TPS60313DGSR

{
  "slug": "tps60313dgsr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments DC-DC Converters, VSSOP-10-0.5mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "tps60313dgsr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps60313dgsr.kicad_sym",
    "tps60313dgsr.kicad_mod",
    "tps60313dgsr.glb",
    "tps60313dgsr.step",
    "tps60313dgsr.lbr",
    "docs/hero.png",
    "docs/tps60313dgsr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tps60313dgsr-hero.glb",
    "tps60313dgsr-hero.overlay.json"
  ],
  "component": {
    "mpn": "TPS60313DGSR",
    "manufacturer": "Texas Instruments",
    "package": "VSSOP-10-0.5mm",
    "pin_count": 10,
    "category": "Power Supply Chip",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.ti.com/cn/lit/ds/symlink/tps60311.pdf",
    "parts": {
      "symbol": "tps60313dgsr.kicad_sym",
      "footprint": "tps60313dgsr.kicad_mod",
      "model_3d": "tps60313dgsr-hero.glb",
      "model_3d_plain": "tps60313dgsr.glb",
      "model_3d_step": "tps60313dgsr-etched.step",
      "model_3d_step_plain": "tps60313dgsr.step",
      "lbr": "tps60313dgsr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2070780",
      "digikey": "296-13417-2-ND",
      "mouser": "595-TPS60313DGSR"
    },
    "distributor_check": {
      "checked_at": "2026-10-08T15:27:22Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-13417-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-TPS60313DGSR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "SNOOZE",
        "type": "input",
        "description": "Snooze mode enable input: pulling it low enables snooze mode at low output current, and pulling it high disables snooze mode."
      },
      {
        "number": "2",
        "name": "C1–",
        "type": "passive",
        "description": "Negative terminal of the flying capacitor C1F."
      },
      {
        "number": "3",
        "name": "VIN",
        "type": "power_in",
        "description": "Supply input for a 0.9 V to 1.8 V input range; bypass VIN to GND with a capacitor of at least 1 µF."
      },
      {
        "number": "4",
        "name": "C1+",
        "type": "passive",
        "description": "Positive terminal of the flying capacitor C1F."
      },
      {
        "number": "5",
        "name": "OUT1",
        "type": "power_out",
        "description": "2 × VIN power output, rated for a maximum of 40 mA when OUT2 is not loaded; bypass to GND with the output filter capacitor C(OUT1)."
      },
      {
        "number": "6",
        "name": "OUT2",
        "type": "power_out",
        "description": "Regulated 3-V power output on the TPS60313, rated for a maximum of 20 mA when OUT1 is not loaded; bypass to GND with the output filter capacitor C(OUT2)."
      },
      {
        "number": "7",
        "name": "C2+",
        "type": "passive",
        "description": "Positive terminal of the flying capacitor C2F."
      },
      {
        "number": "8",
        "name": "C2–",
        "type": "passive",
        "description": "Negative terminal of the flying capacitor C2F."
      },
      {
        "number": "9",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the device."
      },
      {
        "number": "10",
        "name": "PG",
        "type": "output",
        "description": "Power-good output that goes high when OUT2 reaches about 98% of its nominal value; on the TPS60313 it is a push-pull output, and any current drawn from PG reduces the maximum OUT2 output current."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: VIN is listed as an input (I) in the datasheet terminal table; it is typed power_in here as the supp; The flying-capacitor pins C1+, C1–, C2+ and C2– are not given an I/O direction in the datasheet, so "
        ],
        "pages_sent": 8,
        "cost_usd": 0.0536,
        "at": "2026-10-08T15:27:05"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/ds/symlink/tps60311.pdf",
        "pages": 28,
        "sha256": "032edc7b4bf6e40d",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 10,
        "described": 10,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps60313dgsr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b8f88eac3ce221c2ccb0b5048f9ad49c2ef4af148f8ae50c4e232e357683f547",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps60313dgsr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "d4a48111efe052b281a3c1479a76dae9bd7ebdc12cbbb28b7dbba9927b707894",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}