Generated by kicad-footprint-generator · KiCad file format 20260206
TPS54810PWPR
Texas Instruments · DC-DC Converters · HTSSOP-28-EP
TPS54810PWPR from Texas Instruments, in a HTSSOP-28-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | AGND | power_in | Analog ground and return for the compensation network, output divider, slow-start capacitor, VBIAS capacitor, RT resistor and SYNC pin; connect PowerPAD to AGND. |
| 2 | VSENSE | input | Error amplifier inverting input, connected to the output voltage through the compensation network and output divider. |
| 3 | COMP | output | Error amplifier output; connect the frequency compensation network from COMP to VSENSE. |
| 4 | PWRGD | output | Open-drain power good output that is high-Z when VSENSE is at or above 90% of Vref and low otherwise, and is low when SS/ENA is low or the internal shutdown is active. |
| 5 | BOOT | input | Bootstrap input; a 0.022-µF to 0.1-µF low-ESR capacitor from BOOT to PH generates the floating drive for the high-side FET driver. |
| 6 | PH | bidirectional | Phase input/output at the junction of the internal high-side and low-side power MOSFETs and the output inductor. |
| 7 | PH | bidirectional | Phase input/output at the junction of the internal high-side and low-side power MOSFETs and the output inductor. |
| 8 | PH | bidirectional | Phase input/output at the junction of the internal high-side and low-side power MOSFETs and the output inductor. |
| 9 | PH | bidirectional | Phase input/output at the junction of the internal high-side and low-side power MOSFETs and the output inductor. |
| 10 | PH | bidirectional | Phase input/output at the junction of the internal high-side and low-side power MOSFETs and the output inductor. |
| 11 | PH | bidirectional | Phase input/output at the junction of the internal high-side and low-side power MOSFETs and the output inductor. |
| 12 | PH | bidirectional | Phase input/output at the junction of the internal high-side and low-side power MOSFETs and the output inductor. |
| 13 | PH | bidirectional | Phase input/output at the junction of the internal high-side and low-side power MOSFETs and the output inductor. |
| 14 | PH | bidirectional | Phase input/output at the junction of the internal high-side and low-side power MOSFETs and the output inductor. |
| 15 | PGND | power_in | Power ground and high-current return for the low-side driver and power MOSFET; a single point connection to AGND is recommended. |
| 16 | PGND | power_in | Power ground and high-current return for the low-side driver and power MOSFET; a single point connection to AGND is recommended. |
| 17 | PGND | power_in | Power ground and high-current return for the low-side driver and power MOSFET; a single point connection to AGND is recommended. |
| 18 | PGND | power_in | Power ground and high-current return for the low-side driver and power MOSFET; a single point connection to AGND is recommended. |
| 19 | PGND | power_in | Power ground and high-current return for the low-side driver and power MOSFET; a single point connection to AGND is recommended. |
| 20 | VIN | power_in | Input supply for the power MOSFET switches and internal bias regulator; bypass to PGND close to the package with a high quality, low-ESR 10-µF ceramic capacitor. |
| 21 | VIN | power_in | Input supply for the power MOSFET switches and internal bias regulator; bypass to PGND close to the package with a high quality, low-ESR 10-µF ceramic capacitor. |
| 22 | VIN | power_in | Input supply for the power MOSFET switches and internal bias regulator; bypass to PGND close to the package with a high quality, low-ESR 10-µF ceramic capacitor. |
| 23 | VIN | power_in | Input supply for the power MOSFET switches and internal bias regulator; bypass to PGND close to the package with a high quality, low-ESR 10-µF ceramic capacitor. |
| 24 | VIN | power_in | Input supply for the power MOSFET switches and internal bias regulator; bypass to PGND close to the package with a high quality, low-ESR 10-µF ceramic capacitor. |
| 25 | VBIAS | power_out | Internal bias regulator output supplying internal circuitry; bypass to AGND with a high quality, low-ESR 0.1-µF to 1.0-µF ceramic capacitor. |
| 26 | SS/ENA | bidirectional | Dual-function slow-start/enable pin providing a logic input to enable or disable the device and a capacitor input to externally set the start-up time. |
| 27 | SYNC | input | Dual-function synchronization input for an external oscillator or for selecting between two internally set switching frequencies; when synchronizing externally, a resistor must be connected to RT. |
| 28 | RT | input | Frequency setting resistor input; connect a resistor from RT to AGND to set the switching frequency, set at or slightly below the external oscillator frequency when SYNC is used. |
| 29 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HTSSOP-28-EP |
| Category | Power Supply Chip |
| Pins | 29 |
CAD (KiCad official)
- Symbol:
TPS54810PWPR - Footprint:
Package_SO:TSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP2.85x6.7mm - 3D model: HTSSOP-28-EP (KiCad packages3D, STEP)
- 3D model files:
tps54810pwpr-etched.step/tps54810pwpr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps54810pwpr.step/tps54810pwpr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (24 pp, sha256
ca37d3ac90f97eb2, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).