component
TPS60501DGSR
Public Made by Adomby adom
Texas Instruments DC-DC Converters, VSSOP-10-0.5mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+46@@ -0,0 +1,46 @@+# TPS60501DGSR++**Texas Instruments** · DC-DC Converters · VSSOP-10-0.5mm++TPS60501DGSR from Texas Instruments, in a VSSOP-10-0.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | EN | input | Device-enable input; high disables the device and isolates load from input; low enables the device. |+| 2 | PG | tri_state | Open-drain power good detector output; pulled low when output is out of regulation; pulled high by external resistor when output voltage reaches approximately 97% of nominal value. |+| 3 | C2F− | passive | Negative terminal of flying capacitor C2F; requires 1 µF capacitor for charge pump operation. |+| 4 | C2F+ | passive | Positive terminal of flying capacitor C2F; requires 1 µF capacitor for charge pump operation. |+| 5 | VIN | power_in | Supply input; connect to input supply voltage in the range 1.8 V to 6.5 V. |+| 6 | C1F+ | passive | Positive terminal of flying capacitor C1F; requires 1 µF capacitor for charge pump operation. |+| 7 | OUT | power_out | Regulated power output voltage of 3.3 V for TPS60501; bypass to ground with output filter capacitor ranging from 4.7 µF to 22 µF depending on output current. |+| 8 | C1F− | passive | Negative terminal of flying capacitor C1F; requires 1 µF capacitor for charge pump operation. |+| 9 | GND | power_in | Ground connection. |+| 10 | FB | input | Feedback input from output for TPS60501; connect directly to regulated output voltage for feedback regulation. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VSSOP-10-0.5mm |+| Category | Power Supply Chip |+| Pins | 10 |++## CAD (KiCad official)++- Symbol: `TPS60501DGSR`+- Footprint: `Package_SO:MSOP-10_3x3mm_P0.5mm`+- 3D model: VSSOP-10-0.5mm (KiCad packages3D, STEP)+- 3D model files: `tps60501dgsr-etched.step` / `tps60501dgsr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps60501dgsr.step` / `tps60501dgsr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps60501) (32 pp, sha256 `1f029955b1a7942c`, retrieved 2026-10-03, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps60501dgsr-datasheet.pdf)
page.jsonadded+170@@ -0,0 +1,170 @@+{+ "slug": "tps60501dgsr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments DC-DC Converters, VSSOP-10-0.5mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power supply chip",+ "tps60501dgsr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tps60501dgsr.kicad_sym",+ "tps60501dgsr.kicad_mod",+ "tps60501dgsr.glb",+ "tps60501dgsr.step",+ "tps60501dgsr.lbr",+ "docs/hero.png",+ "docs/tps60501dgsr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "tps60501dgsr-hero.glb",+ "tps60501dgsr-hero.overlay.json"+ ],+ "component": {+ "mpn": "TPS60501DGSR",+ "manufacturer": "Texas Instruments",+ "package": "VSSOP-10-0.5mm",+ "pin_count": 10,+ "category": "Power Supply Chip",+ "subcategory": "DC-DC Converters",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tps60501",+ "parts": {+ "symbol": "tps60501dgsr.kicad_sym",+ "footprint": "tps60501dgsr.kicad_mod",+ "model_3d": "tps60501dgsr-hero.glb",+ "model_3d_plain": "tps60501dgsr.glb",+ "model_3d_step": "tps60501dgsr-etched.step",+ "model_3d_step_plain": "tps60501dgsr.step",+ "lbr": "tps60501dgsr.lbr"+ },+ "distributor_links": {+ "lcsc": 473389,+ "digikey": "296-48758-2-ND",+ "mouser": "595-TPS60501DGSR"+ },+ "distributor_check": {+ "checked_at": "2026-10-03T09:26:12Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-48758-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-TPS60501DGSR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "EN",+ "type": "input",+ "description": "Device-enable input; high disables the device and isolates load from input; low enables the device."+ },+ {+ "number": "2",+ "name": "PG",+ "type": "tri_state",+ "description": "Open-drain power good detector output; pulled low when output is out of regulation; pulled high by external resistor when output voltage reaches approximately 97% of nominal value."+ },+ {+ "number": "3",+ "name": "C2F−",+ "type": "passive",+ "description": "Negative terminal of flying capacitor C2F; requires 1 µF capacitor for charge pump operation."+ },+ {+ "number": "4",+ "name": "C2F+",+ "type": "passive",+ "description": "Positive terminal of flying capacitor C2F; requires 1 µF capacitor for charge pump operation."+ },+ {+ "number": "5",+ "name": "VIN",+ "type": "power_in",+ "description": "Supply input; connect to input supply voltage in the range 1.8 V to 6.5 V."+ },+ {+ "number": "6",+ "name": "C1F+",+ "type": "passive",+ "description": "Positive terminal of flying capacitor C1F; requires 1 µF capacitor for charge pump operation."+ },+ {+ "number": "7",+ "name": "OUT",+ "type": "power_out",+ "description": "Regulated power output voltage of 3.3 V for TPS60501; bypass to ground with output filter capacitor ranging from 4.7 µF to 22 µF depending on output current."+ },+ {+ "number": "8",+ "name": "C1F−",+ "type": "passive",+ "description": "Negative terminal of flying capacitor C1F; requires 1 µF capacitor for charge pump operation."+ },+ {+ "number": "9",+ "name": "GND",+ "type": "power_in",+ "description": "Ground connection."+ },+ {+ "number": "10",+ "name": "FB",+ "type": "input",+ "description": "Feedback input from output for TPS60501; connect directly to regulated output voltage for feedback regulation."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [],+ "pages_sent": 11,+ "cost_usd": 0.0963,+ "at": "2026-10-03T09:25:48"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tps60501",+ "pages": 32,+ "sha256": "1f029955b1a7942c",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 10,+ "described": 10,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}