# TPS60210DGSR

**Texas Instruments** · Charge Pumps · MSOP-10

TPS60210DGSR from Texas Instruments, in a MSOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | LBI | input | Low-battery detector input for TPS60210; a low-battery warning is generated at LBO when the voltage on LBI drops below the 1.18-V threshold, and LBI should be connected to GND or VBAT if the detector is not used. |
| 2 | GND | power_in | Ground reference for the device. |
| 3 | C1− | passive | Negative terminal of the flying capacitor C1. |
| 4 | C1+ | passive | Positive terminal of the flying capacitor C1. |
| 5 | OUT | power_out | Regulated 3.3-V power output; bypass OUT to GND with the output filter capacitor Co. |
| 6 | C2+ | passive | Positive terminal of the flying capacitor C2. |
| 7 | IN | power_in | Supply input for the 1.8-V to 3.6-V input range; bypass IN to GND with a capacitor of a minimum of 2.2 µF. |
| 8 | C2− | passive | Negative terminal of the flying capacitor C2. |
| 9 | SNOOZE | input | Selects the operating mode: low programs snooze mode (output held at 3.3 V ±6%), high selects normal operation, and an external clock applied here synchronizes the charge pump. |
| 10 | LBO | output | Open-drain low-battery warning output for TPS60210, pulled low when the voltage on LBI drops below 1.18 V; a pullup resistor should go to OUT or to any logic supply rail lower than 3.6 V. |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | MSOP-10 |
| Category | Power Management (PMIC) |
| Pins | 10 |

## CAD (KiCad official)

- Symbol: `TPS60210DGSR`
- Footprint: `Package_SO:MSOP-10_3x3mm_P0.5mm`
- 3D model: MSOP-10 (KiCad packages3D, STEP)
- 3D model files: `tps60210dgsr-etched.step` / `tps60210dgsr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps60210dgsr.step` / `tps60210dgsr.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps60210) (28 pp, sha256 `4cdd47bb12a89a6c`, retrieved 2026-10-11, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/tps60210dgsr-datasheet.pdf)