component
TPS61169DCKR
Public Made by Adomby adom
Texas Instruments LED Drivers, SC-70-5. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTPS61169DCKR
Texas Instruments · LED Drivers · SC-70-5
TPS61169DCKR from Texas Instruments, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | power_out | Drain connection of the internal power N-channel FET (40V, 1.8A, 0.35Ω typical RDS(on)). Connect to the inductor and Schottky diode of the boost stage. Open LED protection monitors this node against the 37.5V typical OVP threshold. |
| 2 | GND | power_in | Device ground. Reference for all internal circuitry and the FB sense resistor return. Connect directly to the system ground plane with low impedance. |
| 3 | FB | input | Current feedback pin. Connect a current-sense resistor (RSET) from FB to GND to program LED current as ILED = VFB / RSET. Regulated to 204mV typical (188-220mV) at 100% CTRL duty; FB bias current ≤2.5µA. |
| 4 | CTRL | input | PWM dimming and enable input. Logic high threshold 1.2V (min), logic low 0.4V (max), with an internal ~300kΩ pull-down. Apply a 5-100kHz PWM signal (1%-100% duty) to modulate the effective FB reference (VFB = Duty × 204mV) for LED brightness dimming. Holding CTRL low for >2.5ms places the device in shutdown. |
| 5 | VIN | power_in | Supply input pin. Operating range 2.7V to 5.5V (7V absolute max). UVLO threshold ~2V (2.3V rising / 2.0V falling typical) with 200mV hysteresis. Quiescent current 0.3mA typical while switching; 1µA typical in shutdown. Bypass with a ≥1µF ceramic capacitor to GND close to the pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SC-70-5 |
| Category | LED Drivers |
| Pins | 5 |
Ordering variants
Same part, different packaging or reel option.
TPS61169DCKRTPS61169DCKRDCKT
CAD (KiCad official)
- Symbol:
TPS61169DCKR - Footprint:
Package_TO_SOT_SMD:SOT-353_SC-70-5 - 3D model: SC-70-5 (KiCad packages3D, STEP)
- 3D model files:
tps61169dckr-etched.step/tps61169dckr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps61169dckr.step/tps61169dckr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (24 pp, sha256
7d0b8ace2459a9fd, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).