TPS54202DDCR

{
 "schema": "adom/mark-plan@1",
 "mpn": "TPS54202DDCR",
 "step": "/home/adom/project/basic-parts-overhaul/pages-extra/tps54202ddcr/tps54202ddcr.step",
 "footprint": "/home/adom/project/basic-parts-overhaul/pages-extra/tps54202ddcr/tps54202ddcr.kicad_mod",
 "standUp": [],
 "standUpSource": "as-is (Z up)",
 "face": "top",
 "pin1": {
  "source": "footprint pad 1",
  "xyMm": [
   -1.1375,
   0.95
  ],
  "corner": "left/lower"
 },
 "existingMarks": [],
 "vendorMarking": {
  "present": false,
  "glyphFaces": 0
 },
 "faceNormal": [
  0,
  0,
  1
 ],
 "longAxis": {
  "axis": "y",
  "vector": [
   0.0,
   1.0,
   0.0
  ],
  "why": "longest usable top dimension (2.17 mm vs 1.37 mm)",
  "override": null
 },
 "readingDirection": {
  "vector": [
   -0.0,
   -1.0,
   0.0
  ],
  "angleDeg": 270,
  "textUp": [
   1.0,
   -0.0,
   0.0
  ],
  "rule": "pin 1 / pad 1 at the start (left) of the text, and below it when it sits on a side"
 },
 "band": {
  "regionMm": [
   -0.6836,
   -1.3336,
   0.6836,
   0.8386
  ],
  "zMm": 1.55,
  "lengthMm": 2.1722,
  "heightMm": 1.3672,
  "why": "highest flat face over the body centre",
  "terminationsExcludedBy": null,
  "trimmedEnds": [],
  "keepouts": [
   [
    -0.4586,
    0.8586,
    -0.2086,
    1.1086
   ]
  ],
  "sideTurn": null,
  "margins": {
   "lengthEachSide": 0.12,
   "heightEachSide": 0.15
  }
 },
 "text": {
  "lines": [
   "TPS54202",
   "DDCR"
  ],
  "chars": 12,
  "capHeightMm": 0.2588,
  "smallestLineMm": 0.2588,
  "heightPctOfBand": 43.5,
  "why": "two lines: the smaller line (0.259 mm) beats one line (0.171 mm) by 1.51x",
  "alternative": {
   "lines": [
    "TPS54202DDCR"
   ],
   "capHeightMm": 0.1709,
   "smallestLineMm": 0.1709
  },
  "font": "service-step2glb /laser-etch (single-stroke outline font)"
 },
 "etch": {
  "poseQuarterTurnsZ": 1,
  "service": "/laser-etch?mode=flat",
  "note": "turn so the reading direction is +X, etch, fit the mark into the band, turn back"
 },
 "outline": {
  "upAxis": "z",
  "poseRotZDeg": 180,
  "rot": 90,
  "recipe": "adom-aiflow-etch outline <part.step> --footprint <part.kicad_mod> --mpn TPS54202DDCR (stands the STEP up (as-is (Z up)), turns it 180 deg about Z and draws TPS54202 / DDCR on the planned band, rot 90)",
  "why": "iso camera looks from +X+Y+Z: text along +Y (rot 90) or -X (rot 180) reads left to right with pin 1 toward the viewer"
 },
 "widget": {
  "px": 320,
  "pxPerMm": 78.33,
  "capHeightPx": 16.6
 },
 "hints": [],
 "warnings": [],
 "summary": "Mark along the 2.17 mm axis (-Y), 0.26 mm text (2 lines), upright with pin 1 left lower, outline rot 90 after a 180 deg pose turn; ~17 px caps at 320 px"
}