component
TPS61020DRCR
Public Made by Adomby adom
Texas Instruments DC-DC Converters, WSON-10-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTPS61020DRCR
Texas Instruments · DC-DC Converters · WSON-10-EP(3x3)
TPS61020DRCR from Texas Instruments, in a WSON-10-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Enable input (1/VBAT enabled, 0/GND disabled) |
| 2 | VOUT | power_out | Boost converter output |
| 3 | FB | input | Voltage feedback of adjustable versions |
| 4 | LBO | tri_state | Low battery comparator output (open drain) |
| 5 | GND | power_in | Control / logic ground |
| 6 | VBAT | power_in | Supply voltage |
| 7 | LBI | input | Low battery comparator input (comparator enabled with EN), may not be left floating, should be connected to GND or VBAT if comparator is not used |
| 8 | PS | input | Enable/disable power save mode (1/VBAT disabled, 0/GND enabled) |
| 9 | SW | output | Boost and rectifying switch input |
| 10 | PGND | power_in | Power ground |
| 11 | PowerPAD | power_in | Must be soldered to achieve appropriate power dissipation, should be connected to PGND |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-10-EP(3x3) |
| Category | Power Management (PMIC) |
| Pins | 11 |
CAD (KiCad official)
- Symbol:
TPS61020DRCR - Footprint:
Package_SON:VSON-10-1EP_3x3mm_P0.5mm_EP1.2x2mm - 3D model: WSON-10-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
tps61020drcr-etched.step/tps61020drcr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps61020drcr.step/tps61020drcr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (32 pp, sha256
970777c56be06a42, retrieved 2026-10-03, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).