← Commit history
README.mdadded+62@@ -0,0 +1,62 @@+# TPS51116RGER++**Texas Instruments** · DC-DC Converters · VQFN-24-EP(4x4)++TPS51116RGER from Texas Instruments, in a VQFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VTTGND | power_in | Power return for VTT LDO output. |+| 2 | VTTSNS | input | VTT output voltage sense input connected to positive node of output capacitor. |+| 3 | GND | power_in | Signal ground for VTT reference circuits. |+| 4 | MODE | input | Discharge mode selection pin; V5IN for no discharge, VDDQ for tracking, GND for non-tracking. |+| 5 | VTTREF | output | Buffered reference output providing VVDDQSNS/2 ±20mV at ±10mA output current. |+| 6 | COMP | bidirectional | Transconductance amplifier output for current mode compensation or D-CAP mode feedback. |+| 7 | NC | unconnected | No connection; pin not used internally. |+| 8 | VDDQSNS | bidirectional | VDDQ reference and feedback input for VTT LDO and VTTREF generation. |+| 9 | VDDQSET | input | VDDQ output voltage setting; GND for 2.5V, V5FILT for 1.8V, external divider for 0.75-3.0V. |+| 10 | S3 | input | S3 sleep mode input; LOW puts VTT in high-Z, HIGH enables normal operation. |+| 11 | S5 | input | S5 sleep mode input; LOW in S4/S5 states triggers discharge of all outputs. |+| 12 | NC | unconnected | No connection; pin not used internally. |+| 13 | PGOOD | output | Powergood open-drain output; HIGH when VDDQ is 95%-105% of target voltage. |+| 14 | V5FILT | power_in | Filtered 5V supply input for internal circuits; bypass with 1.0-4.7μF ceramic capacitor. |+| 15 | V5IN | power_in | 5V supply input for internal circuits and gate drivers; bypass with 1.0-4.7μF capacitor. |+| 16 | CS | bidirectional | Current sense comparator input for resistor-sense or RDS(on)-sense schemes. |+| 17 | CS_GND | power_in | Current sense comparator ground and powergood circuit return path. |+| 18 | PGND | power_in | Power ground for low-side gate driver; use ≥0.65mm trace width. |+| 19 | DRVL | output | Low-side MOSFET gate driver output with 3Ω source and 0.9Ω sink impedance. |+| 20 | LL | bidirectional | High-side gate driver return and RDS(on) current sense input node. |+| 21 | DRVH | output | High-side MOSFET gate driver output with 3Ω source and 0.9Ω sink impedance. |+| 22 | VBST | bidirectional | Bootstrap supply input for high-side driver; voltage range -0.1V to 34V. |+| 23 | VLDOIN | power_in | VTT LDO supply input; 1.5V to 3.6V for reduced dissipation or tied to VDDQ. |+| 24 | VTT | power_out | VTT LDO output providing ±3A source/sink with ±40mV regulation to 20μF ceramic. |+| 25 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VQFN-24-EP(4x4) |+| Category | Power Management (PMIC) |+| Pins | 25 |++## CAD (KiCad official)++- Symbol: `TPS51116RGER`+- Footprint: `Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm`+- 3D model: VQFN-24-EP(4x4) (KiCad packages3D, STEP)+- 3D model files: `tps51116rger-etched.step` / `tps51116rger-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps51116rger.step` / `tps51116rger.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps51116) (51 pp, sha256 `f9e2fd18700b05c2`, retrieved 2026-09-24, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps51116rger-datasheet.pdf)
page.jsonadded+245@@ -0,0 +1,245 @@+{+ "slug": "tps51116rger",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments DC-DC Converters, VQFN-24-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "tps51116rger",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tps51116rger.kicad_sym",+ "tps51116rger.kicad_mod",+ "tps51116rger.glb",+ "tps51116rger.step",+ "tps51116rger.lbr",+ "docs/hero.png",+ "docs/tps51116rger-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "TPS51116RGER",+ "manufacturer": "Texas Instruments",+ "package": "VQFN-24-EP(4x4)",+ "pin_count": 25,+ "category": "Power Management (PMIC)",+ "subcategory": "DC-DC Converters",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tps51116",+ "parts": {+ "symbol": "tps51116rger.kicad_sym",+ "footprint": "tps51116rger.kicad_mod",+ "model_3d": "tps51116rger-etched.glb",+ "model_3d_plain": "tps51116rger.glb",+ "model_3d_step": "tps51116rger-etched.step",+ "model_3d_step_plain": "tps51116rger.step",+ "lbr": "tps51116rger.lbr"+ },+ "distributor_links": {+ "lcsc": "C116080"+ },+ "pins": [+ {+ "number": "1",+ "name": "VTTGND",+ "type": "power_in",+ "description": "Power return for VTT LDO output."+ },+ {+ "number": "2",+ "name": "VTTSNS",+ "type": "input",+ "description": "VTT output voltage sense input connected to positive node of output capacitor."+ },+ {+ "number": "3",+ "name": "GND",+ "type": "power_in",+ "description": "Signal ground for VTT reference circuits."+ },+ {+ "number": "4",+ "name": "MODE",+ "type": "input",+ "description": "Discharge mode selection pin; V5IN for no discharge, VDDQ for tracking, GND for non-tracking."+ },+ {+ "number": "5",+ "name": "VTTREF",+ "type": "output",+ "description": "Buffered reference output providing VVDDQSNS/2 ±20mV at ±10mA output current."+ },+ {+ "number": "6",+ "name": "COMP",+ "type": "bidirectional",+ "description": "Transconductance amplifier output for current mode compensation or D-CAP mode feedback."+ },+ {+ "number": "7",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection; pin not used internally."+ },+ {+ "number": "8",+ "name": "VDDQSNS",+ "type": "bidirectional",+ "description": "VDDQ reference and feedback input for VTT LDO and VTTREF generation."+ },+ {+ "number": "9",+ "name": "VDDQSET",+ "type": "input",+ "description": "VDDQ output voltage setting; GND for 2.5V, V5FILT for 1.8V, external divider for 0.75-3.0V."+ },+ {+ "number": "10",+ "name": "S3",+ "type": "input",+ "description": "S3 sleep mode input; LOW puts VTT in high-Z, HIGH enables normal operation."+ },+ {+ "number": "11",+ "name": "S5",+ "type": "input",+ "description": "S5 sleep mode input; LOW in S4/S5 states triggers discharge of all outputs."+ },+ {+ "number": "12",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection; pin not used internally."+ },+ {+ "number": "13",+ "name": "PGOOD",+ "type": "output",+ "description": "Powergood open-drain output; HIGH when VDDQ is 95%-105% of target voltage."+ },+ {+ "number": "14",+ "name": "V5FILT",+ "type": "power_in",+ "description": "Filtered 5V supply input for internal circuits; bypass with 1.0-4.7μF ceramic capacitor."+ },+ {+ "number": "15",+ "name": "V5IN",+ "type": "power_in",+ "description": "5V supply input for internal circuits and gate drivers; bypass with 1.0-4.7μF capacitor."+ },+ {+ "number": "16",+ "name": "CS",+ "type": "bidirectional",+ "description": "Current sense comparator input for resistor-sense or RDS(on)-sense schemes."+ },+ {+ "number": "17",+ "name": "CS_GND",+ "type": "power_in",+ "description": "Current sense comparator ground and powergood circuit return path."+ },+ {+ "number": "18",+ "name": "PGND",+ "type": "power_in",+ "description": "Power ground for low-side gate driver; use ≥0.65mm trace width."+ },+ {+ "number": "19",+ "name": "DRVL",+ "type": "output",+ "description": "Low-side MOSFET gate driver output with 3Ω source and 0.9Ω sink impedance."+ },+ {+ "number": "20",+ "name": "LL",+ "type": "bidirectional",+ "description": "High-side gate driver return and RDS(on) current sense input node."+ },+ {+ "number": "21",+ "name": "DRVH",+ "type": "output",+ "description": "High-side MOSFET gate driver output with 3Ω source and 0.9Ω sink impedance."+ },+ {+ "number": "22",+ "name": "VBST",+ "type": "bidirectional",+ "description": "Bootstrap supply input for high-side driver; voltage range -0.1V to 34V."+ },+ {+ "number": "23",+ "name": "VLDOIN",+ "type": "power_in",+ "description": "VTT LDO supply input; 1.5V to 3.6V for reduced dissipation or tied to VDDQ."+ },+ {+ "number": "24",+ "name": "VTT",+ "type": "power_out",+ "description": "VTT LDO output providing ±3A source/sink with ±40mV regulation to 20μF ceramic."+ },+ {+ "number": "25",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "exposed pad 25 added from the footprint"+ ],+ "pages_sent": 51,+ "cost_usd": 0.4944,+ "at": "2026-09-24T03:01:42"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tps51116",+ "pages": 51,+ "sha256": "f9e2fd18700b05c2",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 25,+ "described": 25,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}