component
TPS61032PWPR
Public Made by Adomby adom
Texas Instruments DC-DC Converters, HTSSOP-16-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+53@@ -0,0 +1,53 @@+# TPS61032PWPR++**Texas Instruments** · DC-DC Converters · HTSSOP-16-EP++TPS61032PWPR from Texas Instruments, in a HTSSOP-16-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | SW | output | Switching node connecting boost converter to external inductor for step-up energy transfer; supports peak switch currents up to 4500 mA at 5 V output |+| 2 | SW | output | Switching node connecting boost converter to external inductor for step-up energy transfer; supports peak switch currents up to 4500 mA at 5 V output |+| 3 | PGND | power_out | Power ground return for boost MOSFET source connection and high-current power path |+| 4 | PGND | power_out | Power ground return for boost MOSFET source connection and high-current power path |+| 5 | PGND | power_out | Power ground return for boost MOSFET source connection and high-current power path |+| 6 | VBAT | power_in | Supply voltage input with recommended operating range 1.8 V to 5.5 V for single-cell lithium-ion or two to three-cell alkaline batteries |+| 7 | LBI | input | Low battery comparator analog input with 500 mV nominal switching threshold and 10 mV hysteresis for battery voltage detection |+| 8 | SYNC | input | Synchronization and power save mode control pin; high voltage disables power save mode, low enables power save mode, or accepts external clock signal ±20% of nominal 600 kHz |+| 9 | EN | input | Device enable input; logic high enables converter operation, logic low forces shutdown mode with complete load isolation from battery |+| 10 | LBO | output | Low battery comparator open-drain output; active low when LBI voltage falls below 500 mV threshold voltage |+| 11 | GND | power_out | Control and logic ground reference for internal feedback and enable circuitry; must be connected to PGND at single PCB point near this pin to minimize ground shift noise |+| 12 | FB | input | Feedback voltage input for adjustable output voltage divider programming in adjustable versions; 500 mV nominal reference threshold |+| 13 | VOUT | output | DC/DC boost converter regulated output; provides fixed 5.0 V nominal output voltage with maximum output current up to 1000 mA |+| 14 | VOUT | output | DC/DC boost converter regulated output; provides fixed 5.0 V nominal output voltage with maximum output current up to 1000 mA |+| 15 | VOUT | output | DC/DC boost converter regulated output; provides fixed 5.0 V nominal output voltage with maximum output current up to 1000 mA |+| 16 | NC | unconnected | No internal connection |+| 17 | PowerPAD | power_out | Thermal dissipation metal pad connected to power ground (PGND); must be soldered to PCB for thermal performance and mechanical stability |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | HTSSOP-16-EP |+| Category | Power Management (PMIC) |+| Pins | 17 |++## CAD (KiCad official)++- Symbol: `TPS61032PWPR`+- Footprint: `Package_SO:TSSOP-16-1EP_4.4x5mm_P0.65mm`+- 3D model: HTSSOP-16-EP (KiCad packages3D, STEP)+- 3D model files: `tps61032pwpr-etched.step` / `tps61032pwpr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps61032pwpr.step` / `tps61032pwpr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps61030) (33 pp, sha256 `09d8799e40eac542`, retrieved 2026-09-23, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps61032pwpr-datasheet.pdf)
page.jsonadded+198@@ -0,0 +1,198 @@+{+ "slug": "tps61032pwpr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments DC-DC Converters, HTSSOP-16-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "tps61032pwpr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tps61032pwpr.kicad_sym",+ "tps61032pwpr.kicad_mod",+ "tps61032pwpr.glb",+ "tps61032pwpr.step",+ "tps61032pwpr.lbr",+ "docs/hero.png",+ "docs/tps61032pwpr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "TPS61032PWPR",+ "manufacturer": "Texas Instruments",+ "package": "HTSSOP-16-EP",+ "pin_count": 17,+ "category": "Power Management (PMIC)",+ "subcategory": "DC-DC Converters",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tps61030",+ "parts": {+ "symbol": "tps61032pwpr.kicad_sym",+ "footprint": "tps61032pwpr.kicad_mod",+ "model_3d": "tps61032pwpr-etched.glb",+ "model_3d_plain": "tps61032pwpr.glb",+ "model_3d_step": "tps61032pwpr-etched.step",+ "model_3d_step_plain": "tps61032pwpr.step",+ "lbr": "tps61032pwpr.lbr"+ },+ "distributor_links": {+ "lcsc": "C88716"+ },+ "pins": [+ {+ "number": "1",+ "name": "SW",+ "type": "output",+ "description": "Switching node connecting boost converter to external inductor for step-up energy transfer; supports peak switch currents up to 4500 mA at 5 V output"+ },+ {+ "number": "2",+ "name": "SW",+ "type": "output",+ "description": "Switching node connecting boost converter to external inductor for step-up energy transfer; supports peak switch currents up to 4500 mA at 5 V output"+ },+ {+ "number": "3",+ "name": "PGND",+ "type": "power_out",+ "description": "Power ground return for boost MOSFET source connection and high-current power path"+ },+ {+ "number": "4",+ "name": "PGND",+ "type": "power_out",+ "description": "Power ground return for boost MOSFET source connection and high-current power path"+ },+ {+ "number": "5",+ "name": "PGND",+ "type": "power_out",+ "description": "Power ground return for boost MOSFET source connection and high-current power path"+ },+ {+ "number": "6",+ "name": "VBAT",+ "type": "power_in",+ "description": "Supply voltage input with recommended operating range 1.8 V to 5.5 V for single-cell lithium-ion or two to three-cell alkaline batteries"+ },+ {+ "number": "7",+ "name": "LBI",+ "type": "input",+ "description": "Low battery comparator analog input with 500 mV nominal switching threshold and 10 mV hysteresis for battery voltage detection"+ },+ {+ "number": "8",+ "name": "SYNC",+ "type": "input",+ "description": "Synchronization and power save mode control pin; high voltage disables power save mode, low enables power save mode, or accepts external clock signal ±20% of nominal 600 kHz"+ },+ {+ "number": "9",+ "name": "EN",+ "type": "input",+ "description": "Device enable input; logic high enables converter operation, logic low forces shutdown mode with complete load isolation from battery"+ },+ {+ "number": "10",+ "name": "LBO",+ "type": "output",+ "description": "Low battery comparator open-drain output; active low when LBI voltage falls below 500 mV threshold voltage"+ },+ {+ "number": "11",+ "name": "GND",+ "type": "power_out",+ "description": "Control and logic ground reference for internal feedback and enable circuitry; must be connected to PGND at single PCB point near this pin to minimize ground shift noise"+ },+ {+ "number": "12",+ "name": "FB",+ "type": "input",+ "description": "Feedback voltage input for adjustable output voltage divider programming in adjustable versions; 500 mV nominal reference threshold"+ },+ {+ "number": "13",+ "name": "VOUT",+ "type": "output",+ "description": "DC/DC boost converter regulated output; provides fixed 5.0 V nominal output voltage with maximum output current up to 1000 mA"+ },+ {+ "number": "14",+ "name": "VOUT",+ "type": "output",+ "description": "DC/DC boost converter regulated output; provides fixed 5.0 V nominal output voltage with maximum output current up to 1000 mA"+ },+ {+ "number": "15",+ "name": "VOUT",+ "type": "output",+ "description": "DC/DC boost converter regulated output; provides fixed 5.0 V nominal output voltage with maximum output current up to 1000 mA"+ },+ {+ "number": "16",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection"+ },+ {+ "number": "17",+ "name": "PowerPAD",+ "type": "power_out",+ "description": "Thermal dissipation metal pad connected to power ground (PGND); must be soldered to PCB for thermal performance and mechanical stability"+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Datasheet Pin Functions table lists SW (pins 1, 2) as input type ('I'), but these pins function as t",+ "1/17 pins cited to the wrong page (name found elsewhere): ['17:PowerPAD@p3']"+ ],+ "pages_sent": 33,+ "cost_usd": 0.3828,+ "at": "2026-09-23T13:39:17"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tps61030",+ "pages": 33,+ "sha256": "09d8799e40eac542",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 17,+ "described": 17,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}