TPS40200DRBT

{
  "slug": "tps40200drbt",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments DC-DC Converters, HVSON-8-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "tps40200drbt",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps40200drbt.kicad_sym",
    "tps40200drbt.kicad_mod",
    "tps40200drbt.glb",
    "tps40200drbt.step",
    "tps40200drbt.lbr",
    "docs/hero.png",
    "docs/tps40200drbt-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tps40200drbt-hero.glb",
    "tps40200drbt-hero.overlay.json"
  ],
  "component": {
    "mpn": "TPS40200DRBT",
    "manufacturer": "Texas Instruments",
    "package": "HVSON-8-EP(3x3)",
    "pin_count": 9,
    "category": "Power Management (PMIC)",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tps40200",
    "parts": {
      "symbol": "tps40200drbt.kicad_sym",
      "footprint": "tps40200drbt.kicad_mod",
      "model_3d": "tps40200drbt-hero.glb",
      "model_3d_plain": "tps40200drbt.glb",
      "model_3d_step": "tps40200drbt-etched.step",
      "model_3d_step_plain": "tps40200drbt.step",
      "lbr": "tps40200drbt.lbr"
    },
    "distributor_links": {
      "lcsc": "C1848482",
      "digikey": "296-TPS40200DRBTTR-ND",
      "mouser": "595-TPS40200DRBT"
    },
    "distributor_check": {
      "checked_at": "2026-10-08T18:32:59Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-TPS40200DRBTTR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-TPS40200DRBT",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "RC",
        "type": "input",
        "description": "Switching frequency setting RC network: connect a capacitor from RC to GND and a resistor from VDD to RC, and the pin may be synchronized by an external open-drain clock pulled to GND; absolute maximum range is -0.3 V to 5.5 V."
      },
      {
        "number": "2",
        "name": "SS",
        "type": "input",
        "description": "Soft-start programming pin: a capacitor from SS to GND sets the soft-start time, pulling it below 150 mV stops output switching (shutdown), and it also serves as the overcurrent restart timer; absolute maximum range is -0.3 V to 9.0 V."
      },
      {
        "number": "3",
        "name": "COMP",
        "type": "output",
        "description": "Error amplifier output: connect the control-loop compensation network from COMP to FB; absolute maximum range is -0.3 V to 9.0 V."
      },
      {
        "number": "4",
        "name": "FB",
        "type": "input",
        "description": "Error amplifier inverting input: connect the feedback resistor network center tap to this pin; absolute maximum range is -0.3 V to 5.5 V."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground."
      },
      {
        "number": "6",
        "name": "GDRV",
        "type": "output",
        "description": "Driver output for an external P-channel MOSFET, with the absolute maximum range stated as VIN - 10 V to VIN."
      },
      {
        "number": "7",
        "name": "ISNS",
        "type": "input",
        "description": "Current-sense comparator input: connect a current sense resistor between ISNS and VDD to set the desired overcurrent threshold; absolute maximum range is -0.3 V to 52 V."
      },
      {
        "number": "8",
        "name": "VDD",
        "type": "power_in",
        "description": "System input voltage (4.5 V to 52 V recommended operating range): connect a local bypass capacitor from VDD to GND."
      },
      {
        "number": "9",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Package naming mismatch: the package hint says HVSON-8-EP(3x3), but the datasheet names this package; The exposed thermal pad of the DRB package is not given a pin number anywhere in the provided text, ; The datasheet classifies VDD as I (input). It was mapped to KiCad power_in because it is the system ",
          "exposed pad 9 added from the footprint"
        ],
        "pages_sent": 7,
        "cost_usd": 0.0526,
        "at": "2026-10-08T18:32:23"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tps40200",
        "pages": 52,
        "sha256": "a3e23ec7367038ec",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 9,
        "described": 9,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps40200drbt.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.02,
          3.0,
          0.9
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "6a49d67247c513db20d14c427f0863edf58a1b454718a0755803b1de710e8bcc",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps40200drbt-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.02,
          3.0,
          0.9
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "99d30c237c9fbb59838504c19c7152f2cc62e9d1d495010d3d333d4cde46e98a",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}