← Commit history

Initial commit: component/tps40200d

Ray ·e833dd526c ·
2 files changed +202
README.mdadded+44
@@ -0,0 +1,44 @@+# TPS40200D++**Texas Instruments** · DC-DC Converters · SOIC-8++TPS40200D from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | RC | input | Oscillator timing pin; connect resistor from VDD (≤750 μA maximum pull-down current) and capacitor to GND to set switching frequency over the 35-500 kHz range; can be synchronised by pulling below 150 mV for ≥20 ns via open-drain output; absolute maximum −0.3 V to 5.5 V. |+| 2 | SS | input | Soft-start programming pin; connect capacitor from SS to GND; internal pull-up resistance 65-170 kΩ; switching disabled when pulled below 150 mV (VSSRST reset threshold 100-200 mV); also serves as restart timer during hiccup overcurrent recovery; absolute maximum −0.3 V to 9.0 V. |+| 3 | COMP | output | Error amplifier output; connect control-loop Type-II compensation network between COMP and FB; source current 100-250 μA (VFB = 0.6 V, VCOMP = 1 V), sink current 1.0-2.5 mA (VFB = 1.2 V, VCOMP = 1 V); open-loop gain ≥60 dB, gain-bandwidth product 1.5-3 MHz; absolute maximum −0.3 V to 9.0 V. |+| 4 | FB | input | Error amplifier inverting input; regulation threshold 679-710 mV over −40°C to 125°C and 4.5-52 V VDD; input bias current 100-250 nA; connect centre-tap of output feedback resistor divider to this pin; absolute maximum −0.3 V to 5.5 V. |+| 5 | GND | power_in | Device ground reference; all internal voltages referenced to this pin; connect local bypass capacitor from VDD to GND. |+| 6 | GDRV | output | P-channel MOSFET gate driver output; gate drive voltage (VDD − VGDRV) = 6-10 V for VDD 12-52 V; pull-up source current 125-300 mA, pull-down sink current 200-300 mA; driver current folds back once gate is pulled to 8 V to limit dissipation at high input voltages; absolute maximum VIN − 10 V to VIN. |+| 7 | ISNS | input | Current-sense comparator input; connect a current-sense resistor between VDD and ISNS; overcurrent declared when voltage drop from VDD to ISNS exceeds 55-140 mV (VILIM, −40°C to 125°C, 4.5-52 V); absolute maximum −0.3 V to 52 V. |+| 8 | VDD | power_in | System input supply voltage; operating range 4.5-52 V; UVLO turn-on threshold 3.8-4.5 V with 110-275 mV hysteresis; quiescent current 1.5 mA typ / 3.0 mA max at fOSC = 300 kHz; connect local bypass capacitor from VDD to GND; absolute maximum −0.3 V to 52 V. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-8 |+| Category | Power Management (PMIC) |+| Pins | 8 |++## CAD (KiCad official)++- Symbol: `TPS40200D`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOIC-8 (KiCad packages3D, STEP)+- 3D model files: `tps40200d-etched.step` / `tps40200d-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps40200d.step` / `tps40200d.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps40200) (52 pp, sha256 `a3e23ec7367038ec`, retrieved 2026-09-27, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps40200d-datasheet.pdf)
page.jsonadded+158
@@ -0,0 +1,158 @@+{+  "slug": "tps40200d",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments DC-DC Converters, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "tps40200d",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "tps40200d.kicad_sym",+    "tps40200d.kicad_mod",+    "tps40200d.glb",+    "tps40200d.step",+    "tps40200d.lbr",+    "docs/hero.png",+    "docs/tps40200d-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "TPS40200D",+    "manufacturer": "Texas Instruments",+    "package": "SOIC-8",+    "pin_count": 8,+    "category": "Power Management (PMIC)",+    "subcategory": "DC-DC Converters",+    "datasheet": "https://www.ti.com/cn/lit/gpn/tps40200",+    "parts": {+      "symbol": "tps40200d.kicad_sym",+      "footprint": "tps40200d.kicad_mod",+      "model_3d": "tps40200d-etched.glb",+      "model_3d_plain": "tps40200d.glb",+      "model_3d_step": "tps40200d-etched.step",+      "model_3d_step_plain": "tps40200d.step",+      "lbr": "tps40200d.lbr"+    },+    "distributor_links": {+      "lcsc": "C1530060",+      "digikey": "296-21153-5-ND",+      "mouser": "595-TPS40200D"+    },+    "distributor_check": {+      "checked_at": "2026-09-27T02:27:24Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "296-21153-5-ND",+        "status": "found",+        "lifecycle": "Active"+      },+      "mouser": {+        "pn": "595-TPS40200D",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "RC",+        "type": "input",+        "description": "Oscillator timing pin; connect resistor from VDD (≤750 μA maximum pull-down current) and capacitor to GND to set switching frequency over the 35-500 kHz range; can be synchronised by pulling below 150 mV for ≥20 ns via open-drain output; absolute maximum −0.3 V to 5.5 V."+      },+      {+        "number": "2",+        "name": "SS",+        "type": "input",+        "description": "Soft-start programming pin; connect capacitor from SS to GND; internal pull-up resistance 65-170 kΩ; switching disabled when pulled below 150 mV (VSSRST reset threshold 100-200 mV); also serves as restart timer during hiccup overcurrent recovery; absolute maximum −0.3 V to 9.0 V."+      },+      {+        "number": "3",+        "name": "COMP",+        "type": "output",+        "description": "Error amplifier output; connect control-loop Type-II compensation network between COMP and FB; source current 100-250 μA (VFB = 0.6 V, VCOMP = 1 V), sink current 1.0-2.5 mA (VFB = 1.2 V, VCOMP = 1 V); open-loop gain ≥60 dB, gain-bandwidth product 1.5-3 MHz; absolute maximum −0.3 V to 9.0 V."+      },+      {+        "number": "4",+        "name": "FB",+        "type": "input",+        "description": "Error amplifier inverting input; regulation threshold 679-710 mV over −40°C to 125°C and 4.5-52 V VDD; input bias current 100-250 nA; connect centre-tap of output feedback resistor divider to this pin; absolute maximum −0.3 V to 5.5 V."+      },+      {+        "number": "5",+        "name": "GND",+        "type": "power_in",+        "description": "Device ground reference; all internal voltages referenced to this pin; connect local bypass capacitor from VDD to GND."+      },+      {+        "number": "6",+        "name": "GDRV",+        "type": "output",+        "description": "P-channel MOSFET gate driver output; gate drive voltage (VDD − VGDRV) = 6-10 V for VDD 12-52 V; pull-up source current 125-300 mA, pull-down sink current 200-300 mA; driver current folds back once gate is pulled to 8 V to limit dissipation at high input voltages; absolute maximum VIN − 10 V to VIN."+      },+      {+        "number": "7",+        "name": "ISNS",+        "type": "input",+        "description": "Current-sense comparator input; connect a current-sense resistor between VDD and ISNS; overcurrent declared when voltage drop from VDD to ISNS exceeds 55-140 mV (VILIM, −40°C to 125°C, 4.5-52 V); absolute maximum −0.3 V to 52 V."+      },+      {+        "number": "8",+        "name": "VDD",+        "type": "power_in",+        "description": "System input supply voltage; operating range 4.5-52 V; UVLO turn-on threshold 3.8-4.5 V with 110-275 mV hysteresis; quiescent current 1.5 mA typ / 3.0 mA max at fOSC = 300 kHz; connect local bypass capacitor from VDD to GND; absolute maximum −0.3 V to 52 V."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Discrepancy in datasheet: Pin Functions table on page 3 lists incorrect pin numbers (RC=1, SS=2, COM"+        ],+        "pages_sent": 52,+        "cost_usd": 0.3475,+        "at": "2026-09-27T02:27:08"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/tps40200",+        "pages": 52,+        "sha256": "a3e23ec7367038ec",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 8,+        "described": 8,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file