component

TPS60501DGSR

Public Made by Adom

by adom

Texas Instruments DC-DC Converters, VSSOP-10-0.5mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentpower supply chiptps60501dgsrfactory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray 2d ago
viewers tps60501dgsr: viewers · Ray 2d ago
package.json Publish 0.1.0 · Ray 2d ago
page.json Set visibility: public · Ray 2d ago
README.md Initial commit: component/tps60501dgsr · Ray 2d ago
tps60501dgsr-etched.glb tps60501dgsr: factory component page (tier=lcsc) · Ray 2d ago
tps60501dgsr-etched.step tps60501dgsr: factory component page (tier=lcsc) · Ray 2d ago
tps60501dgsr-hero.glb Publish 0.1.0 · Ray 2d ago
tps60501dgsr-hero.overlay.json Publish 0.1.0 · Ray 2d ago
tps60501dgsr.glb Publish 0.1.0 · Ray 2d ago
tps60501dgsr.kicad_mod Publish 0.1.0 · Ray 2d ago
tps60501dgsr.kicad_sym Publish 0.1.0 · Ray 2d ago
tps60501dgsr.lbr Publish 0.1.0 · Ray 2d ago
tps60501dgsr.step Publish 0.1.0 · Ray 2d ago

TPS60501DGSR

Texas Instruments · DC-DC Converters · VSSOP-10-0.5mm

TPS60501DGSR from Texas Instruments, in a VSSOP-10-0.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EN input Device-enable input; high disables the device and isolates load from input; low enables the device.
2 PG tri_state Open-drain power good detector output; pulled low when output is out of regulation; pulled high by external resistor when output voltage reaches approximately 97% of nominal value.
3 C2F− passive Negative terminal of flying capacitor C2F; requires 1 µF capacitor for charge pump operation.
4 C2F+ passive Positive terminal of flying capacitor C2F; requires 1 µF capacitor for charge pump operation.
5 VIN power_in Supply input; connect to input supply voltage in the range 1.8 V to 6.5 V.
6 C1F+ passive Positive terminal of flying capacitor C1F; requires 1 µF capacitor for charge pump operation.
7 OUT power_out Regulated power output voltage of 3.3 V for TPS60501; bypass to ground with output filter capacitor ranging from 4.7 µF to 22 µF depending on output current.
8 C1F− passive Negative terminal of flying capacitor C1F; requires 1 µF capacitor for charge pump operation.
9 GND power_in Ground connection.
10 FB input Feedback input from output for TPS60501; connect directly to regulated output voltage for feedback regulation.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-10-0.5mm
Category Power Supply Chip
Pins 10

CAD (KiCad official)

  • Symbol: TPS60501DGSR
  • Footprint: Package_SO:MSOP-10_3x3mm_P0.5mm
  • 3D model: VSSOP-10-0.5mm (KiCad packages3D, STEP)
  • 3D model files: tps60501dgsr-etched.step / tps60501dgsr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps60501dgsr.step / tps60501dgsr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (32 pp, sha256 1f029955b1a7942c, retrieved 2026-10-03, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF