← Commit history
page.json+10−7@@ -38,7 +38,7 @@ "number": "1", "name": "BOOT", "type": "passive",- "description": "Bootstrap supply node; connect 0.1 \u03bcF ceramic capacitor between BOOT and PH; integrated boot regulator sources this node; MOSFET disabled if BOOT-PH voltage falls below 2.1 V typical; rated 0-38 V absolute maximum."+ "description": "Bootstrap supply node; connect 0.1 μF ceramic capacitor between BOOT and PH; integrated boot regulator sources this node; MOSFET disabled if BOOT-PH voltage falls below 2.1 V typical; rated 0-38 V absolute maximum." }, { "number": "2",@@ -50,25 +50,25 @@ "number": "3", "name": "EN", "type": "input",- "description": "Enable control input; float to enable converter or pull below 1.25 V threshold to disable; internal pull-up current source (1-3 \u03bcA) available for external UVLO threshold divider programming; rated -0.3 V to 6 V absolute maximum."+ "description": "Enable control input; float to enable converter or pull below 1.25 V threshold to disable; internal pull-up current source (1-3 μA) available for external UVLO threshold divider programming; rated -0.3 V to 6 V absolute maximum." }, { "number": "4", "name": "SS", "type": "passive",- "description": "Slow start network node; external capacitor (1-27 nF recommended) connects to ground and charges from 2 \u03bcA current source to set output voltage rise time from 1 ms to 10 ms; rated -0.3 V to 3 V absolute maximum; 200 \u03bcA sink current specified."+ "description": "Slow start network node; external capacitor (1-27 nF recommended) connects to ground and charges from 2 μA current source to set output voltage rise time from 1 ms to 10 ms; rated -0.3 V to 3 V absolute maximum; 200 μA sink current specified." }, { "number": "5", "name": "VSENSE", "type": "input",- "description": "Inverting input to transconductance error amplifier (92 \u03bcA/V gain, 800 V/V DC gain); connect output voltage divider tap for feedback regulation and closed-loop control; rated -0.3 V to 3 V absolute maximum; 10 \u03bcA sink current specified."+ "description": "Inverting input to transconductance error amplifier (92 μA/V gain, 800 V/V DC gain); connect output voltage divider tap for feedback regulation and closed-loop control; rated -0.3 V to 3 V absolute maximum; 10 μA sink current specified." }, { "number": "6", "name": "COMP", "type": "output",- "description": "Error amplifier output and PWM comparator input; attach frequency compensation network (series R and C to ground) to set loop crossover frequency and phase margin; rated -0.3 V to 3 V absolute maximum; source/sink current \u00b17 \u03bcA at 1 V nominal; maximum clamp limits peak inductor current."+ "description": "Error amplifier output and PWM comparator input; attach frequency compensation network (series R and C to ground) to set loop crossover frequency and phase margin; rated -0.3 V to 3 V absolute maximum; source/sink current ±7 μA at 1 V nominal; maximum clamp limits peak inductor current." }, { "number": "7",@@ -80,7 +80,7 @@ "number": "8", "name": "PH", "type": "output",- "description": "Switching node output of integrated high-side MOSFET (80 m\u03a9 typical on-resistance); voltage swings from 0 V to BOOT-PH voltage level during switching; connect to output inductor and catch diode cathode to complete buck converter power stage; rated -0.6 V to 30 V absolute maximum; source current 6 A specified."+ "description": "Switching node output of integrated high-side MOSFET (80 mΩ typical on-resistance); voltage swings from 0 V to BOOT-PH voltage level during switching; connect to output inductor and catch diode cathode to complete buck converter power stage; rated -0.6 V to 30 V absolute maximum; source current 6 A specified." } ], "provenance": {@@ -158,5 +158,8 @@ "docs/tps54233dr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }