TPS61006DGSR

{
  "schema_version": 1,
  "type": "component",
  "slug": "tps61006dgsr",
  "title": "TPS61006DGSR",
  "brief": "Texas Instruments DC-DC Converters, VSSOP-10-0.5mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "power supply chip",
    "tps61006dgsr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "TPS61006DGSR",
    "manufacturer": "Texas Instruments",
    "package": "VSSOP-10-0.5mm",
    "pin_count": 10,
    "category": "Power Supply Chip",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tps61005",
    "parts": {
      "symbol": "tps61006dgsr.kicad_sym",
      "footprint": "tps61006dgsr.kicad_mod",
      "model_3d": "tps61006dgsr-hero.glb",
      "model_3d_plain": "tps61006dgsr.glb",
      "model_3d_step": "tps61006dgsr-etched.step",
      "model_3d_step_plain": "tps61006dgsr.step",
      "lbr": "tps61006dgsr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2072612",
      "digikey": "TPS61006DGSR-ND",
      "mouser": "595-TPS61006DGSR"
    },
    "distributor_check": {
      "checked_at": "2026-10-08T15:32:28Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "TPS61006DGSR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-TPS61006DGSR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "EN",
        "type": "input",
        "description": "Chip-enable input: the converter is switched on when EN is high and switched off (shutdown) when EN is connected to ground."
      },
      {
        "number": "2",
        "name": "COMP",
        "type": "passive",
        "description": "Error-amplifier compensation pin; connect an R-C-C network here to set the frequency response of the control loop."
      },
      {
        "number": "3",
        "name": "FB",
        "type": "unconnected",
        "description": "Feedback input for adjustable output only (TPS61000); for the fixed-output TPS61006 this pin must be left unconnected."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin."
      },
      {
        "number": "5",
        "name": "VOUT",
        "type": "power_out",
        "description": "Output voltage; for the fixed-output versions the integrated resistive divider is connected to this pin."
      },
      {
        "number": "6",
        "name": "VBAT",
        "type": "power_in",
        "description": "Supply pin for the converter; the device starts into a full load from supply voltages as low as 0.9 V and operates down to 0.8 V."
      },
      {
        "number": "7",
        "name": "SW",
        "type": "input",
        "description": "Switch input pin; the node between the inductor and the anode of the rectifier diode connects to this pin, with absolute maximum SW voltage of VOUT + 0.7 V."
      },
      {
        "number": "8",
        "name": "NC/FBGND",
        "type": "unconnected",
        "description": "Not connected on the TPS61006; it serves as the ground pin for the feedback resistor divider on the TPS61007 only."
      },
      {
        "number": "9",
        "name": "LBI",
        "type": "input",
        "description": "Low-battery detector input; LBO is pulled low when LBI drops below the 500 mV threshold, and LBI must be tied to GND or VBAT if unused and must not be left floating."
      },
      {
        "number": "10",
        "name": "LBO",
        "type": "output",
        "description": "Open-drain low-battery detector output that is pulled low when LBI falls below 500 mV; a pull-up resistor should be connected between LBO and VOUT."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The I/O column for COMP is printed as a dash in the pin table, so the type 'passive' is my inference; FB and NC/FBGND are not connected on the TPS61006 fixed-output version; type set to 'unconnected' ba; The table gives I/O as O (VOUT) and I (VBAT); KiCad classes power_out and power_in were chosen from "
        ],
        "pages_sent": 8,
        "cost_usd": 0.0541,
        "at": "2026-10-08T15:32:01"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tps61005",
        "pages": 31,
        "sha256": "2cac6e085a4ce051",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 10,
        "described": 10,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps61006dgsr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3,
          1.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "b8f88eac3ce221c2ccb0b5048f9ad49c2ef4af148f8ae50c4e232e357683f547",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps61006dgsr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3,
          1.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "9a5e6780dd0b7266495d188c673643ad9fa891c10ee07062e6f8f152c03965fe",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "VSSOP-10-0.5mm",
      "Category": "Power Supply Chip",
      "Pins": "10"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "tps61006dgsr"
  ],
  "discovery_pitch": "TPS61006DGSR (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps61006dgsr.kicad_sym",
    "tps61006dgsr.kicad_mod",
    "tps61006dgsr.glb",
    "tps61006dgsr.step",
    "tps61006dgsr.lbr",
    "docs/hero.png",
    "docs/tps61006dgsr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tps61006dgsr-hero.glb",
    "tps61006dgsr-hero.overlay.json"
  ],
  "visibility": {
    "public": true
  }
}