← Commit history

Initial commit: component/tps54383pwpr

Ray ·1321f28083 ·
2 files changed +237
README.mdadded+51
@@ -0,0 +1,51 @@+# TPS54383PWPR++**Texas Instruments** · DC-DC Converters · HTSSOP-14-EP++TPS54383PWPR from Texas Instruments, in a HTSSOP-14-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | PVDD1 | power_in | Power input to the Output 1 high-side MOSFET; bypass locally to GND with 10-μF or greater low-ESR ceramic capacitor. |+| 2 | BOOT1 | input | Gate driver supply input for Output 1; connect 22-nF to 82-nF capacitor from this pin to SW1, charged from BP through internal switch during converter OFF time. |+| 3 | SW1 | output | Switching output (source) for Output 1 PWM; a snubber is recommended to reduce ringing on this node. |+| 4 | GND | power_in | Ground pin for the device; connect directly to Thermal Pad. |+| 5 | EN1 | input | Active-low enable input for Output 1; disables above 1.55V, enables below 0.9V, driven to PVDD2 when floating; connect to GND for always-ON operation. |+| 6 | EN2 | input | Active-low enable input for Output 2; disables above 1.55V, enables below 0.9V, driven to PVDD2 when floating; connect to GND for always-ON operation. |+| 7 | FB1 | input | Feedback input for Output 1; internal error amplifier regulates this pin to 0.8-V reference through external resistor divider from output to ground. |+| 8 | FB2 | input | Feedback input for Output 2; internal error amplifier regulates this pin to 0.8-V reference through external resistor divider from output to ground. |+| 9 | ILIM2 | input | Current limit selection pin for Output 2 only; connection to BP sets 4.5A limit, floating sets 3.0A limit, GND sets 1.5A limit; includes internal 150-kΩ divider. |+| 10 | SEQ | input | Output startup sequencing control; connection to BP enables sequential mode (Output 1 slave), GND enables sequential mode (Output 2 slave), or floating for ratiometric startup; includes internal 150-kΩ divider. |+| 11 | BP | power_out | Regulated bootstrap supply output for gate drivers; internally generated 5.25-V supply; bypass to GND with 4.7-μF to 10-μF low-ESR ceramic capacitor. |+| 12 | SW2 | output | Switching output (source) for Output 2 PWM; a snubber is recommended to reduce ringing on this node. |+| 13 | BOOT2 | input | Gate driver supply input for Output 2; connect 22-nF to 82-nF capacitor from this pin to SW2, charged from BP through internal switch during converter OFF time. |+| 14 | PVDD2 | power_in | Power input to device control circuitry, EN1/EN2 pull-up driver, and Output 2 high-side MOSFET; bypass to GND with 10-μF or greater low-ESR ceramic capacitor; UVLO monitors this pin and enables device above 4.1V. |+| 15 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | HTSSOP-14-EP |+| Category | Power Management (PMIC) |+| Pins | 15 |++## CAD (KiCad official)++- Symbol: `TPS54383PWPR`+- Footprint: `Package_SO:TSSOP-14-1EP_4.4x5mm_P0.65mm`+- 3D model: HTSSOP-14-EP (KiCad packages3D, STEP)+- 3D model files: `tps54383pwpr-etched.step` / `tps54383pwpr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps54383pwpr.step` / `tps54383pwpr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps54383) (56 pp, sha256 `39fce6f59b613d37`, retrieved 2026-09-24, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps54383pwpr-datasheet.pdf)
page.jsonadded+186
@@ -0,0 +1,186 @@+{+  "slug": "tps54383pwpr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments DC-DC Converters, HTSSOP-14-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "tps54383pwpr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "tps54383pwpr.kicad_sym",+    "tps54383pwpr.kicad_mod",+    "tps54383pwpr.glb",+    "tps54383pwpr.step",+    "tps54383pwpr.lbr",+    "docs/hero.png",+    "docs/tps54383pwpr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "TPS54383PWPR",+    "manufacturer": "Texas Instruments",+    "package": "HTSSOP-14-EP",+    "pin_count": 15,+    "category": "Power Management (PMIC)",+    "subcategory": "DC-DC Converters",+    "datasheet": "https://www.ti.com/cn/lit/gpn/tps54383",+    "parts": {+      "symbol": "tps54383pwpr.kicad_sym",+      "footprint": "tps54383pwpr.kicad_mod",+      "model_3d": "tps54383pwpr-etched.glb",+      "model_3d_plain": "tps54383pwpr.glb",+      "model_3d_step": "tps54383pwpr-etched.step",+      "model_3d_step_plain": "tps54383pwpr.step",+      "lbr": "tps54383pwpr.lbr"+    },+    "distributor_links": {+      "lcsc": "C96376"+    },+    "pins": [+      {+        "number": "1",+        "name": "PVDD1",+        "type": "power_in",+        "description": "Power input to the Output 1 high-side MOSFET; bypass locally to GND with 10-μF or greater low-ESR ceramic capacitor."+      },+      {+        "number": "2",+        "name": "BOOT1",+        "type": "input",+        "description": "Gate driver supply input for Output 1; connect 22-nF to 82-nF capacitor from this pin to SW1, charged from BP through internal switch during converter OFF time."+      },+      {+        "number": "3",+        "name": "SW1",+        "type": "output",+        "description": "Switching output (source) for Output 1 PWM; a snubber is recommended to reduce ringing on this node."+      },+      {+        "number": "4",+        "name": "GND",+        "type": "power_in",+        "description": "Ground pin for the device; connect directly to Thermal Pad."+      },+      {+        "number": "5",+        "name": "EN1",+        "type": "input",+        "description": "Active-low enable input for Output 1; disables above 1.55V, enables below 0.9V, driven to PVDD2 when floating; connect to GND for always-ON operation."+      },+      {+        "number": "6",+        "name": "EN2",+        "type": "input",+        "description": "Active-low enable input for Output 2; disables above 1.55V, enables below 0.9V, driven to PVDD2 when floating; connect to GND for always-ON operation."+      },+      {+        "number": "7",+        "name": "FB1",+        "type": "input",+        "description": "Feedback input for Output 1; internal error amplifier regulates this pin to 0.8-V reference through external resistor divider from output to ground."+      },+      {+        "number": "8",+        "name": "FB2",+        "type": "input",+        "description": "Feedback input for Output 2; internal error amplifier regulates this pin to 0.8-V reference through external resistor divider from output to ground."+      },+      {+        "number": "9",+        "name": "ILIM2",+        "type": "input",+        "description": "Current limit selection pin for Output 2 only; connection to BP sets 4.5A limit, floating sets 3.0A limit, GND sets 1.5A limit; includes internal 150-kΩ divider."+      },+      {+        "number": "10",+        "name": "SEQ",+        "type": "input",+        "description": "Output startup sequencing control; connection to BP enables sequential mode (Output 1 slave), GND enables sequential mode (Output 2 slave), or floating for ratiometric startup; includes internal 150-kΩ divider."+      },+      {+        "number": "11",+        "name": "BP",+        "type": "power_out",+        "description": "Regulated bootstrap supply output for gate drivers; internally generated 5.25-V supply; bypass to GND with 4.7-μF to 10-μF low-ESR ceramic capacitor."+      },+      {+        "number": "12",+        "name": "SW2",+        "type": "output",+        "description": "Switching output (source) for Output 2 PWM; a snubber is recommended to reduce ringing on this node."+      },+      {+        "number": "13",+        "name": "BOOT2",+        "type": "input",+        "description": "Gate driver supply input for Output 2; connect 22-nF to 82-nF capacitor from this pin to SW2, charged from BP through internal switch during converter OFF time."+      },+      {+        "number": "14",+        "name": "PVDD2",+        "type": "power_in",+        "description": "Power input to device control circuitry, EN1/EN2 pull-up driver, and Output 2 high-side MOSFET; bypass to GND with 10-μF or greater low-ESR ceramic capacitor; UVLO monitors this pin and enables device above 4.1V."+      },+      {+        "number": "15",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Thermal Pad (bottom side) is documented in pin function table but not assigned a traditional numbere",+          "exposed pad 15 added from the footprint"+        ],+        "pages_sent": 56,+        "cost_usd": 0.5085,+        "at": "2026-09-24T08:10:42"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/tps54383",+        "pages": 56,+        "sha256": "39fce6f59b613d37",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 15,+        "described": 15,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file