component
TPS54326PWPR
Public Made by Adomby adom
Texas Instruments DC-DC Converters, HTSSOP-14-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTPS54326PWPR
Texas Instruments · DC-DC Converters · HTSSOP-14-EP
TPS54326PWPR from Texas Instruments, in a HTSSOP-14-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VO | output | Converter output voltage pin; used for on-time adjustment through external feedback network. |
| 2 | VFB | input | Feedback input pin; connect external resistor divider network from VO to this pin for voltage regulation. |
| 3 | VREG5 | power_out | 5.5V regulated power supply output for control circuitry; 1μF ceramic capacitor to GND required. |
| 4 | SS | input | Soft-start control pin; external capacitor to GND sets adjustable start-up time. |
| 5 | GND | power_in | Signal ground reference pin. |
| 6 | PG | output | Open-drain power good output; pulls high when output voltage within ±10% of target. |
| 7 | EN | input | Enable control input; logic high (≥1.5V) enables converter, logic low (<0.4V) disables and discharges output. |
| 8 | PGND1 | power_in | Ground return for low-side MOSFET and current comparator input; connect to power ground plane. |
| 9 | PGND2 | power_in | Ground return for low-side MOSFET and current comparator input; connect to power ground plane. |
| 10 | SW1 | output | Switch node between high-side and low-side MOSFETs; also serves as current comparator input. |
| 11 | SW2 | output | Switch node between high-side and low-side MOSFETs; also serves as current comparator input. |
| 12 | VBST | power_in | Bootstrap supply input for high-side MOSFET gate driver; 0.1μF ceramic capacitor to SW terminals required. |
| 13 | VIN | power_in | Power input connected to high-side MOSFET drain; operating range 2V to 18V. |
| 14 | VCC | power_in | Supply input for 5V internal linear regulator and control circuitry; recommended operating range 4.5V to 18V. |
| 15 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HTSSOP-14-EP |
| Category | Power Management (PMIC) |
| Pins | 15 |
CAD (KiCad official)
- Symbol:
TPS54326PWPR - Footprint:
Package_SO:TSSOP-14-1EP_4.4x5mm_P0.65mm - 3D model: HTSSOP-14-EP (KiCad packages3D, STEP)
- 3D model files:
tps54326pwpr-etched.step/tps54326pwpr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps54326pwpr.step/tps54326pwpr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (37 pp, sha256
aaf09f8fad2f58fb, retrieved 2026-09-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).