component
TPS562210ADDFT
Public Made by Adomby adom
Texas Instruments DC-DC Converters, TSOT-23-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTPS562210ADDFT
Texas Instruments · DC-DC Converters · TSOT-23-8
TPS562210ADDFT from Texas Instruments, in a TSOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin; source terminal of low-side power NFET and ground terminal for controller circuit, connect sensitive VFB to this GND at a single point. |
| 2 | SW | output | Switch node connection between high-side NFET and low-side NFET. |
| 3 | VIN | power_in | Input voltage supply pin; drain terminal of high-side power NFET. |
| 4 | PG | output | Power good open drain output. |
| 5 | SS | input | Soft-start control; external capacitor should be connected to GND. |
| 6 | VFB | input | Converter feedback input; connect to output voltage with feedback resistor divider. |
| 7 | EN | input | Enable input control; active high and must be pulled up to enable the device. |
| 8 | VBST | power_in | Supply input for high-side NFET gate drive circuit; connect 0.1 µF capacitor between VBST and SW pins. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSOT-23-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
TPS562210ADDFT - Footprint:
Package_TO_SOT_SMD:TSOT-23-8 - 3D model: TSOT-23-8 (KiCad packages3D, STEP)
- 3D model files:
tps562210addft-etched.step/tps562210addft-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps562210addft.step/tps562210addft.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (29 pp, sha256
93ccf335d18255b9, retrieved 2026-10-01, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).