via external resistor and active driver (via internal current sink) for external P-channel isolation MOSFET gate control"+      },+      {+        "number": "17",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "exposed pad 17 added from the footprint"+        ],+        "pages_sent": 30,+        "cost_usd": 0.3625,+        "at": "2026-09-23T17:29:08"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/tps61176",+        "pages": 30,+        "sha256": "e79b914920767292",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 17,+        "described": 17,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file