component
TPS54140DGQ
Public Made by Adomby adom
Texas Instruments DC-DC Converters, MSOP-10-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 1mo ago |
| viewers | 1mo ago |
| package.json | 1mo ago |
| page.json | 1mo ago |
| README.md | 1mo ago |
| tps54140dgq-etched.glb | 1mo ago |
| tps54140dgq-etched.step | 1mo ago |
| tps54140dgq-hero.glb | 1mo ago |
| tps54140dgq-hero.overlay.json | 1mo ago |
| tps54140dgq.glb | 1mo ago |
| tps54140dgq.kicad_mod | 1mo ago |
| tps54140dgq.kicad_sym | 1mo ago |
| tps54140dgq.lbr | 1mo ago |
| tps54140dgq.step | 1mo ago |
TPS54140DGQ
Texas Instruments · DC-DC Converters · MSOP-10-EP
TPS54140DGQ from Texas Instruments, in a MSOP-10-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BOOT | output | A bootstrap capacitor is required between the BOOT and PH pins; if the voltage on this capacitor falls below the device minimum, the output is forced off until the capacitor is refreshed. |
| 2 | VIN | power_in | Input supply voltage pin, specified for 3.5 V to 42 V operation. |
| 3 | EN | input | Enable pin with internal pullup current source; pull below 1.2 V to disable, float to enable, and use two resistors to set the input undervoltage lockout. |
| 4 | SS/TR | input | Slow-start and tracking pin where an external capacitor sets the output rise time; because its voltage overrides the internal reference, it can be used for tracking and sequencing. |
| 5 | RT/CLK | input | Resistor timing and external clock pin: an external resistor to ground sets the switching frequency, and pulling the pin above the PLL upper threshold makes it a high-impedance synchronization input. |
| 6 | PWRGD | output | Open-drain power-good output that is asserted low when the output is low due to thermal shutdown, dropout, overvoltage, or EN shutdown (sink current limited to 10 mA). |
| 7 | VSENSE | input | Inverting node of the transconductance (gm) error amplifier; absolute maximum rating is -0.3 V to 3 V. |
| 8 | COMP | output | Error amplifier output and input to the output-switch current comparator; frequency compensation components connect to this pin (absolute maximum rating -0.3 V to 3 V). |
| 9 | GND | power_in | Ground pin, which must be electrically connected to the exposed PowerPAD on the printed circuit board for proper operation. |
| 10 | PH | output | Source of the internal high-side power MOSFET; absolute maximum output voltage is -0.6 V to 47 V (-2 V for 10-ns transients). |
| 11 | Thermal Pad | power_in | Exposed PowerPAD that must be electrically connected to the GND pin/PCB ground plane for proper operation; PAD-to-GND voltage difference is limited to ±200 mV. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | MSOP-10-EP |
| Category | Power Management (PMIC) |
| Pins | 11 |
CAD (KiCad official)
- Symbol:
TPS54140DGQ - Footprint:
Package_SO:MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mm - 3D model: MSOP-10-EP (KiCad packages3D, STEP)
- 3D model files:
tps54140dgq-etched.step/tps54140dgq-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps54140dgq.step/tps54140dgq.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (55 pp, sha256
b1aa27b28e4a5124, retrieved 2026-10-08, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).