TPS61160ADRVR

{
  "slug": "tps61160adrvr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments LED Drivers, WSON-6-EP(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "led drivers",
    "tps61160adrvr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps61160adrvr.kicad_sym",
    "tps61160adrvr.kicad_mod",
    "tps61160adrvr.glb",
    "tps61160adrvr.step",
    "tps61160adrvr.lbr",
    "docs/hero.png",
    "docs/tps61160adrvr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tps61160adrvr-hero.glb",
    "tps61160adrvr-hero.overlay.json"
  ],
  "component": {
    "mpn": "TPS61160ADRVR",
    "manufacturer": "Texas Instruments",
    "package": "WSON-6-EP(2x2)",
    "pin_count": 7,
    "category": "LED Drivers",
    "subcategory": "LED Drivers",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tps61161a",
    "parts": {
      "symbol": "tps61160adrvr.kicad_sym",
      "footprint": "tps61160adrvr.kicad_mod",
      "model_3d": "tps61160adrvr-hero.glb",
      "model_3d_plain": "tps61160adrvr.glb",
      "model_3d_step": "tps61160adrvr-etched.step",
      "model_3d_step_plain": "tps61160adrvr.step",
      "lbr": "tps61160adrvr.lbr"
    },
    "distributor_links": {
      "lcsc": "C702281",
      "digikey": "296-24308-2-ND",
      "mouser": "595-TPS61160ADRVR"
    },
    "distributor_check": {
      "checked_at": "2026-10-08T00:42:16Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-24308-2-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-TPS61160ADRVR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "FB",
        "type": "input",
        "description": "Current feedback pin; the LED sense resistor connects from FB to GND, and the absolute maximum voltage on FB and COMP is -0.3 V to 3 V."
      },
      {
        "number": "2",
        "name": "COMP",
        "type": "output",
        "description": "Output of the transconductance error amplifier; connect an external capacitor to this pin to compensate the regulator."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin for the device."
      },
      {
        "number": "4",
        "name": "SW",
        "type": "input",
        "description": "Switching node of the IC; the inductor connects between VIN and SW, and this pin also senses the output voltage for open LED protection, with an absolute maximum of -0.3 V to 40 V."
      },
      {
        "number": "5",
        "name": "CTRL",
        "type": "input",
        "description": "Control pin that enables and disables the boost regulator and accepts a PWM signal for LED brightness dimming, with an absolute maximum of -0.3 V to 20 V."
      },
      {
        "number": "6",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply pin; connect to a supply voltage between 2.7 V and 18 V (absolute maximum -0.3 V to 20 V)."
      },
      {
        "number": "7",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet lists the thermal pad as a pad with no printed pin number, so it is excluded from the ; Type mapping: the datasheet marks SW as I and VIN as I, and GND as O. I used input for SW as printed; The datasheet's pin table covers the DRV package only. The orderable addendum lists TPS61160ADRVR as",
          "exposed pad 7 added from the footprint"
        ],
        "pages_sent": 8,
        "cost_usd": 0.0523,
        "at": "2026-10-08T00:42:01"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tps61161a",
        "pages": 35,
        "sha256": "a9b844ebee36389e",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 7,
        "described": 7,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps61160adrvr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.0,
          1.98,
          0.82
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "a159a524ab16d3406353a16f8c20b59f5679eea26e2d41174628288b5b9da702",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps61160adrvr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.0,
          1.98,
          0.82
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "1a85dd376e8cf67a7020683bcae27e2cff1a35f021f226b8ac50a0af0a2e7086",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}