← Commit history
README.mdadded+48@@ -0,0 +1,48 @@+# TPS40211DGQR++**Texas Instruments** · DC-DC Converters · MSOP-10-EP++TPS40211DGQR from Texas Instruments, in a MSOP-10-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | RC | input | Oscillator frequency setting pin; connect resistor between RC and VDD and capacitor between RC and GND to set switching frequency. |+| 2 | SS | input | Soft start timing pin; connect capacitor to GND to program soft start ramp time and overcurrent retry timeout duration. |+| 3 | DIS/EN | input | Disable/enable pin with internal 1 MΩ pull-down to GND; pulling above 1.2 V typical disables device and BP regulator; below 1.05 V typical enables device. |+| 4 | COMP | output | Error amplifier output; connect loop compensation network between COMP and FB pins for control loop response. |+| 5 | FB | input | Error amplifier inverting input; connect voltage divider from output to this pin to set output voltage; compensation network between FB and COMP pins. |+| 6 | GND | power_in | Device ground reference. |+| 7 | ISNS | input | Current sense input; connect external sense resistor between this pin and GND; overcurrent protection triggers when voltage exceeds 150 mV typical. |+| 8 | GDRV | output | Gate drive output for N-channel power MOSFET; provides up to 400 mA source and sink current capability. |+| 9 | BP | power_out | Linear regulator output pin; 8 V nominal with 7 V to 9 V operating range; bypass with 1.0 μF capacitor to GND. |+| 10 | VDD | power_in | Input power supply voltage; accepts 4.5 V to 52 V; bypass capacitor to GND required; can connect to converter output for slope compensation. |+| 11 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | MSOP-10-EP |+| Category | Power Management (PMIC) |+| Pins | 11 |++## CAD (KiCad official)++- Symbol: `TPS40211DGQR`+- Footprint: `Package_SO:MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mm`+- 3D model: MSOP-10-EP (KiCad packages3D, STEP)+- 3D model files: `tps40211dgqr-etched.step` / `tps40211dgqr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps40211dgqr.step` / `tps40211dgqr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps40211) (50 pp, sha256 `7213a870ac0ef0d9`, retrieved 2026-09-23, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps40211dgqr-datasheet.pdf)
page.jsonadded+161@@ -0,0 +1,161 @@+{+ "slug": "tps40211dgqr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments DC-DC Converters, MSOP-10-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "tps40211dgqr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tps40211dgqr.kicad_sym",+ "tps40211dgqr.kicad_mod",+ "tps40211dgqr.glb",+ "tps40211dgqr.step",+ "tps40211dgqr.lbr",+ "docs/hero.png",+ "docs/tps40211dgqr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "TPS40211DGQR",+ "manufacturer": "Texas Instruments",+ "package": "MSOP-10-EP",+ "pin_count": 11,+ "category": "Power Management (PMIC)",+ "subcategory": "DC-DC Converters",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tps40211",+ "parts": {+ "symbol": "tps40211dgqr.kicad_sym",+ "footprint": "tps40211dgqr.kicad_mod",+ "model_3d": "tps40211dgqr-etched.glb",+ "model_3d_plain": "tps40211dgqr.glb",+ "model_3d_step": "tps40211dgqr-etched.step",+ "model_3d_step_plain": "tps40211dgqr.step",+ "lbr": "tps40211dgqr.lbr"+ },+ "distributor_links": {+ "lcsc": "C473356"+ },+ "pins": [+ {+ "number": "1",+ "name": "RC",+ "type": "input",+ "description": "Oscillator frequency setting pin; connect resistor between RC and VDD and capacitor between RC and GND to set switching frequency."+ },+ {+ "number": "2",+ "name": "SS",+ "type": "input",+ "description": "Soft start timing pin; connect capacitor to GND to program soft start ramp time and overcurrent retry timeout duration."+ },+ {+ "number": "3",+ "name": "DIS/EN",+ "type": "input",+ "description": "Disable/enable pin with internal 1 MΩ pull-down to GND; pulling above 1.2 V typical disables device and BP regulator; below 1.05 V typical enables device."+ },+ {+ "number": "4",+ "name": "COMP",+ "type": "output",+ "description": "Error amplifier output; connect loop compensation network between COMP and FB pins for control loop response."+ },+ {+ "number": "5",+ "name": "FB",+ "type": "input",+ "description": "Error amplifier inverting input; connect voltage divider from output to this pin to set output voltage; compensation network between FB and COMP pins."+ },+ {+ "number": "6",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground reference."+ },+ {+ "number": "7",+ "name": "ISNS",+ "type": "input",+ "description": "Current sense input; connect external sense resistor between this pin and GND; overcurrent protection triggers when voltage exceeds 150 mV typical."+ },+ {+ "number": "8",+ "name": "GDRV",+ "type": "output",+ "description": "Gate drive output for N-channel power MOSFET; provides up to 400 mA source and sink current capability."+ },+ {+ "number": "9",+ "name": "BP",+ "type": "power_out",+ "description": "Linear regulator output pin; 8 V nominal with 7 V to 9 V operating range; bypass with 1.0 μF capacitor to GND."+ },+ {+ "number": "10",+ "name": "VDD",+ "type": "power_in",+ "description": "Input power supply voltage; accepts 4.5 V to 52 V; bypass capacitor to GND required; can connect to converter output for slope compensation."+ },+ {+ "number": "11",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "exposed pad 11 added from the footprint"+ ],+ "pages_sent": 50,+ "cost_usd": 0.5779,+ "at": "2026-09-23T22:44:09"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tps40211",+ "pages": 50,+ "sha256": "7213a870ac0ef0d9",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 11,+ "described": 11,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}