component
TPS57040QDGQRQ1
Public Made by Adomby adom
Texas Instruments DC-DC Converters, HVSSOP-10-EP-0.5mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTPS57040QDGQRQ1
Texas Instruments · DC-DC Converters · HVSSOP-10-EP-0.5mm
TPS57040QDGQRQ1 from Texas Instruments, in a HVSSOP-10-EP-0.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BOOT | output | Bootstrap capacitor supply pin; output device is forced off if voltage drops below the minimum required by the output device. |
| 2 | VIN | power_in | Input supply voltage pin accepting 3.5 V to 42 V. |
| 3 | EN | input | Enable pin with internal pull-up current source; pull below 1.2 V to disable or float to enable device and adjust input undervoltage lockout with two resistors. |
| 4 | SS/TR | input | Slow-start and tracking input pin; external capacitor sets output rise time and voltage on this pin overrides internal reference for tracking and sequencing. |
| 5 | RT/CLK | input | Resistor timing and external clock input pin; holds fixed voltage with external resistor to ground for switching frequency setting or becomes high impedance clock input if pulled above PLL upper threshold. |
| 6 | PWRGD | output | Open drain power-good output; asserts low when output voltage is low due to thermal shutdown, dropout, overvoltage, or EN shutdown. |
| 7 | VSENSE | input | Inverting input node of the transconductance error amplifier for output voltage feedback. |
| 8 | COMP | output | Error amplifier output node and input to the output switch current comparator; connect frequency compensation components to this pin. |
| 9 | GND | power_in | Ground return pin. |
| 10 | PH | input | Source of the internal high-side power MOSFET switching node connecting to external inductor. |
| 11 | Thermal Pad | power_in | Exposed thermal pad on printed circuit board electrically connected to GND; must be connected for proper thermal and electrical operation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HVSSOP-10-EP-0.5mm |
| Category | Power Management (PMIC) |
| Pins | 11 |
CAD (KiCad official)
- Symbol:
TPS57040QDGQRQ1 - Footprint:
Package_SO:MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mm - 3D model: HVSSOP-10-EP-0.5mm (KiCad packages3D, STEP)
- 3D model files:
tps57040qdgqrq1-etched.step/tps57040qdgqrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps57040qdgqrq1.step/tps57040qdgqrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (52 pp, sha256
0b6cf4f7dfa43f02, retrieved 2026-10-06, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).