component
TPS53647RTAT
Public Made by Adomby adom
Texas Instruments AC-DC Controllers & Regulators, QFN-40-EP(6x6). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+20−17@@ -44,7 +44,7 @@ "number": "2", "name": "IMON", "type": "output",- "description": "Analog current monitor output generated from summed individual phase currents; output voltage VIMON = F \u00d7 VREF \u00d7 (total current) / (IMAX \u00d7 35k\u03a9)."+ "description": "Analog current monitor output generated from summed individual phase currents; output voltage VIMON = F × VREF × (total current) / (IMAX × 35kΩ)." }, { "number": "3",@@ -86,43 +86,43 @@ "number": "9", "name": "VSP", "type": "input",- "description": "Positive input of remote voltage sense amplifier with typical input bias current of 300 \u00b5A; connect directly to load output voltage with differential pair spacing \u2264 10 mil."+ "description": "Positive input of remote voltage sense amplifier with typical input bias current of 300 µA; connect directly to load output voltage with differential pair spacing ≤ 10 mil." }, { "number": "10", "name": "VSN", "type": "input",- "description": "Negative input of remote voltage sense amplifier with typical input bias current of -23 \u00b5A; connect directly to load ground."+ "description": "Negative input of remote voltage sense amplifier with typical input bias current of -23 µA; connect directly to load ground." }, { "number": "11", "name": "COMP", "type": "output",- "description": "Output of gM error amplifier (gain typically 1000 \u00b5S); external resistors and capacitors connected between this pin and VREF set compensation network."+ "description": "Output of gM error amplifier (gain typically 1000 µS); external resistors and capacitors connected between this pin and VREF set compensation network." }, { "number": "12", "name": "ISUM", "type": "output",- "description": "Summed phase current output; resistor (RISUM) connected between this pin and VREF determines droop load-line (VDROOP = gM(isum) \u00d7 RISUM \u00d7 RCS \u00d7 IOUT / 6)."+ "description": "Summed phase current output; resistor (RISUM) connected between this pin and VREF determines droop load-line (VDROOP = gM(isum) × RISUM × RCS × IOUT / 6)." }, { "number": "13", "name": "VREF", "type": "power_out",- "description": "1.7-V, 500-\u00b5A LDO reference voltage output; bypass to GND with 0.33 \u00b5F ceramic capacitor and connect to REFIN pin of TI smart power stages."+ "description": "1.7-V, 500-µA LDO reference voltage output; bypass to GND with 0.33 µF ceramic capacitor and connect to REFIN pin of TI smart power stages." }, { "number": "14", "name": "V3R3", "type": "power_out",- "description": "3.3-V LDO output generated from V5 with startup time ~600 \u00b5s when V5 exceeds 4.25 V; bypass to GND with 1-4.7 \u00b5F ceramic capacitor."+ "description": "3.3-V LDO output generated from V5 with startup time ~600 µs when V5 exceeds 4.25 V; bypass to GND with 1-4.7 µF ceramic capacitor." }, { "number": "15", "name": "V5", "type": "power_in",- "description": "5-V power input for internal analog circuits with UVLO threshold 4.25 V (ok) and 4.05 V (fault) and hysteresis of 0.23 V typical; bypass to GND with 1-4.7 \u00b5F ceramic capacitor."+ "description": "5-V power input for internal analog circuits with UVLO threshold 4.25 V (ok) and 4.05 V (fault) and hysteresis of 0.23 V typical; bypass to GND with 1-4.7 µF ceramic capacitor." }, { "number": "16",@@ -140,13 +140,13 @@ "number": "18", "name": "VR_RDY", "type": "output",- "description": "Power good open-drain output (36-50 \u03a9 pull-down resistance at 0.31 V) asserted low when output voltage < (VDAC - VDROOP - 207 mV) or during startup; typically pulled up to V3R3 through 3 k\u03a9 resistor."+ "description": "Power good open-drain output (36-50 Ω pull-down resistance at 0.31 V) asserted low when output voltage < (VDAC - VDROOP - 207 mV) or during startup; typically pulled up to V3R3 through 3 kΩ resistor." }, { "number": "19", "name": "VR_HOT", "type": "output",- "description": "Thermal flag open-drain output asserted low when sensed temperature exceeds TMAX threshold (110 \u00b0C default); typically pulled up to V3R3 through 3 k\u03a9 resistor."+ "description": "Thermal flag open-drain output asserted low when sensed temperature exceeds TMAX threshold (110 °C default); typically pulled up to V3R3 through 3 kΩ resistor." }, { "number": "20",@@ -158,7 +158,7 @@ "number": "21", "name": "RESET", "type": "input",- "description": "Reset pin with logic low threshold 0.8 V and logic high threshold 1.2 V; if held low > 1000 ns, controller pulls output voltage to VBOOT level with reset delay > 1 \u00b5s."+ "description": "Reset pin with logic low threshold 0.8 V and logic high threshold 1.2 V; if held low > 1000 ns, controller pulls output voltage to VBOOT level with reset delay > 1 µs." }, { "number": "22",@@ -194,7 +194,7 @@ "number": "27", "name": "VR_FAULT", "type": "output",- "description": "VR fault indicator open-drain output asserted low for input overcurrent fault, over-temperature fault (>125 \u00b0C), output overvoltage fault (>VDAC + offset), or power stage fault; typically pulled up to V3R3 through 3 k\u03a9 resistor."+ "description": "VR fault indicator open-drain output asserted low for input overcurrent fault, over-temperature fault (>125 °C), output overvoltage fault (>VDAC + offset), or power stage fault; typically pulled up to V3R3 through 3 kΩ resistor." }, { "number": "28",@@ -206,7 +206,7 @@ "number": "29", "name": "SLEW-MODE", "type": "input",- "description": "Voltage divider to VREF pin; resistor (RSLEW-MODE) sets one of eight output voltage slew rates (0.34-2.74 mV/\u00b5s); voltage sets 4-bit operation mode bits including VR12.0/12.5, phase interleaving, dynamic phase shedding, and zero load-line."+ "description": "Voltage divider to VREF pin; resistor (RSLEW-MODE) sets one of eight output voltage slew rates (0.34-2.74 mV/µs); voltage sets 4-bit operation mode bits including VR12.0/12.5, phase interleaving, dynamic phase shedding, and zero load-line." }, { "number": "30",@@ -224,7 +224,7 @@ "number": "32", "name": "F-IMAX", "type": "input",- "description": "Voltage divider to VREF pin; resistor (RF-IMAX) sets switching frequency (300 kHz to 1 MHz); voltage (VF-IMAX) sets maximum operating current IMAX (8-bit A/D: IMAX = VF-IMAX / VVREF \u00d7 255)."+ "description": "Voltage divider to VREF pin; resistor (RF-IMAX) sets switching frequency (300 kHz to 1 MHz); voltage (VF-IMAX) sets maximum operating current IMAX (8-bit A/D: IMAX = VF-IMAX / VVREF × 255)." }, { "number": "33",@@ -266,13 +266,13 @@ "number": "39", "name": "SKIP-NVM", "type": "output",- "description": "Configuration mode select output and SKIP/FCCM mode signal; resistor \u226420 k\u03a9 selects pinstrap mode, \u2265100 k\u03a9 selects NVM mode; can connect to FCCM pin of TI smart power stages for skip/continuous conduction mode operation."+ "description": "Configuration mode select output and SKIP/FCCM mode signal; resistor ≤20 kΩ selects pinstrap mode, ≥100 kΩ selects NVM mode; can connect to FCCM pin of TI smart power stages for skip/continuous conduction mode operation." }, { "number": "40", "name": "TSEN", "type": "input",- "description": "Temperature sense input for highest temperature of power stages (maximum sensed: 127.9 \u00b0C); connects to TAO/FAULT pin of TI smart power stages; over-temperature fault threshold 125 \u00b0C default with 15 \u00b0C hysteresis."+ "description": "Temperature sense input for highest temperature of power stages (maximum sensed: 127.9 °C); connects to TAO/FAULT pin of TI smart power stages; over-temperature fault threshold 125 °C default with 15 °C hysteresis." }, { "number": "41",@@ -359,5 +359,8 @@ "docs/tps53647rtat-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }