← Commit history

Initial commit: component/tps51219rter

Ray ·e95da9f308 ·
2 files changed +249
README.mdadded+54
@@ -0,0 +1,54 @@+# TPS51219RTER++**Texas Instruments** · DC-DC Converters · QFN-16-EP(3x3)++TPS51219RTER from Texas Instruments, in a QFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VREF | power_in | 2.0-V ±0.8% voltage reference output with 300-µA maximum current capability. |+| 2 | REFIN | input | Output voltage setting input; accepts 0.5-V to 2.0-V for programmable output voltage control. |+| 3 | GSNS | input | Ground sense input for differential feedback; short to GND if remote sensing not used. |+| 4 | VSNS | input | Voltage sense input for differential output voltage feedback at load point. |+| 5 | COMP | input | Compensation network connection for integrator feedback in control loop. |+| 6 | TRIP | input | Current sensing threshold configuration input with 10-µA source current and 4700-ppm/°C temperature coefficient. |+| 7 | GND | power_in | Analog ground reference; connect to quiet point on system ground plane. |+| 8 | PGND | power_in | Power ground return for low-side gate driver; connect as close as possible to device. |+| 9 | V5 | power_in | 5V power supply for internal circuits and gate drivers; operating range 4.5-V to 5.5-V. |+| 10 | DL | output | Low-side MOSFET gate driver output with source resistance 0.9-2.0 Ω and sink resistance 0.5-1.2 Ω. |+| 11 | DH | output | High-side MOSFET gate driver output with source resistance 1.6-3.0 Ω and sink resistance 0.6-1.5 Ω. |+| 12 | SW | bidirectional | Switching node return and RDS(on) current sense (-) input; voltage range -5V to 30V. |+| 13 | BST | power_in | Bootstrap voltage input for high-side gate driver; absolute maximum -0.3V to 36V. |+| 14 | EN | input | Enable control input with 100-ns debounce; VIH 1.8V, VIL 0.5V, hysteresis 0.25V. |+| 15 | MODE | input | Mode and frequency selection via resistor-to-GND divider with 16.7-µA source current. |+| 16 | PGOOD | tri_state | Open-drain power-good comparator output; indicates when output voltage within ±8% (typ) of target. |+| 17 | Thermal Pad | passive | Thermal pad for heat dissipation; connect directly to system ground plane with multiple vias. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | QFN-16-EP(3x3) |+| Category | Power Management (PMIC) |+| Pins | 17 |++## CAD (KiCad official)++- Symbol: `TPS51219RTER`+- Footprint: `Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm`+- 3D model: QFN-16-EP(3x3) (KiCad packages3D, STEP)+- 3D model files: `tps51219rter-etched.step` / `tps51219rter-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps51219rter.step` / `tps51219rter.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps51219) (36 pp, sha256 `d6e730c2602800ae`, retrieved 2026-09-23, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps51219rter-datasheet.pdf)
page.jsonadded+195
@@ -0,0 +1,195 @@+{+  "slug": "tps51219rter",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments DC-DC Converters, QFN-16-EP(3x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "tps51219rter",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "tps51219rter.kicad_sym",+    "tps51219rter.kicad_mod",+    "tps51219rter.glb",+    "tps51219rter.step",+    "tps51219rter.lbr",+    "docs/hero.png",+    "docs/tps51219rter-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "TPS51219RTER",+    "manufacturer": "Texas Instruments",+    "package": "QFN-16-EP(3x3)",+    "pin_count": 17,+    "category": "Power Management (PMIC)",+    "subcategory": "DC-DC Converters",+    "datasheet": "https://www.ti.com/cn/lit/gpn/tps51219",+    "parts": {+      "symbol": "tps51219rter.kicad_sym",+      "footprint": "tps51219rter.kicad_mod",+      "model_3d": "tps51219rter-etched.glb",+      "model_3d_plain": "tps51219rter.glb",+      "model_3d_step": "tps51219rter-etched.step",+      "model_3d_step_plain": "tps51219rter.step",+      "lbr": "tps51219rter.lbr"+    },+    "distributor_links": {+      "lcsc": "C411815"+    },+    "pins": [+      {+        "number": "1",+        "name": "VREF",+        "type": "power_in",+        "description": "2.0-V ±0.8% voltage reference output with 300-µA maximum current capability."+      },+      {+        "number": "2",+        "name": "REFIN",+        "type": "input",+        "description": "Output voltage setting input; accepts 0.5-V to 2.0-V for programmable output voltage control."+      },+      {+        "number": "3",+        "name": "GSNS",+        "type": "input",+        "description": "Ground sense input for differential feedback; short to GND if remote sensing not used."+      },+      {+        "number": "4",+        "name": "VSNS",+        "type": "input",+        "description": "Voltage sense input for differential output voltage feedback at load point."+      },+      {+        "number": "5",+        "name": "COMP",+        "type": "input",+        "description": "Compensation network connection for integrator feedback in control loop."+      },+      {+        "number": "6",+        "name": "TRIP",+        "type": "input",+        "description": "Current sensing threshold configuration input with 10-µA source current and 4700-ppm/°C temperature coefficient."+      },+      {+        "number": "7",+        "name": "GND",+        "type": "power_in",+        "description": "Analog ground reference; connect to quiet point on system ground plane."+      },+      {+        "number": "8",+        "name": "PGND",+        "type": "power_in",+        "description": "Power ground return for low-side gate driver; connect as close as possible to device."+      },+      {+        "number": "9",+        "name": "V5",+        "type": "power_in",+        "description": "5V power supply for internal circuits and gate drivers; operating range 4.5-V to 5.5-V."+      },+      {+        "number": "10",+        "name": "DL",+        "type": "output",+        "description": "Low-side MOSFET gate driver output with source resistance 0.9-2.0 Ω and sink resistance 0.5-1.2 Ω."+      },+      {+        "number": "11",+        "name": "DH",+        "type": "output",+        "description": "High-side MOSFET gate driver output with source resistance 1.6-3.0 Ω and sink resistance 0.6-1.5 Ω."+      },+      {+        "number": "12",+        "name": "SW",+        "type": "bidirectional",+        "description": "Switching node return and RDS(on) current sense (-) input; voltage range -5V to 30V."+      },+      {+        "number": "13",+        "name": "BST",+        "type": "power_in",+        "description": "Bootstrap voltage input for high-side gate driver; absolute maximum -0.3V to 36V."+      },+      {+        "number": "14",+        "name": "EN",+        "type": "input",+        "description": "Enable control input with 100-ns debounce; VIH 1.8V, VIL 0.5V, hysteresis 0.25V."+      },+      {+        "number": "15",+        "name": "MODE",+        "type": "input",+        "description": "Mode and frequency selection via resistor-to-GND divider with 16.7-µA source current."+      },+      {+        "number": "16",+        "name": "PGOOD",+        "type": "tri_state",+        "description": "Open-drain power-good comparator output; indicates when output voltage within ±8% (typ) of target."+      },+      {+        "number": "17",+        "name": "Thermal Pad",+        "type": "passive",+        "description": "Thermal pad for heat dissipation; connect directly to system ground plane with multiple vias."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 36,+        "cost_usd": 0.3828,+        "at": "2026-09-23T18:06:14"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/tps51219",+        "pages": 36,+        "sha256": "d6e730c2602800ae",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 17,+        "described": 17,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file