TPS60100PWPR

{
  "slug": "tps60100pwpr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments DC-DC Converters, HTSSOP-20-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "tps60100pwpr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps60100pwpr.kicad_sym",
    "tps60100pwpr.kicad_mod",
    "tps60100pwpr.glb",
    "tps60100pwpr.step",
    "tps60100pwpr.lbr",
    "docs/hero.png",
    "docs/tps60100pwpr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tps60100pwpr-hero.glb",
    "tps60100pwpr-hero.overlay.json"
  ],
  "component": {
    "mpn": "TPS60100PWPR",
    "manufacturer": "Texas Instruments",
    "package": "HTSSOP-20-EP",
    "pin_count": 21,
    "category": "Power Supply Chip",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tps60100",
    "parts": {
      "symbol": "tps60100pwpr.kicad_sym",
      "footprint": "tps60100pwpr.kicad_mod",
      "model_3d": "tps60100pwpr-hero.glb",
      "model_3d_plain": "tps60100pwpr.glb",
      "model_3d_step": "tps60100pwpr-etched.step",
      "model_3d_step_plain": "tps60100pwpr.step",
      "lbr": "tps60100pwpr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2071668",
      "digikey": "296-31985-2-ND",
      "mouser": "595-TPS60100PWPR"
    },
    "distributor_check": {
      "checked_at": "2026-10-08T15:32:27Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-31985-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-TPS60100PWPR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Analog ground for the internal reference and control circuitry; connect to PGND through a short trace."
      },
      {
        "number": "2",
        "name": "SYNC",
        "type": "input",
        "description": "Selects the clock source: connect to GND to use the internal oscillator, or to IN for external synchronization, in which case the clock is fed through 3V8 and the device operates in regulated 3.3-V mode."
      },
      {
        "number": "3",
        "name": "ENABLE",
        "type": "input",
        "description": "Logic-low turns the device off, disconnects the output from the input and reduces supply current to 0.05 µA; ENABLE may go high only when VIN is inside the recommended operating range."
      },
      {
        "number": "4",
        "name": "FB",
        "type": "input",
        "description": "Feedback input; connect to OUT as close to the load as possible for best regulation, with an on-chip resistive divider matched to the 1.22-V internal reference."
      },
      {
        "number": "5",
        "name": "OUT",
        "type": "power_out",
        "description": "Regulated power output; connect both OUT pins through a short trace and bypass to GND with the output filter capacitor CO, giving 3.3 V when 3V8 is low and 3.8 V when 3V8 is high."
      },
      {
        "number": "6",
        "name": "C1+",
        "type": "passive",
        "description": "Positive terminal of the charge-pump capacitor C1F."
      },
      {
        "number": "7",
        "name": "IN",
        "type": "power_in",
        "description": "Supply input for the 1.8-V to 3.6-V input range; bypass to GND with a (CO/2) µF capacitor and connect both IN pins through a short trace."
      },
      {
        "number": "8",
        "name": "C1−",
        "type": "passive",
        "description": "Negative terminal of the charge-pump capacitor C1F."
      },
      {
        "number": "9",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground carrying the charge-pump current; connect all PGND pins together."
      },
      {
        "number": "10",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground carrying the charge-pump current; connect all PGND pins together."
      },
      {
        "number": "11",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground carrying the charge-pump current; connect all PGND pins together."
      },
      {
        "number": "12",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground carrying the charge-pump current; connect all PGND pins together."
      },
      {
        "number": "13",
        "name": "C2−",
        "type": "passive",
        "description": "Negative terminal of the charge-pump capacitor C2F."
      },
      {
        "number": "14",
        "name": "IN",
        "type": "power_in",
        "description": "Supply input for the 1.8-V to 3.6-V input range; bypass to GND with a (CO/2) µF capacitor and connect both IN pins through a short trace."
      },
      {
        "number": "15",
        "name": "C2+",
        "type": "passive",
        "description": "Positive terminal of the charge-pump capacitor C2F."
      },
      {
        "number": "16",
        "name": "OUT",
        "type": "power_out",
        "description": "Regulated power output; connect both OUT pins through a short trace and bypass to GND with the output filter capacitor CO, giving 3.3 V when 3V8 is low and 3.8 V when 3V8 is high."
      },
      {
        "number": "17",
        "name": "SKIP",
        "type": "input",
        "description": "Logic-low selects constant-frequency mode for minimum output ripple and noise; connection to IN selects pulse-skip mode, which gives the lowest quiescent current."
      },
      {
        "number": "18",
        "name": "COM",
        "type": "input",
        "description": "Logic-low selects push-pull charge-pump mode to minimize output ripple; connection to IN selects single-ended mode requiring only one flying capacitor."
      },
      {
        "number": "19",
        "name": "3V8",
        "type": "input",
        "description": "Mode select: logic-low gives the regulated 3.3-V output, while connection to IN gives the preregulated 3.8-V output."
      },
      {
        "number": "20",
        "name": "GND",
        "type": "power_in",
        "description": "Analog ground for the internal reference and control circuitry; connect to PGND through a short trace."
      },
      {
        "number": "21",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The exposed PowerPAD thermal pad is shown in Figure 2 but is not a numbered terminal in the datashee; The datasheet does not assign I/O types to the charge-pump terminals C1+, C1−, C2+ and C2−; they wer; Only the pin table on page 2 and the package/ordering pages were available in the supplied text (9 o",
          "exposed pad 21 added from the footprint"
        ],
        "pages_sent": 9,
        "cost_usd": 0.0694,
        "at": "2026-10-08T15:31:51"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tps60100",
        "pages": 29,
        "sha256": "5ab67e77c34fa2fd",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 21,
        "described": 21,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps60100pwpr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.41,
          6.5,
          1.2
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "f25728c0f84a3c1c77cd32221bb32551442b0ccc492dfd30173a3fa9a20e1adb",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps60100pwpr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.41,
          6.5,
          1.2
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "03e1b198c06307e501371ca5d1a62f86eb79a7f02f8b2669757b6caa07d06ca7",
        "checked": "2026-10-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}