component
TPS562210ADDFR
Public Made by Adomby adom
Texas Instruments DC-DC Converters, TSOT-23-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTPS562210ADDFR
Texas Instruments · DC-DC Converters · TSOT-23-8
TPS562210ADDFR from Texas Instruments, in a TSOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference and source terminal of low-side power MOSFET; connect as single-point junction for feedback networks to avoid ground noise coupling. |
| 2 | SW | output | Switch node connection between high-side and low-side power MOSFETs; connects to external output inductor; voltage rating -2 V to 19 V (transient: -3.5 V to 21 V). |
| 3 | VIN | power_in | Input voltage supply and drain terminal of high-side power MOSFET; recommended operating range 4.5 V to 17 V with 10 µF minimum ceramic decoupling capacitor. |
| 4 | PG | output | Power Good open-drain output indicating converter output regulation; active high when output voltage within ±10% of target threshold; requires external pull-up resistor. |
| 5 | SS | input | Soft-start control input; external capacitor to GND sets soft-start ramp time using internal charge current of 6 µA typical; operating voltage range -0.1 V to 5 V. |
| 6 | VFB | input | Feedback voltage input for output regulation via resistor divider; regulation threshold 0.765 V typical at 25°C (range 758-772 mV over temperature); input current ±0.1 µA. |
| 7 | EN | input | Enable control logic input; active high enables converter; logic high threshold 1.6 V, low threshold 0.6 V; internal pull-up resistance 225-900 kΩ to VIN. |
| 8 | VBST | power_in | Bootstrap supply for high-side MOSFET gate driver circuit; connect 0.1 µF ceramic capacitor to SW pin; operating voltage range -0.1 V to 23 V (6 V maximum relative to SW). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSOT-23-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
TPS562210ADDFR - Footprint:
Package_TO_SOT_SMD:TSOT-23-8 - 3D model: TSOT-23-8 (KiCad packages3D, STEP)
- 3D model files:
tps562210addfr-etched.step/tps562210addfr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps562210addfr.step/tps562210addfr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (29 pp, sha256
93ccf335d18255b9, retrieved 2026-09-23, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).