component
TPS61041M5
Public Made by Adomby adom
HGSEMI DC-DC Converters, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTPS61041M5
HGSEMI · DC-DC Converters · SOT-23-5
TPS61041M5 from HGSEMI, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | passive | Switch pin connected to the drain of the internal power MOSFET; connect the inductor and Schottky diode here (max switch voltage 30 V). |
| 2 | GND | power_in | Ground. |
| 3 | FB | input | Feedback pin; connect to the external voltage divider to program the output voltage (reference 1.233 V). |
| 4 | EN | input | Enable pin; pulling it to ground forces shutdown with supply current below 1 µA, and it must not be left floating. |
| 5 | VIN | power_in | Supply voltage pin, 1.8 V to 6 V operating range. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage range | VIN | 1.8 | 6 | V | VIN = 2.4 V, EN = VIN, TA = -40°C to 85°C | 6 | |
| Operating quiescent current | IQ | 28 | 50 | µA | IOUT = 0 mA, not switching, VFB = 1.3 V | 6 | |
| Shutdown current | ISD | 0.1 | 1 | µA | EN = GND | 6 | |
| Under-voltage lockout threshold | VUVLO | 1.5 | 1.7 | V | 6 | ||
| EN high level input voltage | VIH | 1.3 | V | 6 | |||
| EN low level input voltage | VIL | 0.4 | V | 6 | |||
| EN input leakage current | II | 0.1 | 1 | µA | EN = GND or VIN | 6 | |
| Maximum switch voltage | Vsw | 30 | V | 6 | |||
| Minimum off time | toff | 250 | 400 | 550 | ns | 6 | |
| Maximum on time | ton | 4 | 6 | 7.5 | µs | 6 | |
| MOSFET on-resistance | RDS(on) | 750 | 1250 | mΩ | VIN = 2.4 V; ISW = 200 mA; TPS61041 | 6 | |
| MOSFET leakage current | 1 | 10 | µA | VSW = 28 V | 6 | ||
| MOSFET current limit | ILIM | 215 | 250 | 285 | mA | TPS61041 | 6 |
| Adjustable output voltage range | VOUT | 28 | V | 6 | |||
| Internal voltage reference | Vref | 1.233 | V | 6 | |||
| Feedback input bias current | IFB | 1 | µA | VFB = 1.3 V | 6 | ||
| Feedback trip point voltage | VFB | 1.208 | 1.233 | 1.258 | V | 1.8 V ≤ VIN ≤ 6 V | 6 |
| Line regulation | 0.05 | %/V | 1.8 V ≤ VIN ≤ 6 V; VOUT = 18 V; Iload = 10 mA; CFF = not connected | 6 | |||
| Load regulation | 0.15 | %/mA | VIN = 2.4 V; VOUT = 18 V; 0 mA ≤ IOUT ≤ 30 mA | 6 | |||
| Supply voltage on pin VIN | VIN | -0.3 | 7 | V | 5 | ||
| Switch voltage on pin SW | 30 | V | 5 | ||||
| Lead temperature (soldering, 10 seconds) | 260 | °C | 5 | ||||
| Operating junction temperature | TJ | -40 | 150 | °C | 5 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| Input voltage range | VIN | 1.8 | 6 | V | 5 | ||
| Output voltage range | VOUT | 28 | V | 5 | |||
| Inductor | L | 2.2 | 10 | µH | see application section | 5 | |
| Switching frequency | f | 1 | MHz | 5 | |||
| Input capacitor | CIN | 4.7 | µF | see application section | 5 | ||
| Output capacitor | COUT | 1 | µF | see application section | 5 | ||
| Operating ambient temperature | TA | -40 | 85 | °C | 5 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 5 |
CAD (KiCad official)
- Symbol:
TPS61041M5 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
tps61041m5-etched.step/tps61041m5-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps61041m5.step/tps61041m5.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (20 pp, sha256
81e08c65c860e641, retrieved 2026-10-22, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).