TPS610987DSER

{
  "slug": "tps610987dser",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments DC-DC Converters, WSON-6(1.5x1.5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "tps610987dser",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps610987dser.kicad_sym",
    "tps610987dser.kicad_mod",
    "tps610987dser.glb",
    "tps610987dser.step",
    "tps610987dser.lbr",
    "docs/hero.png",
    "docs/tps610987dser-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tps610987dser-hero.glb",
    "tps610987dser-hero.overlay.json"
  ],
  "component": {
    "mpn": "TPS610987DSER",
    "manufacturer": "Texas Instruments",
    "package": "WSON-6(1.5x1.5)",
    "pin_count": 6,
    "category": "Power Management (PMIC)",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tps610987",
    "parts": {
      "symbol": "tps610987dser.kicad_sym",
      "footprint": "tps610987dser.kicad_mod",
      "model_3d": "tps610987dser-hero.glb",
      "model_3d_plain": "tps610987dser.glb",
      "model_3d_step": "tps610987dser-etched.step",
      "model_3d_step_plain": "tps610987dser.step",
      "lbr": "tps610987dser.lbr"
    },
    "distributor_links": {
      "lcsc": "C2658854",
      "digikey": "TPS610987DSER-ND",
      "mouser": "595-TPS610987DSER"
    },
    "distributor_check": {
      "checked_at": "2026-10-08T15:53:14Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "TPS610987DSER-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-TPS610987DSER",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VMAIN",
        "type": "power_out",
        "description": "Boost converter output, which is always on and supplies the main system; the active-mode VMAIN is 4.3 V for this part and the boost output range is 2.2 V to 4.3 V, with 5 µF to 22 µF effective output capacitance."
      },
      {
        "number": "2",
        "name": "SW",
        "type": "passive",
        "description": "Connection for the boost converter inductor (datasheet lists this pin as PWR without further limits); the effective inductance range is 1.54 µH to 6.11 µH with 4.7 µH typical."
      },
      {
        "number": "3",
        "name": "VIN",
        "type": "power_in",
        "description": "IC power supply input with a recommended range of 0.7 V to 4.5 V and an absolute maximum of -0.3 V to 4.7 V."
      },
      {
        "number": "4",
        "name": "MODE",
        "type": "input",
        "description": "Mode selection pin: high selects active mode and low selects low-power mode, it must be actively tied high or low and never left floating, with an absolute maximum of -0.3 V to 5.0 V."
      },
      {
        "number": "5",
        "name": "VSUB",
        "type": "power_out",
        "description": "LDO or load switch output for peripherals, with a recommended output range of 1.8 V to 3.7 V; this part's active-mode VSUB is 3.1 V and it is switched off in low-power mode, with 1 µF to 10 µF output capacitance depending on LDO or load-switch version."
      },
      {
        "number": "6",
        "name": "GND",
        "type": "power_in",
        "description": "IC ground reference pin."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet classifies SW only as 'PWR' ('Connection for inductor'); I mapped it to KiCad 'passive; VMAIN and VSUB are labeled 'PWR' (outputs) in the table; mapped to KiCad 'power_out' based on 'Boost; The DSE 6-pin WSON pinout is shared by the whole TPS61098x family. The pin table is on page 3 and th"
        ],
        "pages_sent": 8,
        "cost_usd": 0.0606,
        "at": "2026-10-08T15:52:59"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tps610987",
        "pages": 43,
        "sha256": "c87e6b5b5237c26f",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 6,
        "described": 6,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps610987dser.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          1.5,
          1.48,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b286efb19ee878f7094913552ef4b3d65067278c4f8bce5547303f697797652f",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps610987dser-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          1.5,
          1.48,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "3d06d9ebb3627d1a167ccb6f27b95ea607b63da24fc17b794edd6826f9784401",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}