Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TPS563207DRLR

Texas Instruments · DC-DC Converters · SOT-563

TPS563207DRLR from Texas Instruments, in a SOT-563. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Input voltage supply pin, rated for 4.3 V to 17 V operating range.
2 SW output Switch node output connecting high-side and low-side MOSFETs to the inductor, voltage range -2 V to 19 V.
3 GND power_in Ground reference pin, source terminal of low-side MOSFET and controller circuit ground, connect feedback path at single point.
4 BST power_out Bootstrap supply output for high-side NFET gate driver circuit, maintain 0.1 µF bypass capacitor to SW pin.
5 EN input Enable input control active high, 1.35 V typical turn-on threshold, 0.9 V typical turn-off threshold, internal pull-down to GND.
6 FB input Converter feedback input pin for output voltage regulation, 806 mV nominal reference threshold with ±16 mV tolerance at 25°C.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-563
Category Power Management (PMIC)
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply input voltage range VIN 4.3 17 V 4
Input voltage range BST VI -0.1 23 V BST 4
Input voltage range BST (10 ns transient) VI -0.1 26 V BST (10 ns transient) 4
Input voltage range BST (vs SW) VI -0.1 6 V BST (vs SW) 4
Input voltage range EN VI -0.1 17 V EN 4
Input voltage range FB VI -0.1 5.5 V FB 4
Input voltage range SW VI -1.8 17 V SW 4
Input voltage range SW (10 ns transient) VI -3.5 20 V SW (10 ns transient) 4
Operating junction temperature TJ -40 125 °C 4
Input voltage VIN, EN -0.3 19 V 4
Input voltage BST -0.3 25 V 4
Input voltage BST (10 ns transient) -0.3 27 V 10 ns transient 4
Input voltage BST (vs SW) -0.3 6.5 V vs SW 4
Input voltage FB -0.3 6.5 V 4
Input voltage SW -2 19 V 4
Input voltage SW (10 ns transient) -3.5 21 V 10 ns transient 4
Operating junction temperature TJ -40 150 °C 4
Storage temperature Tstg -55 150 °C 4
Operating non-switching supply current IVIN 590 750 µA VIN current, EN = 5 V, VFB = 1 V 6
Shutdown supply current IVINSDN 1 3 µA VIN current, EN = 0 V 6
EN high-level input voltage VENH 1.35 1.6 V EN 6
EN low-level input voltage VENL 0.9 1.05 V EN 6
EN pin resistance to GND REN 225 400 900 kΩ VEN = 12 V 6
VFB threshold voltage VFBTH 790 806 822 mV TA = 25°C 6
VFB input current IFB -0.1 0 0.1 µA VFB = 1 V 6
Low side current limit Iocl 3.3 4.4 5.6 A Inductor valley current set point. 6
Low side FET sink current limit INocl_l_sink 1 1.5 2 A Inductor negative valley current set point. 6
Minimum off time tOFF(MIN) 220 310 ns VFB = 0.5 V 6
UVLO wake up VIN voltage UVLO 4 4.3 V 6
UVLO shutdown VIN voltage UVLO 3.3 3.6 V 6
Junction-to-ambient thermal resistance RθJA 137 °C/W 4
Junction-to-ambient thermal resistance with TI EVM board RθJA_effective 65 °C/W TI EVM board (2 layer, 2 oz copper), VIN = 12 V, VOUT = 5 V, IOUT = 3 A, TA = 25°C 4
Junction-to-case (top) thermal resistance RθJC(top) 43.2 °C/W 4
Junction-to-board thermal resistance RθJB 22 °C/W 4
Junction-to-top characterization parameter ψJT 0.9 °C/W 5
Junction-to-board characterization parameter ψJB 21.8 °C/W 5

CAD (KiCad official)

  • Symbol: TPS563207DRLR
  • Footprint: Package_TO_SOT_SMD:SOT-563
  • 3D model: SOT-563 (KiCad packages3D, STEP)
  • 3D model files: tps563207drlr-etched.step / tps563207drlr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps563207drlr.step / tps563207drlr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (28 pp, sha256 364ad8a1e2b239c6, retrieved 2026-09-26, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF