component
TPS60310DGSR
Public Made by Adomby adom
Texas Instruments DC-DC Converters, VSSOP-10-0.5mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTPS60310DGSR
Texas Instruments · DC-DC Converters · VSSOP-10-0.5mm
TPS60310DGSR from Texas Instruments, in a VSSOP-10-0.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SNOOZE | input | Snooze mode enable input: driving SNOOZE low enables snooze mode at low output current, and driving it high disables snooze mode. |
| 2 | C1- | passive | Negative terminal of the flying capacitor C1F. |
| 3 | VIN | power_in | Supply input for the 0.9 V to 1.8 V input range, to be bypassed to GND with a capacitor of at least 1 µF. |
| 4 | C1+ | passive | Positive terminal of the flying capacitor C1F. |
| 5 | OUT1 | power_out | 2 × VIN power output, to be bypassed to GND with output filter capacitor C(OUT1); OUT1 can deliver a maximum of 40 mA. |
| 6 | OUT2 | power_out | Regulated 3.3-V output on TPS60310 and TPS60312 (3-V on TPS60311 and TPS60313), to be bypassed to GND with output filter capacitor C(OUT2); OUT2 can deliver a maximum of 20 mA. |
| 7 | C2+ | passive | Positive terminal of the flying capacitor C2F. |
| 8 | C2- | passive | Negative terminal of the flying capacitor C2F. |
| 9 | GND | power_in | Ground reference for the device. |
| 10 | PG | output | Power-good output that goes high when OUT2 reaches about 98% of its nominal value; it is an open-drain output on TPS60310 (requires a pullup resistor, typically 100 kΩ to 1 MΩ, to OUT1 or OUT2) and a push-pull output on TPS60312/TPS60313. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-10-0.5mm |
| Category | Power Management (PMIC) |
| Pins | 10 |
CAD (KiCad official)
- Symbol:
TPS60310DGSR - Footprint:
Package_SO:MSOP-10_3x3mm_P0.5mm - 3D model: VSSOP-10-0.5mm (KiCad packages3D, STEP)
- 3D model files:
tps60310dgsr-etched.step/tps60310dgsr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps60310dgsr.step/tps60310dgsr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (28 pp, sha256
032edc7b4bf6e40d, retrieved 2026-10-11, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).