← Commit history

tps53311rgtr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·a1d0500488 · ·parent 3f6f5bc
2 files changed +87−7
package.json+45−5
@@ -53,13 +53,13 @@         "number": "1",         "name": "EN",         "type": "input",-        "description": "Enable input. Internally pulled up to VDD with a 1.35-M\u03a9 resistor."+        "description": "Enable input. Internally pulled up to VDD with a 1.35-MΩ resistor."       },       {         "number": "2",         "name": "SYNC",         "type": "bidirectional",-        "description": "Synchronization signal for input interleaving. Master SYNC pin sends out 180\u00b0 out-of-phase signal to slave SYNC. SYNC frequency must be within \u00b120% of slave nominal frequency."+        "description": "Synchronization signal for input interleaving. Master SYNC pin sends out 180° out-of-phase signal to slave SYNC. SYNC frequency must be within ±20% of slave nominal frequency."       },       {         "number": "3",@@ -95,7 +95,7 @@         "number": "8",         "name": "PS",         "type": "input",-        "description": "Mode configuration pin (with 10 \u00b5A current): Connecting to ground for Forced CCM slave, pulled high or floating for Forced CCM master, or connect to GND with 24.3 k\u03a9 for DE slave, 57.6 k\u03a9 for HEF mode, 105 k\u03a9 for reserved mode, or 174 k\u03a9 for DE master."+        "description": "Mode configuration pin (with 10 µA current): Connecting to ground for Forced CCM slave, pulled high or floating for Forced CCM master, or connect to GND with 24.3 kΩ for DE slave, 57.6 kΩ for HEF mode, 105 kΩ for reserved mode, or 174 kΩ for DE master."       },       {         "number": "9",@@ -184,6 +184,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "tps53311rgtr.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          3.0,+          3.0,+          0.785+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "3eb81ffac423a66cdcfead8efe56401da171edaf1f2257049aad7b2d3900f6c8",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "tps53311rgtr-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          3.0,+          3.0,+          0.785+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "bd8aeeb63d9de6bdd8684f2b5ca70d599929c69e01ade3c8eb9c6533179d4af4",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -169,7 +169,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "tps53311rgtr.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          3.0,+          3.0,+          0.785+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "3eb81ffac423a66cdcfead8efe56401da171edaf1f2257049aad7b2d3900f6c8",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "tps53311rgtr-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          3.0,+          3.0,+          0.785+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "bd8aeeb63d9de6bdd8684f2b5ca70d599929c69e01ade3c8eb9c6533179d4af4",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -216,4 +256,4 @@   "visibility": {     "public": true   }-}\ No newline at end of file+}