TPS40210DGQR

{
  "slug": "tps40210dgqr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments DC-DC Converters, HVSSOP-10. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "tps40210dgqr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps40210dgqr.kicad_sym",
    "tps40210dgqr.kicad_mod",
    "tps40210dgqr.glb",
    "tps40210dgqr.step",
    "tps40210dgqr.lbr",
    "docs/hero.png",
    "docs/tps40210dgqr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "component": {
    "mpn": "TPS40210DGQR",
    "manufacturer": "Texas Instruments",
    "package": "HVSSOP-10",
    "pin_count": 11,
    "category": "Power Management (PMIC)",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tps40210",
    "parts": {
      "symbol": "tps40210dgqr.kicad_sym",
      "footprint": "tps40210dgqr.kicad_mod",
      "model_3d": "tps40210dgqr-etched.glb",
      "model_3d_plain": "tps40210dgqr.glb",
      "model_3d_step": "tps40210dgqr-etched.step",
      "model_3d_step_plain": "tps40210dgqr.step",
      "lbr": "tps40210dgqr.lbr"
    },
    "distributor_links": {
      "lcsc": "C14728",
      "digikey": "296-26969-2-ND",
      "mouser": "595-TPS40210DGQR"
    },
    "distributor_check": {
      "checked_at": "2026-10-01T17:13:42Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-26969-2-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-TPS40210DGQR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "RC",
        "type": "input",
        "description": "Oscillator timing pin; connect resistor to VDD and capacitor to GND to set switching frequency between 35 kHz and 1000 kHz."
      },
      {
        "number": "2",
        "name": "SS",
        "type": "input",
        "description": "Soft start programming pin; connect external capacitor to GND to configure soft start time with charge resistance 320-600 k\u03a9 and discharge resistance 840-1600 k\u03a9."
      },
      {
        "number": "3",
        "name": "DIS/EN",
        "type": "input",
        "description": "Disable/enable pin with internal 1 M\u03a9 pull-down to GND; device enters shutdown mode when pulled above 1.3 V; enabled when below 0.7 V."
      },
      {
        "number": "4",
        "name": "COMP",
        "type": "output",
        "description": "Error amplifier output for loop compensation; capable of sourcing 100-250 \u03bcA or sinking 1.2-2.5 mA; connect compensation network between COMP and FB."
      },
      {
        "number": "5",
        "name": "FB",
        "type": "input",
        "description": "Error amplifier inverting input; connect output voltage divider to this pin to set output voltage; compensation network connects between FB and COMP."
      },
      {
        "number": "6",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground reference."
      },
      {
        "number": "7",
        "name": "ISNS",
        "type": "input",
        "description": "Current sense input; connect current sense resistor between ISNS and GND; overcurrent detected at threshold voltage 120-180 mV (150 mV typical)."
      },
      {
        "number": "8",
        "name": "GDRV",
        "type": "output",
        "description": "Gate drive output for N-channel power MOSFET; source current 375-400 mA and sink current 330-400 mA at 4 V."
      },
      {
        "number": "9",
        "name": "BP",
        "type": "output",
        "description": "Internal regulator output voltage 7-9 V at 0-15 mA load; connect 1.0 \u03bcF bypass capacitor between BP and GND."
      },
      {
        "number": "10",
        "name": "VDD",
        "type": "power_in",
        "description": "System input power supply 4.5 V to 52 V; place bypass capacitor near this pin connected to GND; can be connected to converter output for slope compensation."
      },
      {
        "number": "11",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 50,
        "cost_usd": 0.3411,
        "at": "2026-10-01T17:13:22"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tps40210",
        "pages": 50,
        "sha256": "7213a870ac0ef0d9",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 11,
        "described": 11,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    }
  }
}