component
TPS53647RTAT
Public Made by Adomby adom
Texas Instruments AC-DC Controllers & Regulators, QFN-40-EP(6x6). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+78@@ -0,0 +1,78 @@+# TPS53647RTAT++**Texas Instruments** · AC-DC Controllers & Regulators · QFN-40-EP(6x6)++TPS53647RTAT from Texas Instruments, in a QFN-40-EP(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | OCL-R | input | Voltage divider to VREF and GND sets one of 16 per-phase overcurrent limit levels (23-72 A) and one of four ramp levels (40-200 mVp-p); device latches settings when V3R3 powers up. |+| 2 | IMON | output | Analog current monitor output generated from summed individual phase currents; output voltage VIMON = F × VREF × (total current) / (IMAX × 35kΩ). |+| 3 | CSP1 | input | Positive current sense input for phase 1 from TI smart power stage (ex: CSD95372BQ5MC); connect to IOUT pin with 5 mV/A gain. |+| 4 | CSP2 | input | Positive current sense input for phase 2 from TI smart power stage; tie to V3R3 pin to disable phase 2 operation. |+| 5 | CSP3 | input | Positive current sense input for phase 3 from TI smart power stage; tie to V3R3 pin to disable phase 3 operation. |+| 6 | CSP4 | input | Positive current sense input for phase 4 from TI smart power stage; tie to V3R3 pin to disable phase 4 operation. |+| 7 | NC | unconnected | No connection; leave pin open or pull up to V3R3 pin. |+| 8 | NC | unconnected | No connection; leave pin open or pull up to V3R3 pin. |+| 9 | VSP | input | Positive input of remote voltage sense amplifier with typical input bias current of 300 µA; connect directly to load output voltage with differential pair spacing ≤ 10 mil. |+| 10 | VSN | input | Negative input of remote voltage sense amplifier with typical input bias current of -23 µA; connect directly to load ground. |+| 11 | COMP | output | Output of gM error amplifier (gain typically 1000 µS); external resistors and capacitors connected between this pin and VREF set compensation network. |+| 12 | ISUM | output | Summed phase current output; resistor (RISUM) connected between this pin and VREF determines droop load-line (VDROOP = gM(isum) × RISUM × RCS × IOUT / 6). |+| 13 | VREF | power_out | 1.7-V, 500-µA LDO reference voltage output; bypass to GND with 0.33 µF ceramic capacitor and connect to REFIN pin of TI smart power stages. |+| 14 | V3R3 | power_out | 3.3-V LDO output generated from V5 with startup time ~600 µs when V5 exceeds 4.25 V; bypass to GND with 1-4.7 µF ceramic capacitor. |+| 15 | V5 | power_in | 5-V power input for internal analog circuits with UVLO threshold 4.25 V (ok) and 4.05 V (fault) and hysteresis of 0.23 V typical; bypass to GND with 1-4.7 µF ceramic capacitor. |+| 16 | VIN | power_in | Input voltage supply (4.5-17 V range) used for input voltage sensing, on-time control, and input undervoltage lockout (UVLO) with four selectable thresholds from 4.5 V to 10.3 V. |+| 17 | GND | power_in | Ground pin; connect to ground plane with multiple vias for low impedance return path. |+| 18 | VR_RDY | output | Power good open-drain output (36-50 Ω pull-down resistance at 0.31 V) asserted low when output voltage < (VDAC - VDROOP - 207 mV) or during startup; typically pulled up to V3R3 through 3 kΩ resistor. |+| 19 | VR_HOT | output | Thermal flag open-drain output asserted low when sensed temperature exceeds TMAX threshold (110 °C default); typically pulled up to V3R3 through 3 kΩ resistor. |+| 20 | GND | power_in | Ground pin connected to GND (not IC ground); connect to GND return path. |+| 21 | RESET | input | Reset pin with logic low threshold 0.8 V and logic high threshold 1.2 V; if held low > 1000 ns, controller pulls output voltage to VBOOT level with reset delay > 1 µs. |+| 22 | GND | power_in | Ground pin; connect to ground plane. |+| 23 | ENABLE | input | VR enable pin with 1-V I/O level logic (low threshold 0.3 V, high threshold 0.8 V) and 100-ns debounce; controls device on/off operation. |+| 24 | PMB_CLK | input | I2C PMBus clock input supporting 100 kHz and 400 kHz bus speeds; compatible with 3.3-V and 1.8-V logic levels. |+| 25 | PMB_ALERT | bidirectional | I2C PMBus interrupt line with open-drain output (asserts low on faults/warnings); compatible with 3.3-V and 1.8-V logic levels and supports SMBus alert response protocol. |+| 26 | PMB_DIO | bidirectional | I2C PMBus digital I/O data line; compatible with 3.3-V and 1.8-V logic levels for PMBus serial communication. |+| 27 | VR_FAULT | output | VR fault indicator open-drain output asserted low for input overcurrent fault, over-temperature fault (>125 °C), output overvoltage fault (>VDAC + offset), or power stage fault; typically pulled up to V3R3 through 3 kΩ resistor. |+| 28 | ADDR-TRISE | input | Voltage divider to VREF pin; resistor (RADDR-TRISE) sets 3 bits for soft-start rise slew rate (1, 1/2, 1/4, 1/8 rates) and LSB of boot voltage; voltage sets 4 bits of PMBus address (16 possible addresses). |+| 29 | SLEW-MODE | input | Voltage divider to VREF pin; resistor (RSLEW-MODE) sets one of eight output voltage slew rates (0.34-2.74 mV/µs); voltage sets 4-bit operation mode bits including VR12.0/12.5, phase interleaving, dynamic phase shedding, and zero load-line. |+| 30 | O-USR | input | Voltage divider to VREF pin; resistor (RO-USR) selects one of seven overshoot reduction (OSR) thresholds (30-140 mV) or OFF; voltage sets one of seven undershoot reduction (USR) levels (20-140 mV) or OFF. |+| 31 | VBOOT | input | Voltage divider to VREF pin; resistor (RVBOOT) sets 3 bits (B[3:1]) of boot voltage VID; voltage (VVBOOT) sets 4 bits (B[7:4]); together with ADDR-TRISE bit 0 sets 7 of 8 bits of boot voltage. |+| 32 | F-IMAX | input | Voltage divider to VREF pin; resistor (RF-IMAX) sets switching frequency (300 kHz to 1 MHz); voltage (VF-IMAX) sets maximum operating current IMAX (8-bit A/D: IMAX = VF-IMAX / VVREF × 255). |+| 33 | NC | unconnected | No connection; leave pin open or pull up to V3R3 pin. |+| 34 | NC | unconnected | No connection; leave pin open or pull up to V3R3 pin. |+| 35 | PWM4 | output | PWM output signal for phase 4 switching with 3.3-V logic levels; high drives high-side MOSFET on, low drives low-side MOSFET on, tri-state (1.7 V) turns both off. |+| 36 | PWM3 | output | PWM output signal for phase 3 switching with 3.3-V logic levels; high drives high-side MOSFET on, low drives low-side MOSFET on, tri-state (1.7 V) turns both off. |+| 37 | PWM2 | output | PWM output signal for phase 2 switching with 3.3-V logic levels; high drives high-side MOSFET on, low drives low-side MOSFET on, tri-state (1.7 V) turns both off. |+| 38 | PWM1 | output | PWM output signal for phase 1 switching with 3.3-V logic levels; high drives high-side MOSFET on, low drives low-side MOSFET on, tri-state (1.7 V) turns both off. |+| 39 | SKIP-NVM | output | Configuration mode select output and SKIP/FCCM mode signal; resistor ≤20 kΩ selects pinstrap mode, ≥100 kΩ selects NVM mode; can connect to FCCM pin of TI smart power stages for skip/continuous conduction mode operation. |+| 40 | TSEN | input | Temperature sense input for highest temperature of power stages (maximum sensed: 127.9 °C); connects to TAO/FAULT pin of TI smart power stages; over-temperature fault threshold 125 °C default with 15 °C hysteresis. |+| 41 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | QFN-40-EP(6x6) |+| Category | Power Supply Chip |+| Pins | 41 |++## CAD (KiCad official)++- Symbol: `TPS53647RTAT`+- Footprint: `Package_DFN_QFN:QFN-40-1EP_6x6mm_P0.5mm_EP4.6x4.6mm`+- 3D model: QFN-40-EP(6x6) (KiCad packages3D, STEP)+- 3D model files: `tps53647rtat-etched.step` / `tps53647rtat-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps53647rtat.step` / `tps53647rtat.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps53647) (123 pp, sha256 `2a0c7fc1d7dab847`, retrieved 2026-09-22, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps53647rtat-datasheet.pdf)
page.jsonadded+342@@ -0,0 +1,342 @@+{+ "slug": "tps53647rtat",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments AC-DC Controllers & Regulators, QFN-40-EP(6x6). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power supply chip",+ "tps53647rtat",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tps53647rtat.kicad_sym",+ "tps53647rtat.kicad_mod",+ "tps53647rtat.glb",+ "tps53647rtat.step",+ "tps53647rtat.lbr",+ "docs/hero.png",+ "docs/tps53647rtat-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "TPS53647RTAT",+ "manufacturer": "Texas Instruments",+ "package": "QFN-40-EP(6x6)",+ "pin_count": 41,+ "category": "Power Supply Chip",+ "subcategory": "AC-DC Controllers & Regulators",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tps53647",+ "parts": {+ "symbol": "tps53647rtat.kicad_sym",+ "footprint": "tps53647rtat.kicad_mod",+ "model_3d": "tps53647rtat-etched.glb",+ "model_3d_plain": "tps53647rtat.glb",+ "model_3d_step": "tps53647rtat-etched.step",+ "model_3d_step_plain": "tps53647rtat.step",+ "lbr": "tps53647rtat.lbr"+ },+ "distributor_links": {+ "lcsc": "C272127"+ },+ "pins": [+ {+ "number": "1",+ "name": "OCL-R",+ "type": "input",+ "description": "Voltage divider to VREF and GND sets one of 16 per-phase overcurrent limit levels (23-72 A) and one of four ramp levels (40-200 mVp-p); device latches settings when V3R3 powers up."+ },+ {+ "number": "2",+ "name": "IMON",+ "type": "output",+ "description": "Analog current monitor output generated from summed individual phase currents; output voltage VIMON = F × VREF × (total current) / (IMAX × 35kΩ)."+ },+ {+ "number": "3",+ "name": "CSP1",+ "type": "input",+ "description": "Positive current sense input for phase 1 from TI smart power stage (ex: CSD95372BQ5MC); connect to IOUT pin with 5 mV/A gain."+ },+ {+ "number": "4",+ "name": "CSP2",+ "type": "input",+ "description": "Positive current sense input for phase 2 from TI smart power stage; tie to V3R3 pin to disable phase 2 operation."+ },+ {+ "number": "5",+ "name": "CSP3",+ "type": "input",+ "description": "Positive current sense input for phase 3 from TI smart power stage; tie to V3R3 pin to disable phase 3 operation."+ },+ {+ "number": "6",+ "name": "CSP4",+ "type": "input",+ "description": "Positive current sense input for phase 4 from TI smart power stage; tie to V3R3 pin to disable phase 4 operation."+ },+ {+ "number": "7",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection; leave pin open or pull up to V3R3 pin."+ },+ {+ "number": "8",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection; leave pin open or pull up to V3R3 pin."+ },+ {+ "number": "9",+ "name": "VSP",+ "type": "input",+ "description": "Positive input of remote voltage sense amplifier with typical input bias current of 300 µA; connect directly to load output voltage with differential pair spacing ≤ 10 mil."+ },+ {+ "number": "10",+ "name": "VSN",+ "type": "input",+ "description": "Negative input of remote voltage sense amplifier with typical input bias current of -23 µA; connect directly to load ground."+ },+ {+ "number": "11",+ "name": "COMP",+ "type": "output",+ "description": "Output of gM error amplifier (gain typically 1000 µS); external resistors and capacitors connected between this pin and VREF set compensation network."+ },+ {+ "number": "12",+ "name": "ISUM",+ "type": "output",+ "description": "Summed phase current output; resistor (RISUM) connected between this pin and VREF determines droop load-line (VDROOP = gM(isum) × RISUM × RCS × IOUT / 6)."+ },+ {+ "number": "13",+ "name": "VREF",+ "type": "power_out",+ "description": "1.7-V, 500-µA LDO reference voltage output; bypass to GND with 0.33 µF ceramic capacitor and connect to REFIN pin of TI smart power stages."+ },+ {+ "number": "14",+ "name": "V3R3",+ "type": "power_out",+ "description": "3.3-V LDO output generated from V5 with startup time ~600 µs when V5 exceeds 4.25 V; bypass to GND with 1-4.7 µF ceramic capacitor."+ },+ {+ "number": "15",+ "name": "V5",+ "type": "power_in",+ "description": "5-V power input for internal analog circuits with UVLO threshold 4.25 V (ok) and 4.05 V (fault) and hysteresis of 0.23 V typical; bypass to GND with 1-4.7 µF ceramic capacitor."+ },+ {+ "number": "16",+ "name": "VIN",+ "type": "power_in",+ "description": "Input voltage supply (4.5-17 V range) used for input voltage sensing, on-time control, and input undervoltage lockout (UVLO) with four selectable thresholds from 4.5 V to 10.3 V."+ },+ {+ "number": "17",+ "name": "GND",+ "type": "power_in",+ "description": "Ground pin; connect to ground plane with multiple vias for low impedance return path."+ },+ {+ "number": "18",+ "name": "VR_RDY",+ "type": "output",+ "description": "Power good open-drain output (36-50 Ω pull-down resistance at 0.31 V) asserted low when output voltage < (VDAC - VDROOP - 207 mV) or during startup; typically pulled up to V3R3 through 3 kΩ resistor."+ },+ {+ "number": "19",+ "name": "VR_HOT",+ "type": "output",+ "description": "Thermal flag open-drain output asserted low when sensed temperature exceeds TMAX threshold (110 °C default); typically pulled up to V3R3 through 3 kΩ resistor."+ },+ {+ "number": "20",+ "name": "GND",+ "type": "power_in",+ "description": "Ground pin connected to GND (not IC ground); connect to GND return path."+ },+ {+ "number": "21",+ "name": "RESET",+ "type": "input",+ "description": "Reset pin with logic low threshold 0.8 V and logic high threshold 1.2 V; if held low > 1000 ns, controller pulls output voltage to VBOOT level with reset delay > 1 µs."+ },+ {+ "number": "22",+ "name": "GND",+ "type": "power_in",+ "description": "Ground pin; connect to ground plane."+ },+ {+ "number": "23",+ "name": "ENABLE",+ "type": "input",+ "description": "VR enable pin with 1-V I/O level logic (low threshold 0.3 V, high threshold 0.8 V) and 100-ns debounce; controls device on/off operation."+ },+ {+ "number": "24",+ "name": "PMB_CLK",+ "type": "input",+ "description": "I2C PMBus clock input supporting 100 kHz and 400 kHz bus speeds; compatible with 3.3-V and 1.8-V logic levels."+ },+ {+ "number": "25",+ "name": "PMB_ALERT",+ "type": "bidirectional",+ "description": "I2C PMBus interrupt line with open-drain output (asserts low on faults/warnings); compatible with 3.3-V and 1.8-V logic levels and supports SMBus alert response protocol."+ },+ {+ "number": "26",+ "name": "PMB_DIO",+ "type": "bidirectional",+ "description": "I2C PMBus digital I/O data line; compatible with 3.3-V and 1.8-V logic levels for PMBus serial communication."+ },+ {+ "number": "27",+ "name": "VR_FAULT",+ "type": "output",+ "description": "VR fault indicator open-drain output asserted low for input overcurrent fault, over-temperature fault (>125 °C), output overvoltage fault (>VDAC + offset), or power stage fault; typically pulled up to V3R3 through 3 kΩ resistor."+ },+ {+ "number": "28",+ "name": "ADDR-TRISE",+ "type": "input",+ "description": "Voltage divider to VREF pin; resistor (RADDR-TRISE) sets 3 bits for soft-start rise slew rate (1, 1/2, 1/4, 1/8 rates) and LSB of boot voltage; voltage sets 4 bits of PMBus address (16 possible addresses)."+ },+ {+ "number": "29",+ "name": "SLEW-MODE",+ "type": "input",+ "description": "Voltage divider to VREF pin; resistor (RSLEW-MODE) sets one of eight output voltage slew rates (0.34-2.74 mV/µs); voltage sets 4-bit operation mode bits including VR12.0/12.5, phase interleaving, dynamic phase shedding, and zero load-line."+ },+ {+ "number": "30",+ "name": "O-USR",+ "type": "input",+ "description": "Voltage divider to VREF pin; resistor (RO-USR) selects one of seven overshoot reduction (OSR) thresholds (30-140 mV) or OFF; voltage sets one of seven undershoot reduction (USR) levels (20-140 mV) or OFF."+ },+ {+ "number": "31",+ "name": "VBOOT",+ "type": "input",+ "description": "Voltage divider to VREF pin; resistor (RVBOOT) sets 3 bits (B[3:1]) of boot voltage VID; voltage (VVBOOT) sets 4 bits (B[7:4]); together with ADDR-TRISE bit 0 sets 7 of 8 bits of boot voltage."+ },+ {+ "number": "32",+ "name": "F-IMAX",+ "type": "input",+ "description": "Voltage divider to VREF pin; resistor (RF-IMAX) sets switching frequency (300 kHz to 1 MHz); voltage (VF-IMAX) sets maximum operating current IMAX (8-bit A/D: IMAX = VF-IMAX / VVREF × 255)."+ },+ {+ "number": "33",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection; leave pin open or pull up to V3R3 pin."+ },+ {+ "number": "34",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection; leave pin open or pull up to V3R3 pin."+ },+ {+ "number": "35",+ "name": "PWM4",+ "type": "output",+ "description": "PWM output signal for phase 4 switching with 3.3-V logic levels; high drives high-side MOSFET on, low drives low-side MOSFET on, tri-state (1.7 V) turns both off."+ },+ {+ "number": "36",+ "name": "PWM3",+ "type": "output",+ "description": "PWM output signal for phase 3 switching with 3.3-V logic levels; high drives high-side MOSFET on, low drives low-side MOSFET on, tri-state (1.7 V) turns both off."+ },+ {+ "number": "37",+ "name": "PWM2",+ "type": "output",+ "description": "PWM output signal for phase 2 switching with 3.3-V logic levels; high drives high-side MOSFET on, low drives low-side MOSFET on, tri-state (1.7 V) turns both off."+ },+ {+ "number": "38",+ "name": "PWM1",+ "type": "output",+ "description": "PWM output signal for phase 1 switching with 3.3-V logic levels; high drives high-side MOSFET on, low drives low-side MOSFET on, tri-state (1.7 V) turns both off."+ },+ {+ "number": "39",+ "name": "SKIP-NVM",+ "type": "output",+ "description": "Configuration mode select output and SKIP/FCCM mode signal; resistor ≤20 kΩ selects pinstrap mode, ≥100 kΩ selects NVM mode; can connect to FCCM pin of TI smart power stages for skip/continuous conduction mode operation."+ },+ {+ "number": "40",+ "name": "TSEN",+ "type": "input",+ "description": "Temperature sense input for highest temperature of power stages (maximum sensed: 127.9 °C); connects to TAO/FAULT pin of TI smart power stages; over-temperature fault threshold 125 °C default with 15 °C hysteresis."+ },+ {+ "number": "41",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-4-6",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Thermal pad connection not explicitly listed as a numbered pin in QFN-40-EP package, but is mentione",+ "exposed pad 41 added from the footprint"+ ],+ "pages_sent": 123,+ "cost_usd": 1.1006,+ "at": "2026-09-22T14:23:51"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tps53647",+ "pages": 123,+ "sha256": "2a0c7fc1d7dab847",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 41,+ "described": 41,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}