TPS54561DPRR

{
  "schema_version": 1,
  "type": "component",
  "slug": "tps54561dprr",
  "title": "TPS54561DPRR",
  "brief": "Texas Instruments DC-DC Converters, WSON-10-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "power management (pmic)",
    "tps54561dprr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "TPS54561DPRR",
    "manufacturer": "Texas Instruments",
    "package": "WSON-10-EP(4x4)",
    "pin_count": 11,
    "category": "Power Management (PMIC)",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tps54561",
    "parts": {
      "symbol": "tps54561dprr.kicad_sym",
      "footprint": "tps54561dprr.kicad_mod",
      "model_3d": "tps54561dprr-hero.glb",
      "model_3d_plain": "tps54561dprr.glb",
      "model_3d_step": "tps54561dprr-etched.step",
      "model_3d_step_plain": "tps54561dprr.step",
      "lbr": "tps54561dprr.lbr"
    },
    "distributor_links": {
      "lcsc": "C180369",
      "digikey": "296-40803-2-ND",
      "mouser": "595-TPS54561DPRR"
    },
    "distributor_check": {
      "checked_at": "2026-10-10T20:14:15Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-40803-2-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-TPS54561DPRR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "BOOT",
        "type": "output",
        "description": "A bootstrap capacitor is required between BOOT and SW; if its voltage falls below the minimum needed to operate the high-side MOSFET, the gate drive is switched off until the capacitor is refreshed."
      },
      {
        "number": "2",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply voltage with a 4.5-V to 60-V operating range."
      },
      {
        "number": "3",
        "name": "EN",
        "type": "input",
        "description": "Enable pin with an internal pull-up current source; pull below 1.2 V to disable and float to enable, with input undervoltage lockout adjustable by two resistors."
      },
      {
        "number": "4",
        "name": "SS/TR",
        "type": "input",
        "description": "Soft-start and tracking pin; an external capacitor sets the output rise time, and the voltage on this pin overrides the internal reference so it can be used for tracking and sequencing."
      },
      {
        "number": "5",
        "name": "RT/CLK",
        "type": "input",
        "description": "Resistor timing and external clock pin; an external resistor to ground sets the switching frequency, and pulling the pin above the PLL upper threshold makes it a high-impedance synchronization clock input."
      },
      {
        "number": "6",
        "name": "FB",
        "type": "input",
        "description": "Inverting input of the transconductance (gm) error amplifier."
      },
      {
        "number": "7",
        "name": "COMP",
        "type": "output",
        "description": "Error amplifier output and input to the output switch current (PWM) comparator; frequency compensation components connect to this pin."
      },
      {
        "number": "8",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin that must be electrically connected to the exposed thermal pad on the printed circuit board for proper operation."
      },
      {
        "number": "9",
        "name": "SW",
        "type": "output",
        "description": "Source of the internal high-side power MOSFET and the switching node of the converter."
      },
      {
        "number": "10",
        "name": "PWRGD",
        "type": "output",
        "description": "Open-drain Power Good output that asserts low if the output is out of regulation due to thermal shutdown, dropout, over-voltage, or EN shutdown."
      },
      {
        "number": "11",
        "name": "Thermal Pad",
        "type": "power_in",
        "description": "Exposed thermal pad that must be electrically connected to GND on the printed circuit board for proper operation."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Datasheet lists BOOT as I/O 'O'; mapped to KiCad 'output' since it is the high-side gate-drive boots; Datasheet table lists SW as I/O 'I', but the description calls it the source of the high-side MOSFET; Thermal pad is unnumbered in the datasheet (the figure shows pins 1-10 only) and has no I/O entry in"
        ],
        "pages_sent": 8,
        "cost_usd": 0.0476,
        "at": "2026-10-10T20:14:02"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tps54561",
        "pages": 55,
        "sha256": "100a710f731868d0",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 11,
        "described": 11,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps54561dprr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4,
          3.95,
          0.8
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "ef3c2f392fea7049285bfc942095cbd03d5bb47d74597dd80d1bc887363be656",
        "checked": "2026-10-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps54561dprr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4,
          3.95,
          0.8
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "6634449d0a550c3457d535a8c1e540b067aadceb826bfaa467616f7a5e07fa55",
        "checked": "2026-10-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "WSON-10-EP(4x4)",
      "Category": "Power Management (PMIC)",
      "Pins": "11"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "tps54561dprr"
  ],
  "discovery_pitch": "TPS54561DPRR (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps54561dprr.kicad_sym",
    "tps54561dprr.kicad_mod",
    "tps54561dprr.glb",
    "tps54561dprr.step",
    "tps54561dprr.lbr",
    "docs/hero.png",
    "docs/tps54561dprr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tps54561dprr-hero.glb",
    "tps54561dprr-hero.overlay.json"
  ],
  "visibility": {
    "public": true
  }
}