component
TPS54560DDAR
Public Made by Adomby adom
Texas Instruments DC-DC Converters, SOIC-8-EP. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+122−8@@ -1,13 +1,132 @@ {+ "schema_version": 1,+ "type": "component", "slug": "tps54560ddar",+ "title": "TPS54560DDAR",+ "brief": "Texas Instruments DC-DC Converters, SOIC-8-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "Texas Instruments DC-DC Converters, SOIC-8-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "pmic", "tps54560ddar" ],+ "component": {+ "mpn": "TPS54560DDAR",+ "manufacturer": "Texas Instruments",+ "package": "SOIC-8-EP",+ "pin_count": 9,+ "category": "PMIC",+ "subcategory": "DC-DC Converters",+ "datasheet": "https://www.ti.com/lit/ds/symlink/tps54560ddar.pdf",+ "parts": {+ "symbol": "tps54560ddar.kicad_sym",+ "footprint": "tps54560ddar.kicad_mod",+ "model_3d": "tps54560ddar.glb",+ "model_3d_step": "tps54560ddar.step",+ "lbr": "tps54560ddar.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "BOOT",+ "type": "passive",+ "description": "Bootstrap capacitor node for high-side MOSFET gate drive. A bootstrap capacitor is required between BOOT and SW; if the voltage on this capacitor falls below the minimum required to operate the high-side MOSFET, the output is switched off until the capacitor is refreshed. BOOT-SW absolute maximum is 8 V."+ },+ {+ "number": "2",+ "name": "VIN",+ "type": "power_in",+ "description": "Input supply voltage with 4.5 V to 60 V operating range (absolute maximum 65 V). Provides power to the internal high-side MOSFET and control circuitry."+ },+ {+ "number": "3",+ "name": "EN",+ "type": "input",+ "description": "Enable input with internal pull-up current source (~1.2 \u00b5A). Pull below 1.2 V to disable; float to enable. Can be used with two resistors to program input undervoltage lockout. Absolute maximum 8.4 V."+ },+ {+ "number": "4",+ "name": "RT/CLK",+ "type": "bidirectional",+ "description": "Resistor Timing and External Clock input. An internal amplifier holds this terminal at a fixed voltage when using an external resistor to ground to set the switching frequency (100 kHz to 2.5 MHz). If pulled above the PLL upper threshold, the terminal becomes a synchronization clock input (160 kHz to 2.3 MHz). Absolute maximum 3.6 V."+ },+ {+ "number": "5",+ "name": "FB",+ "type": "input",+ "description": "Inverting input of the transconductance (gm) error amplifier. Regulates to the internal 0.8 V reference. Absolute maximum 3 V."+ },+ {+ "number": "6",+ "name": "COMP",+ "type": "output",+ "description": "Error amplifier output and input to the output switch current (PWM) comparator. Connect frequency compensation components (Type-II RC network) between COMP and GND. Absolute maximum 3 V."+ },+ {+ "number": "7",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground reference. Must be connected to the exposed thermal pad on the PCB for proper operation."+ },+ {+ "number": "8",+ "name": "SW",+ "type": "power_out",+ "description": "Source of the internal high-side power MOSFET and switching node of the converter. Connect to the output inductor and catch (Schottky) diode. Absolute maximum -0.6 V to 65 V (-2 V for 10 ns transients)."+ },+ {+ "number": "9",+ "name": "Thermal Pad",+ "type": "power_in",+ "description": "Exposed thermal pad on the bottom of the package. Must be electrically connected to the GND terminal on the PCB and to a copper heat-sinking area for proper thermal and electrical operation."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://www.ti.com/lit/ds/symlink/tps54560ddar.pdf",+ "pages": 46,+ "sha256": "0ac3f17dc0fba7b9",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 9,+ "described": 9,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "Texas Instruments",+ "Package": "SOIC-8-EP",+ "Category": "PMIC",+ "Pins": "9"+ }+ },+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "tps54560ddar"+ ],+ "discovery_pitch": "TPS54560DDAR (Texas Instruments) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +144,5 @@ "docs/tps54560ddar-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }