TPS54360

@@ -1,8 +1,11 @@ {+  "schema_version": 1,+  "type": "component",   "slug": "tps54360",+  "title": "TPS54360",+  "brief": "TI 60 V, 3.5 A synchronous-rectified step-down converter, HSOP-8 PowerPAD. Wide input, integrated FET. Datasheet-verified.",   "version": "0.1.0",-  "type": "component",-  "description": "TI 60 V, 3.5 A synchronous-rectified step-down converter, HSOP-8 PowerPAD. Wide input, integrated FET. Datasheet-verified.",+  "license": "CC-BY-SA-4.0",   "tags": [     "component",     "power",@@ -12,6 +15,128 @@     "hsop-8",     "texas-instruments"   ],+  "component": {+    "mpn": "TPS54360",+    "manufacturer": "Texas Instruments",+    "package": "HSOP-8 (PowerPAD)",+    "pin_count": 9,+    "category": "Power Management",+    "subcategory": "Switching regulator (buck)",+    "datasheet": "https://www.ti.com/lit/ds/symlink/tps54360.pdf",+    "parts": {+      "symbol": "tps54360.kicad_sym",+      "footprint": "tps54360.kicad_mod",+      "model_3d": "tps54360.glb",+      "model_3d_step": "tps54360.step",+      "lbr": "tps54360.lbr"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "BOOT",+        "type": "passive",+        "description": "Bootstrap capacitor node for the high-side MOSFET gate driver. A ceramic capacitor (typically 0.1 \u00b5F) is required between BOOT and SW. If VBOOT-VSW falls below the UVLO threshold, switching is halted until the bootstrap capacitor is refreshed."+      },+      {+        "number": "2",+        "name": "VIN",+        "type": "power_in",+        "description": "Input supply voltage. Operating range 4.5 V to 60 V (65 V absolute max). Bypass locally with a low-ESR ceramic capacitor to GND."+      },+      {+        "number": "3",+        "name": "EN",+        "type": "input",+        "description": "Enable input with internal pull-up current source. Pull below ~1.2 V to disable the converter, float to enable. Programmable UVLO can be set with an external resistor divider from VIN. Absolute max 8.4 V."+      },+      {+        "number": "4",+        "name": "RT/CLK",+        "type": "bidirectional",+        "description": "Resistor Timing and External Clock input. Connect a resistor to GND to program the switching frequency (100 kHz to 2.5 MHz). Alternatively, drive with an external clock (above the PLL upper threshold) to synchronize the internal oscillator; upon loss of clock, the device reverts to resistor-programmed frequency."+      },+      {+        "number": "5",+        "name": "FB",+        "type": "input",+        "description": "Inverting input of the transconductance (gm) error amplifier. Connect to the output through a resistor divider to program VOUT relative to the internal 0.8 V reference."+      },+      {+        "number": "6",+        "name": "COMP",+        "type": "output",+        "description": "Error amplifier output and input to the output switch current (PWM) comparator. Connect the loop-compensation network (typically series R+C with an optional parallel C) between COMP and GND."+      },+      {+        "number": "7",+        "name": "GND",+        "type": "power_in",+        "description": "Device ground return. Must be electrically tied to the exposed thermal PowerPAD on the PCB for proper operation."+      },+      {+        "number": "8",+        "name": "SW",+        "type": "power_out",+        "description": "Switch node - source of the internal high-side power MOSFET and switching node of the buck converter. Connects to the output inductor and the cathode of the external catch (Schottky) diode. Rated \u22120.6 V to 65 V (\u22122 V for 10-ns transients)."+      },+      {+        "number": "9",+        "name": "Thermal Pad",+        "type": "power_in",+        "description": "Exposed thermal PowerPAD on the package underside. Must be electrically connected to the GND pin/plane on the PCB for proper operation and to conduct heat out of the device."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://www.ti.com/lit/ds/symlink/tps54360.pdf",+        "pages": 50,+        "sha256": "c2743e51e9f180e3",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 9,+        "described": 9,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "metadata": {+    "specs": {+      "Type": "Step-down (buck) converter",+      "Input": "4.5-60 V",+      "Output current": "3.5 A",+      "Integrated FET": "High-side (asynchronous)",+      "Switching freq": "Adjustable / sync (RT/CLK)",+      "Features": "Adjustable EN, external compensation",+      "Package": "HSOP-8 (PowerPAD)"+    }+  },+  "sections": [+    "hero",+    "viewers",+    "readme",+    "breadcrumbs",+    "info"+  ],+  "discovery_triggers": [+    "tps54360",+    "60v buck converter",+    "wide input step down",+    "3.5a buck regulator"+  ],+  "discovery_pitch": "TI TPS54360 60 V 3.5 A step-down converter (HSOP-8 PowerPAD) with datasheet-verified pinout, KiCad symbol/footprint/3D, and full provenance.",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  },   "dependencies": {},   "hero": {     "type": "image",@@ -29,10 +154,5 @@     "docs/tps54360-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": "public",-  "author": {-    "name": "Ray",-    "email": "[email protected]"-  }+  ] }\ No newline at end of file