component
TPS54218RTER
Public Made by Adomby adom
Texas Instruments DC-DC Converters, WQFN-16-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+54@@ -0,0 +1,54 @@+# TPS54218RTER++**Texas Instruments** · DC-DC Converters · WQFN-16-EP(3x3)++TPS54218RTER from Texas Instruments, in a WQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VIN | power_in | Input supply voltage, operating range 2.95 V to 6 V. |+| 2 | VIN | power_in | Input supply voltage, operating range 2.95 V to 6 V. |+| 3 | GND | power_in | Power ground; connect directly to the power pad under the device. |+| 4 | GND | power_in | Power ground; connect directly to the power pad under the device. |+| 5 | AGND | power_in | Analog ground; should be electrically connected to GND close to the device. |+| 6 | VSENSE | input | Inverting node of the transconductance error amplifier for output voltage feedback, operates at 0.8 V reference. |+| 7 | COMP | output | Error amplifier output and input to the output switch current comparator; connect frequency compensation components to this pin. |+| 8 | RT/CLK | bidirectional | Resistor timing pin for setting switching frequency 200 kHz to 2000 kHz, or external clock input for synchronization at 300 kHz to 2000 kHz. |+| 9 | SS | bidirectional | Soft-start pin; external capacitor connected to ground sets output voltage rise time with internal charge current 2.07 µA. |+| 10 | PH | output | Switching node; source of the internal high-side power MOSFET and drain of the internal low-side synchronous rectifier MOSFET. |+| 11 | PH | output | Switching node; source of the internal high-side power MOSFET and drain of the internal low-side synchronous rectifier MOSFET. |+| 12 | PH | output | Switching node; source of the internal high-side power MOSFET and drain of the internal low-side synchronous rectifier MOSFET. |+| 13 | BOOT | input | Bootstrap capacitor connection between BOOT and PH pins; provides gate drive voltage for high-side MOSFET, requires 0.1 µF ceramic capacitor minimum. |+| 14 | PWRGD | tri_state | Power good open-drain output; asserts low when output voltage falls below 91% or rises above 107% of nominal reference, typical hysteresis 2%. |+| 15 | EN | input | Enable pin with internal pull-up current source; pull below 1.2 V to disable device, float to enable, threshold range 1.16 V to 1.37 V rising. |+| 16 | VIN | power_in | Input supply voltage, operating range 2.95 V to 6 V. |+| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | WQFN-16-EP(3x3) |+| Category | Power Management ICs |+| Pins | 17 |++## CAD (KiCad official)++- Symbol: `TPS54218RTER`+- Footprint: `Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm`+- 3D model: WQFN-16-EP(3x3) (KiCad packages3D, STEP)+- 3D model files: `tps54218rter-etched.step` / `tps54218rter-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps54218rter.step` / `tps54218rter.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps54218) (43 pp, sha256 `ca4e03e545b03c91`, retrieved 2026-09-23, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps54218rter-datasheet.pdf)
page.jsonadded+198@@ -0,0 +1,198 @@+{+ "slug": "tps54218rter",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments DC-DC Converters, WQFN-16-EP(3x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management ics",+ "tps54218rter",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tps54218rter.kicad_sym",+ "tps54218rter.kicad_mod",+ "tps54218rter.glb",+ "tps54218rter.step",+ "tps54218rter.lbr",+ "docs/hero.png",+ "docs/tps54218rter-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "TPS54218RTER",+ "manufacturer": "Texas Instruments",+ "package": "WQFN-16-EP(3x3)",+ "pin_count": 17,+ "category": "Power Management ICs",+ "subcategory": "DC-DC Converters",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tps54218",+ "parts": {+ "symbol": "tps54218rter.kicad_sym",+ "footprint": "tps54218rter.kicad_mod",+ "model_3d": "tps54218rter-etched.glb",+ "model_3d_plain": "tps54218rter.glb",+ "model_3d_step": "tps54218rter-etched.step",+ "model_3d_step_plain": "tps54218rter.step",+ "lbr": "tps54218rter.lbr"+ },+ "distributor_links": {+ "lcsc": "C160706"+ },+ "pins": [+ {+ "number": "1",+ "name": "VIN",+ "type": "power_in",+ "description": "Input supply voltage, operating range 2.95 V to 6 V."+ },+ {+ "number": "2",+ "name": "VIN",+ "type": "power_in",+ "description": "Input supply voltage, operating range 2.95 V to 6 V."+ },+ {+ "number": "3",+ "name": "GND",+ "type": "power_in",+ "description": "Power ground; connect directly to the power pad under the device."+ },+ {+ "number": "4",+ "name": "GND",+ "type": "power_in",+ "description": "Power ground; connect directly to the power pad under the device."+ },+ {+ "number": "5",+ "name": "AGND",+ "type": "power_in",+ "description": "Analog ground; should be electrically connected to GND close to the device."+ },+ {+ "number": "6",+ "name": "VSENSE",+ "type": "input",+ "description": "Inverting node of the transconductance error amplifier for output voltage feedback, operates at 0.8 V reference."+ },+ {+ "number": "7",+ "name": "COMP",+ "type": "output",+ "description": "Error amplifier output and input to the output switch current comparator; connect frequency compensation components to this pin."+ },+ {+ "number": "8",+ "name": "RT/CLK",+ "type": "bidirectional",+ "description": "Resistor timing pin for setting switching frequency 200 kHz to 2000 kHz, or external clock input for synchronization at 300 kHz to 2000 kHz."+ },+ {+ "number": "9",+ "name": "SS",+ "type": "bidirectional",+ "description": "Soft-start pin; external capacitor connected to ground sets output voltage rise time with internal charge current 2.07 µA."+ },+ {+ "number": "10",+ "name": "PH",+ "type": "output",+ "description": "Switching node; source of the internal high-side power MOSFET and drain of the internal low-side synchronous rectifier MOSFET."+ },+ {+ "number": "11",+ "name": "PH",+ "type": "output",+ "description": "Switching node; source of the internal high-side power MOSFET and drain of the internal low-side synchronous rectifier MOSFET."+ },+ {+ "number": "12",+ "name": "PH",+ "type": "output",+ "description": "Switching node; source of the internal high-side power MOSFET and drain of the internal low-side synchronous rectifier MOSFET."+ },+ {+ "number": "13",+ "name": "BOOT",+ "type": "input",+ "description": "Bootstrap capacitor connection between BOOT and PH pins; provides gate drive voltage for high-side MOSFET, requires 0.1 µF ceramic capacitor minimum."+ },+ {+ "number": "14",+ "name": "PWRGD",+ "type": "tri_state",+ "description": "Power good open-drain output; asserts low when output voltage falls below 91% or rises above 107% of nominal reference, typical hysteresis 2%."+ },+ {+ "number": "15",+ "name": "EN",+ "type": "input",+ "description": "Enable pin with internal pull-up current source; pull below 1.2 V to disable device, float to enable, threshold range 1.16 V to 1.37 V rising."+ },+ {+ "number": "16",+ "name": "VIN",+ "type": "power_in",+ "description": "Input supply voltage, operating range 2.95 V to 6 V."+ },+ {+ "number": "17",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "exposed pad 17 added from the footprint",+ "dropped thermal pad ['EP'] absent from footprint"+ ],+ "pages_sent": 43,+ "cost_usd": 0.4139,+ "at": "2026-09-23T14:36:43"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tps54218",+ "pages": 43,+ "sha256": "ca4e03e545b03c91",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 17,+ "described": 17,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}