Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TPS560430YFDBVT

Texas Instruments · DC-DC Converters · SOT-23-6

TPS560430YFDBVT from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CB power_out Bootstrap capacitor connection for high-side FET gate driver; connect 100 nF ceramic capacitor from this pin to SW pin.
2 GND power_in Power ground terminal connected to low-side FET source and system ground; provide short path from CIN ground.
3 FB input Feedback input for external resistor divider output voltage setting; operating range 0 to 4.5 V, never short to ground during operation.
4 EN input Precision enable input with rising threshold 1.1-1.36 V and falling threshold 0.95-1.22 V; do not float, tie to VIN or logic signal.
5 VIN power_in Supply input terminal to internal bias LDO and high-side FET driver; operating range 4 to 36 V with bypass capacitors connected directly.
6 SW output Switching node output connected to high-side FET source and low-side FET drain; drive external power inductor for buck converter operation.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-6
Category Power Management (PMIC)
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VIN operation input voltage VIN 4 36 V 5
Rising UVLO threshold VIN_UVLO 3.55 3.75 4 V 5
Falling UVLO threshold VIN_UVLO 3.25 3.45 3.65 V 5
Shutdown current ISHDN 3 10 µA VEN = 0 V 5
Enable rising threshold voltage VEN_H 1.1 1.23 1.36 V 5
Enable falling threshold voltage VEN_L 0.95 1.1 1.22 V 5
Leakage current at EN pin IEN 10 200 nA VEN = 3.3 V 5
Reference voltage VREF 0.995 1 1.005 V TJ = 25 °C 5
Reference voltage VREF 0.985 1 1.015 V TJ = –40 °C to 125 °C 5
Leakage current at FB pin IFB 0.2 50 nA VFB = 1.2 V 5
Peak inductor current limit IHS_LIMIT 0.8 1.1 1.4 A 5
Valley inductor current limit ILS_LIMIT 0.62 0.8 0.98 A 5
Negative current limit (FPWM version) ILS_NEG -0.7 -0.5 -0.3 A 5
Oscillator frequency fSW 1.785 2.1 2.415 MHz 2.1-MHz version 6
Input voltage VIN to GND VIN 4 36 V 4
EN pin voltage VEN 0 V 4
FB pin voltage VFB 0 4.5 V 4
Output voltage VOUT 1 V 4
Output current IOUT 0 600 mA 4
Operating junction temperature range TJ -40 125 °C 4
VIN to GND VIN -0.3 38 V 4
EN to GND VEN -0.3 V 4
FB to GND VFB -0.3 5.5 V 4
SW to GND VSW -0.3 V 4
SW to GND transient VSW -3.5 38 V less than 10 ns transient 4
CB to SW VCB-SW -0.3 5.5 V 4
Junction temperature TJ -40 150 °C 4
Storage temperature Tstg -65 150 °C 4
Junction-to-ambient thermal resistance RθJA 173 °C/W DBV (6 pins) package 4
Junction-to-case (TOP) thermal resistance RθJC_T 116 °C/W DBV (6 pins) package 4
Junction-to-case (BOTTOM) thermal resistance RθJC_B 31 °C/W DBV (6 pins) package 4
Junction-to-top characterization parameter ψJT 20 °C/W DBV (6 pins) package 4
Junction-to-board characterization parameter ψJB 30 °C/W DBV (6 pins) package 4

CAD (KiCad official)

  • Symbol: TPS560430YFDBVT
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: tps560430yfdbvt-etched.step / tps560430yfdbvt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps560430yfdbvt.step / tps560430yfdbvt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (34 pp, sha256 f5d28f16b7ee0c6e, retrieved 2026-09-26, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF