component
TPS562209DDCT
Public Made by Adomby adom
Texas Instruments DC-DC Converters, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTPS562209DDCT
Texas Instruments · DC-DC Converters · SOT-23-6
TPS562209DDCT from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin Source terminal of low-side power NFET as well as the ground terminal for controller circuit; Connect sensitive VFB to this GND at a single point. |
| 2 | SW | tri_state | Switch node connection between high-side NFET and low-side NFET. |
| 3 | VIN | power_in | Input voltage supply pin; The drain terminal of high-side power NFET. |
| 4 | VFB | input | Converter feedback input; Connect to output voltage with feedback resistor divider. |
| 5 | EN | input | Enable input control; Active high and must be pulled up to enable the device. |
| 6 | VBST | power_in | Supply input for the high-side NFET gate drive circuit; Connect 0.1 µF capacitor between VBST and SW pins. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
CAD (KiCad official)
- Symbol:
TPS562209DDCT - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
tps562209ddct-etched.step/tps562209ddct-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps562209ddct.step/tps562209ddct.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (30 pp, sha256
ec1b7876fc1cb980, retrieved 2026-09-24, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).