main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs tps54308ddct: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers tps54308ddct: viewers · Ray
package.json tps54308ddct: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json tps54308ddct: specified limits as data (metadata.characteristics, 43 rows from the datasheet) · Ray
README.md tps54308ddct: specified limits as data (metadata.characteristics, 43 rows from the datasheet) · Ray
tps54308ddct-etched.fit.json tps54308ddct: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps54308ddct-etched.glb tps54308ddct: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps54308ddct-etched.step tps54308ddct: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps54308ddct.glb Publish 0.1.0 · Ray
tps54308ddct.kicad_mod Publish 0.1.0 · Ray
tps54308ddct.kicad_sym Publish 0.1.0 · Ray
tps54308ddct.lbr Publish 0.1.0 · Ray
tps54308ddct.step Publish 0.1.0 · Ray

TPS54308DDCT

Texas Instruments · DC-DC Converters · TSOT-23-6

TPS54308DDCT from Texas Instruments, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground pin for low-side NFET source and control circuit; provides reference for output voltage feedback.
2 SW output Switch node connection between high-side and low-side NFET; rated -5V to 30V at 20ns transient voltage.
3 VIN power_in Input power supply pin rated 4.5V to 28V; drain terminal of high-side power NFET.
4 FB input Converter feedback input connected via external resistor divider to output voltage; internal reference voltage 0.596V nominal.
5 EN input Enable control pin with internal pull-up current; device enables when EN > 1.28V rising threshold, disables when EN < 1.19V falling threshold.
6 BOOT output Bootstrap supply for high-side NFET gate driver circuit; connect 0.1µF ceramic capacitor between BOOT and SW pins for proper operation.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSOT-23-6
Category Power Management (PMIC)
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
输入电压范围 VIN (绝对最大) VIN -0.3 30 V 4
EN 引脚电压 (绝对最大) EN -0.3 7 V 4
FB 引脚电压 (绝对最大) FB -0.3 7 V 4
BOOT-SW 输出电压范围 (绝对最大) BOOT-SW -0.3 7 V 4
SW 输出电压范围 (绝对最大) SW -0.3 30 V 4
SW 瞬态值 (绝对最大) SW -5 30 V 20ns 瞬态值 4
工作结温 TJ (绝对最大) TJ -40 150 °C 4
存储温度范围 (绝对最大) Tstg -65 150 °C 4
VIN 输入电压范围 (推荐运行) VIN 4.5 28 V 4
EN 电压范围 (推荐运行) EN -0.1 7 V 4
FB 电压范围 (推荐运行) FB -0.1 7 V 4
BOOT-SW 电压范围 (推荐运行) BOOT-SW -0.1 7 V 4
SW 电压范围 (推荐运行) SW -0.1 28 V 4
工作结温 TJ (推荐运行) TJ -40 125 °C 4
VIN 输入电压范围 VIN 4.5 28 V 5
VIN 欠压锁定 上升 VIN(UVLO) 3.8 4.1 4.45 V 上升 VIN 5
VIN 欠压锁定 下降 VIN(UVLO) 3.3 3.6 3.9 V 下降 VIN 5
VIN 欠压锁定 迟滞 VIN(UVLO) 400 480 600 mV 迟滞 5
EN 启用阈值 上升 V(EN_RISING) 1.21 1.28 V 上升 5
EN 启用阈值 下降 V(EN_FALLING) 1.1 1.19 V 下降 5
反馈电压 VFB VFB 0.581 0.596 0.611 V VIN = 12V 5
高侧电流限值 I(LIM_HS) 4 5 5.9 A 最大电感器峰值电流 5
低侧拉电流限值 I(LIM_LS) 3.1 4 5.5 A 最大电感器谷值电流 5
低侧灌电流限值 I(LIM_LSSOC) 1.75 2.8 3.85 A 5
中心开关频率 Fsw 255 350 445 kHz 5
非开关静态电流 IQ 300 µA EN =5V,VFB = 1V 5
关断电流 IOFF 2 µA EN = GND 5
EN 输入电流 I(EN_INPUT) 0.7 µA VEN = 1V 5
EN 迟滞电流 I(EN_HYS) 1.55 µA VEN = 1.5V 5
高侧 FET 导通电阻 R(HSD) 85 mΩ TA = 25°C,VBST – SW = 6V 5
低侧 FET 导通电阻 R(LSD) 40 mΩ TA = 25°C,VIN = 12V 5
热关断 温度上升 165 °C 未经生产测试 5
热关断 迟滞 10 °C 5
热关断 断续时间 32768 周期 5
过流断续等待时间 tHIC_WAIT 512 周期 5
重新开始之前的断续时间 tHIC_RESTART 16384 周期 5
软启动时间 tSS 5 ms 5
最短导通时间 tMIN_ON 110 ns 在 90% 至 90% 和 1A 负载下测量 5
结至环境热阻 RθJA 87.1 °C/W 4
结至外壳(顶部)热阻 RθJC(top) 35.5 °C/W 4
结至电路板热阻 RθJB 14.4 °C/W 4
结至顶部特征参数 ψJT 0.9 °C/W 4
结至电路板特征参数 ψJB 14.2 °C/W 4

CAD (KiCad official)

  • Symbol: TPS54308DDCT
  • Footprint: Package_TO_SOT_SMD:TSOT-23-6
  • 3D model: TSOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: tps54308ddct-etched.step / tps54308ddct-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps54308ddct.step / tps54308ddct.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (32 pp, sha256 139fae43bffd248f, retrieved 2026-09-23, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF