Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TPS61176RTER

Texas Instruments · LED Drivers · WQFN-16-EP(3x3)

TPS61176RTER from Texas Instruments, in a WQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PWM/EN input PWM dimming signal input and IC enable/disable control; pulling low for more than 20ms disables the IC and enters shutdown mode
2 VLDO output Internal pre-regulator output of 3.0V to 3.5V for internal circuit supply; connect a 1µF ceramic bypass capacitor
3 ISET input Current setting pin; connect a resistor to program the full-scale LED current per equation IFBx_full = 1.04V × 1024 / RISET
4 COMP passive Boost loop compensation pin; connect a 0.47µF to 1µF ceramic capacitor for loop stability and soft-start control
5 IFB4 output Regulated current sink output with maximum 35mA output current per channel; ±2.3% maximum accuracy over -40°C to +85°C
6 IFB5 output Regulated current sink output with maximum 35mA output current per channel; ±2.3% maximum accuracy over -40°C to +85°C
7 IFB6 output Regulated current sink output with maximum 35mA output current per channel; ±2.3% maximum accuracy over -40°C to +85°C
8 GND power_in Analog ground connection
9 IFB1 output Regulated current sink output with maximum 35mA output current per channel; ±2.3% maximum accuracy over -40°C to +85°C
10 IFB2 output Regulated current sink output with maximum 35mA output current per channel; ±2.3% maximum accuracy over -40°C to +85°C
11 IFB3 output Regulated current sink output with maximum 35mA output current per channel; ±2.3% maximum accuracy over -40°C to +85°C
12 OVP input Over-voltage protection monitoring pin; connect through external resistor divider to sense boost output voltage up to 38V
13 PGND power_in Power ground connection for high-current switching path return
14 SW output Drain of the internal 2A/40V power MOSFET; switching node with maximum voltage rating of 40V
15 VIN power_in Supply input pin accepting 2.7V to 6.5V; provides power to the IC with maximum quiescent current of 3mA
16 MODE/FAULT output Multi-function pin for dimming mode programming via external resistor and active driver (via internal current sink) for external P-channel isolation MOSFET gate control
17 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WQFN-16-EP(3x3)
Category LED Drivers
Pins 17

CAD (KiCad official)

  • Symbol: TPS61176RTER
  • Footprint: Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
  • 3D model: WQFN-16-EP(3x3) (KiCad packages3D, STEP)
  • 3D model files: tps61176rter-etched.step / tps61176rter-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps61176rter.step / tps61176rter.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (30 pp, sha256 e79b914920767292, retrieved 2026-09-23, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF