3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTPS5431DDAR
Texas Instruments · DC-DC Converters · SO-8
TPS5431DDAR from Texas Instruments, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BOOT | output | Bootstrap capacitor output for high-side MOSFET gate driver; connect 0.01µF low-ESR ceramic capacitor between BOOT and PH pins. |
| 2 | NC | unconnected | Internally unconnected. |
| 3 | NC | unconnected | Internally unconnected. |
| 4 | VSENSE | input | Feedback voltage input connected to output voltage divider; VSENSE pin voltage must equal 1.221V internal reference for proper regulation. |
| 5 | ENA | input | Enable/disable control input; device stops switching below 0.5V and begins switching above 1.3V with 325mV hysteresis; internal 1.5MΩ pull-up allows floating operation. |
| 6 | GND | power_in | Ground reference connected to exposed thermal pad DAP for proper operation and thermal dissipation. |
| 7 | VIN | power_in | Input supply voltage (5.5V to 23V for TPS5431); bypass to GND within 1mm with 4.7µF minimum low-ESR ceramic capacitor. |
| 8 | PH | output | Switching output (high-side MOSFET source) for connection to external inductor, freewheeling diode, and BOOT capacitor; steady-state voltage range -0.6V to 25V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SO-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 输入电压 VIN 至 GND(TPS5431) | VIN | -0.3 | 25 | V | 4 | ||
| 输入电压 ENA 至 GND | -0.3 | 7 | V | 4 | |||
| 输入电压 VSENSE 至 GND | -0.3 | 3 | V | 4 | |||
| 输出电压 BOOT 至 PH | -0.3 | 6 | V | 4 | |||
| 输出电压 PH 至 GND(稳态,TPS5431) | -0.6 | 25 | V | 稳态 | 4 | ||
| 输出电压 PH 至 GND(瞬态) | -1.2 | V | 瞬态 < 10ns | 4 | |||
| 拉电流 PH 漏电流 | 10 | µA | 4 | ||||
| TJ 工作虚拟结温 | TJ | -40 | 150 | °C | 4 | ||
| Tstg 贮存温度 | Tstg | -65 | 150 | °C | 4 | ||
| 输入电压范围 VIN(TPS5431) | VIN | 5.5 | 23 | V | 4 | ||
| TJ 工作结温 | TJ | -40 | 125 | °C | 4 | ||
| VIN 静态电流 | IQ(VIN) | 2 | 4.4 | mA | 非开关,VSENSE = 2V,PH 引脚开路 | 5 | |
| VIN 关断电源电流 | ISD(VIN) | 15 | 50 | µA | 关断,ENA = 0V | 5 | |
| VIN UVLO 上升阈值 | VINUVLO(R) | 5.3 | 5.5 | V | VVIN 上升 | 5 | |
| FB 电压 TJ = 25°C | VFB | 1.202 | 1.221 | 1.239 | V | TJ = 25°C | 5 |
| FB 电压 TJ = -40°C 至 125°C | VFB | 1.196 | 1.221 | 1.245 | V | TJ = -40°C 至 125°C | 5 |
| 开关频率 | fSW | 400 | 500 | 600 | kHz | 5 | |
| 最小 ON 脉冲宽度 | tON(min) | 150 | 200 | ns | 5 | ||
| 最大占空比 | DMAX | 87 | 89 | % | fSW = 500kHz | 5 | |
| 内部慢启动时间(0 至 100%) | tSS | 5.4 | 8 | 10 | ms | 5 | |
| 高侧峰值电流限值 | IHS(OC) | 4 | 5 | 6 | A | 5 | |
| 重启之前的断续时间 | 13 | 16 | 20 | ms | 5 | ||
| 高侧 MOSFET 导通电阻(VIN = 12V) | RDSON(HS) | 100 | 230 | mΩ | VIN = 12V,VBOOT-SW = 4.5V | 5 | |
| 热关断阈值 | TJ(SD) | 135 | 162 | °C | 温度上升 | 5 | |
| VIN UVLO 迟滞 | 0.35 | V | 5 | ||||
| 高侧 MOSFET 导通电阻(VIN = 5.5V) | RDSON(HS) | 125 | mΩ | VIN = 5.5V,VBOOT-SW = 4.0V | 5 | ||
| 热关断迟滞 | TJ(HYS) | 14 | °C | 5 | |||
| ENA 电压上升阈值 | VEN(R) | 1.3 | V | 5 | |||
| ENA 电压下降阈值 | VEN(F) | 0.5 | V | 5 | |||
| ENA 电压迟滞 | VEN(H) | 325 | mV | 5 | |||
| RθJA 结至环境热阻 | RθJA | 45 | °C/W | TPS5430EVM | 4 | ||
| RθJA 结至环境热阻 | RθJA | 42.3 | °C/W | JESD 51-7 | 4 | ||
| RθJC(top) 结至外壳(顶部)热阻 | RθJC(top) | 46 | °C/W | 4 | |||
| RθJB 结至电路板热阻 | RθJB | 15 | °C/W | 4 | |||
| ψJT 结至顶部特征参数 | ψJT | 5.2 | °C/W | 5 | |||
| ψJB 结至电路板特征参数 | ψJB | 15.3 | °C/W | 5 | |||
| RθJC(bot) 结至外壳(底部)热阻 | RθJC(bot) | 6 | °C/W | 5 |
CAD (KiCad official)
- Symbol:
TPS5431DDAR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
tps5431ddar-etched.step/tps5431ddar-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps5431ddar.step/tps5431ddar.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (40 pp, sha256
b0f082c6bf7e36a7, retrieved 2026-09-27, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).