component

TPS54318RTET

Public Made by Adom

by adom

Texas Instruments DC-DC Converters, WQFN-16-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentpower management (pmic)tps54318rtetfactory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray 2d ago
viewers tps54318rtet: viewers · Ray 2d ago
package.json tps54318rtet: LCSC part number C882748 (was published as the bare integer) · Ray 1d ago
page.json tps54318rtet: LCSC part number C882748 (was published as the bare integer) · Ray 1d ago
README.md Initial commit: component/tps54318rtet · Ray 2d ago
tps54318rtet-etched.glb tps54318rtet: factory component page (tier=lcsc) · Ray 2d ago
tps54318rtet-etched.step tps54318rtet: factory component page (tier=lcsc) · Ray 2d ago
tps54318rtet-hero.glb Publish 0.1.0 · Ray 2d ago
tps54318rtet-hero.overlay.json Publish 0.1.0 · Ray 2d ago
tps54318rtet.glb Publish 0.1.0 · Ray 2d ago
tps54318rtet.kicad_mod Publish 0.1.0 · Ray 2d ago
tps54318rtet.kicad_sym Publish 0.1.0 · Ray 2d ago
tps54318rtet.lbr Publish 0.1.0 · Ray 2d ago
tps54318rtet.step Publish 0.1.0 · Ray 2d ago

TPS54318RTET

Texas Instruments · DC-DC Converters · WQFN-16-EP(3x3)

TPS54318RTET from Texas Instruments, in a WQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Input supply voltage range is 2.95 V to 6 V.
2 VIN power_in Input supply voltage range is 2.95 V to 6 V.
3 GND power_in Power ground; should be electrically connected directly to the power pad under the device.
4 GND power_in Power ground; should be electrically connected directly to the power pad under the device.
5 AGND power_in Analog ground; should be electrically connected to GND close to the device.
6 VSENSE input Inverting node of the transconductance error amplifier.
7 COMP output Error amplifier output and input to the output switch current comparator; connect frequency compensation components to this pin.
8 RT/CLK bidirectional Resistor timing or external clock input pin.
9 SS bidirectional Slow-start pin; an external capacitor connected to this pin sets the output voltage rise time.
10 PH output Source of the internal high-side power MOSFET and drain of the internal low-side synchronous rectifier MOSFET.
11 PH output Source of the internal high-side power MOSFET and drain of the internal low-side synchronous rectifier MOSFET.
12 PH output Source of the internal high-side power MOSFET and drain of the internal low-side synchronous rectifier MOSFET.
13 BOOT input Bootstrap capacitor input; if voltage is below the minimum required by BOOT UVLO, the output is forced to switch off until the capacitor is refreshed.
14 PWRGD output Open drain power good output; asserts low if output voltage is low due to thermal shutdown, overcurrent, over/under-voltage or EN shutdown.
15 EN input Enable input with internal pull-up current source; pull below 1.2 V to disable or float to enable.
16 VIN power_in Input supply voltage range is 2.95 V to 6 V.
17 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WQFN-16-EP(3x3)
Category Power Management (PMIC)
Pins 17

CAD (KiCad official)

  • Symbol: TPS54318RTET
  • Footprint: Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
  • 3D model: WQFN-16-EP(3x3) (KiCad packages3D, STEP)
  • 3D model files: tps54318rtet-etched.step / tps54318rtet-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps54318rtet.step / tps54318rtet.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (41 pp, sha256 1f9f20765ddc24aa, retrieved 2026-10-06, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF