TPS60212DGSR

{
  "slug": "tps60212dgsr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments DC-DC Converters, VSSOP-10-0.5mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "tps60212dgsr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps60212dgsr.kicad_sym",
    "tps60212dgsr.kicad_mod",
    "tps60212dgsr.glb",
    "tps60212dgsr.step",
    "tps60212dgsr.lbr",
    "docs/hero.png",
    "docs/tps60212dgsr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tps60212dgsr-hero.glb",
    "tps60212dgsr-hero.overlay.json"
  ],
  "component": {
    "mpn": "TPS60212DGSR",
    "manufacturer": "Texas Instruments",
    "package": "VSSOP-10-0.5mm",
    "pin_count": 10,
    "category": "Power Supply Chip",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tps60210",
    "parts": {
      "symbol": "tps60212dgsr.kicad_sym",
      "footprint": "tps60212dgsr.kicad_mod",
      "model_3d": "tps60212dgsr-hero.glb",
      "model_3d_plain": "tps60212dgsr.glb",
      "model_3d_step": "tps60212dgsr-etched.step",
      "model_3d_step_plain": "tps60212dgsr.step",
      "lbr": "tps60212dgsr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2072461",
      "digikey": "TPS60212DGSR-ND",
      "mouser": "595-TPS60212DGSR"
    },
    "distributor_check": {
      "checked_at": "2026-10-08T15:33:53Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "TPS60212DGSR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-TPS60212DGSR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "LBI/GND",
        "type": "input",
        "description": "Low-battery detector input on the TPS60212; a low-battery warning is generated at LBO when the voltage on LBI drops below the 1.18-V threshold, and LBI should be tied to GND or VBAT if the detector is not used."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the device."
      },
      {
        "number": "3",
        "name": "C1−",
        "type": "passive",
        "description": "Negative terminal of flying capacitor C1."
      },
      {
        "number": "4",
        "name": "C1+",
        "type": "passive",
        "description": "Positive terminal of flying capacitor C1."
      },
      {
        "number": "5",
        "name": "OUT",
        "type": "power_out",
        "description": "Regulated 3.3-V power output, bypassed to GND with the output filter capacitor Co."
      },
      {
        "number": "6",
        "name": "C2+",
        "type": "passive",
        "description": "Positive terminal of flying capacitor C2."
      },
      {
        "number": "7",
        "name": "IN",
        "type": "power_in",
        "description": "Supply input, from 1.8 V to 3.6 V, to be bypassed to GND with a capacitor of at least 2.2 µF."
      },
      {
        "number": "8",
        "name": "C2−",
        "type": "passive",
        "description": "Negative terminal of flying capacitor C2."
      },
      {
        "number": "9",
        "name": "SNOOZE",
        "type": "input",
        "description": "Mode control: low selects snooze mode (about 2 µA, output held at 3.3 V ±6%, load limited to 2 mA), high selects normal operation, and an external clock applied here synchronizes the charge pump."
      },
      {
        "number": "10",
        "name": "LBO/PG",
        "type": "output",
        "description": "Open-drain low-battery output on the TPS60212, pulled low when LBI is below 1.18 V; a pullup should go to OUT or to a logic rail below 3.6 V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The DGS pin drawing and terminal table cover both the TPS60210/TPS60212 (LBI/LBO) and TPS60211/TPS60"
        ],
        "pages_sent": 9,
        "cost_usd": 0.0596,
        "at": "2026-10-08T15:33:29"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tps60210",
        "pages": 28,
        "sha256": "4cdd47bb12a89a6c",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 10,
        "described": 10,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps60212dgsr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b8f88eac3ce221c2ccb0b5048f9ad49c2ef4af148f8ae50c4e232e357683f547",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps60212dgsr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "29f45e6ada5476d5cc306e82517db73bda230db6ebd352f9bd31250a94eb4b53",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}