component
TPS40200D
Public Made by Adomby adom
Texas Instruments DC-DC Converters, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+11−8@@ -53,25 +53,25 @@ "number": "1", "name": "RC", "type": "input",- "description": "Oscillator timing pin; connect resistor from VDD (\u2264750 \u03bcA maximum pull-down current) and capacitor to GND to set switching frequency over the 35-500 kHz range; can be synchronised by pulling below 150 mV for \u226520 ns via open-drain output; absolute maximum \u22120.3 V to 5.5 V."+ "description": "Oscillator timing pin; connect resistor from VDD (≤750 μA maximum pull-down current) and capacitor to GND to set switching frequency over the 35-500 kHz range; can be synchronised by pulling below 150 mV for ≥20 ns via open-drain output; absolute maximum −0.3 V to 5.5 V." }, { "number": "2", "name": "SS", "type": "input",- "description": "Soft-start programming pin; connect capacitor from SS to GND; internal pull-up resistance 65-170 k\u03a9; switching disabled when pulled below 150 mV (VSSRST reset threshold 100-200 mV); also serves as restart timer during hiccup overcurrent recovery; absolute maximum \u22120.3 V to 9.0 V."+ "description": "Soft-start programming pin; connect capacitor from SS to GND; internal pull-up resistance 65-170 kΩ; switching disabled when pulled below 150 mV (VSSRST reset threshold 100-200 mV); also serves as restart timer during hiccup overcurrent recovery; absolute maximum −0.3 V to 9.0 V." }, { "number": "3", "name": "COMP", "type": "output",- "description": "Error amplifier output; connect control-loop Type-II compensation network between COMP and FB; source current 100-250 \u03bcA (VFB = 0.6 V, VCOMP = 1 V), sink current 1.0-2.5 mA (VFB = 1.2 V, VCOMP = 1 V); open-loop gain \u226560 dB, gain-bandwidth product 1.5-3 MHz; absolute maximum \u22120.3 V to 9.0 V."+ "description": "Error amplifier output; connect control-loop Type-II compensation network between COMP and FB; source current 100-250 μA (VFB = 0.6 V, VCOMP = 1 V), sink current 1.0-2.5 mA (VFB = 1.2 V, VCOMP = 1 V); open-loop gain ≥60 dB, gain-bandwidth product 1.5-3 MHz; absolute maximum −0.3 V to 9.0 V." }, { "number": "4", "name": "FB", "type": "input",- "description": "Error amplifier inverting input; regulation threshold 679-710 mV over \u221240\u00b0C to 125\u00b0C and 4.5-52 V VDD; input bias current 100-250 nA; connect centre-tap of output feedback resistor divider to this pin; absolute maximum \u22120.3 V to 5.5 V."+ "description": "Error amplifier inverting input; regulation threshold 679-710 mV over −40°C to 125°C and 4.5-52 V VDD; input bias current 100-250 nA; connect centre-tap of output feedback resistor divider to this pin; absolute maximum −0.3 V to 5.5 V." }, { "number": "5",@@ -83,19 +83,19 @@ "number": "6", "name": "GDRV", "type": "output",- "description": "P-channel MOSFET gate driver output; gate drive voltage (VDD \u2212 VGDRV) = 6-10 V for VDD 12-52 V; pull-up source current 125-300 mA, pull-down sink current 200-300 mA; driver current folds back once gate is pulled to 8 V to limit dissipation at high input voltages; absolute maximum VIN \u2212 10 V to VIN."+ "description": "P-channel MOSFET gate driver output; gate drive voltage (VDD − VGDRV) = 6-10 V for VDD 12-52 V; pull-up source current 125-300 mA, pull-down sink current 200-300 mA; driver current folds back once gate is pulled to 8 V to limit dissipation at high input voltages; absolute maximum VIN − 10 V to VIN." }, { "number": "7", "name": "ISNS", "type": "input",- "description": "Current-sense comparator input; connect a current-sense resistor between VDD and ISNS; overcurrent declared when voltage drop from VDD to ISNS exceeds 55-140 mV (VILIM, \u221240\u00b0C to 125\u00b0C, 4.5-52 V); absolute maximum \u22120.3 V to 52 V."+ "description": "Current-sense comparator input; connect a current-sense resistor between VDD and ISNS; overcurrent declared when voltage drop from VDD to ISNS exceeds 55-140 mV (VILIM, −40°C to 125°C, 4.5-52 V); absolute maximum −0.3 V to 52 V." }, { "number": "8", "name": "VDD", "type": "power_in",- "description": "System input supply voltage; operating range 4.5-52 V; UVLO turn-on threshold 3.8-4.5 V with 110-275 mV hysteresis; quiescent current 1.5 mA typ / 3.0 mA max at fOSC = 300 kHz; connect local bypass capacitor from VDD to GND; absolute maximum \u22120.3 V to 52 V."+ "description": "System input supply voltage; operating range 4.5-52 V; UVLO turn-on threshold 3.8-4.5 V with 110-275 mV hysteresis; quiescent current 1.5 mA typ / 3.0 mA max at fOSC = 300 kHz; connect local bypass capacitor from VDD to GND; absolute maximum −0.3 V to 52 V." } ], "provenance": {@@ -175,5 +175,8 @@ "docs/tps40200d-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }