← Commit history

tps40200d: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·8859943787 · ·parent 5871ff0
2 files changed +91−11
package.json+49−9
@@ -68,25 +68,25 @@         "number": "1",         "name": "RC",         "type": "input",-        "description": "Oscillator timing pin; connect resistor from VDD (\u2264750 \u03bcA maximum pull-down current) and capacitor to GND to set switching frequency over the 35-500 kHz range; can be synchronised by pulling below 150 mV for \u226520 ns via open-drain output; absolute maximum \u22120.3 V to 5.5 V."+        "description": "Oscillator timing pin; connect resistor from VDD (≤750 μA maximum pull-down current) and capacitor to GND to set switching frequency over the 35-500 kHz range; can be synchronised by pulling below 150 mV for ≥20 ns via open-drain output; absolute maximum −0.3 V to 5.5 V."       },       {         "number": "2",         "name": "SS",         "type": "input",-        "description": "Soft-start programming pin; connect capacitor from SS to GND; internal pull-up resistance 65-170 k\u03a9; switching disabled when pulled below 150 mV (VSSRST reset threshold 100-200 mV); also serves as restart timer during hiccup overcurrent recovery; absolute maximum \u22120.3 V to 9.0 V."+        "description": "Soft-start programming pin; connect capacitor from SS to GND; internal pull-up resistance 65-170 kΩ; switching disabled when pulled below 150 mV (VSSRST reset threshold 100-200 mV); also serves as restart timer during hiccup overcurrent recovery; absolute maximum −0.3 V to 9.0 V."       },       {         "number": "3",         "name": "COMP",         "type": "output",-        "description": "Error amplifier output; connect control-loop Type-II compensation network between COMP and FB; source current 100-250 \u03bcA (VFB = 0.6 V, VCOMP = 1 V), sink current 1.0-2.5 mA (VFB = 1.2 V, VCOMP = 1 V); open-loop gain \u226560 dB, gain-bandwidth product 1.5-3 MHz; absolute maximum \u22120.3 V to 9.0 V."+        "description": "Error amplifier output; connect control-loop Type-II compensation network between COMP and FB; source current 100-250 μA (VFB = 0.6 V, VCOMP = 1 V), sink current 1.0-2.5 mA (VFB = 1.2 V, VCOMP = 1 V); open-loop gain ≥60 dB, gain-bandwidth product 1.5-3 MHz; absolute maximum −0.3 V to 9.0 V."       },       {         "number": "4",         "name": "FB",         "type": "input",-        "description": "Error amplifier inverting input; regulation threshold 679-710 mV over \u221240\u00b0C to 125\u00b0C and 4.5-52 V VDD; input bias current 100-250 nA; connect centre-tap of output feedback resistor divider to this pin; absolute maximum \u22120.3 V to 5.5 V."+        "description": "Error amplifier inverting input; regulation threshold 679-710 mV over −40°C to 125°C and 4.5-52 V VDD; input bias current 100-250 nA; connect centre-tap of output feedback resistor divider to this pin; absolute maximum −0.3 V to 5.5 V."       },       {         "number": "5",@@ -98,19 +98,19 @@         "number": "6",         "name": "GDRV",         "type": "output",-        "description": "P-channel MOSFET gate driver output; gate drive voltage (VDD \u2212 VGDRV) = 6-10 V for VDD 12-52 V; pull-up source current 125-300 mA, pull-down sink current 200-300 mA; driver current folds back once gate is pulled to 8 V to limit dissipation at high input voltages; absolute maximum VIN \u2212 10 V to VIN."+        "description": "P-channel MOSFET gate driver output; gate drive voltage (VDD − VGDRV) = 6-10 V for VDD 12-52 V; pull-up source current 125-300 mA, pull-down sink current 200-300 mA; driver current folds back once gate is pulled to 8 V to limit dissipation at high input voltages; absolute maximum VIN − 10 V to VIN."       },       {         "number": "7",         "name": "ISNS",         "type": "input",-        "description": "Current-sense comparator input; connect a current-sense resistor between VDD and ISNS; overcurrent declared when voltage drop from VDD to ISNS exceeds 55-140 mV (VILIM, \u221240\u00b0C to 125\u00b0C, 4.5-52 V); absolute maximum \u22120.3 V to 52 V."+        "description": "Current-sense comparator input; connect a current-sense resistor between VDD and ISNS; overcurrent declared when voltage drop from VDD to ISNS exceeds 55-140 mV (VILIM, −40°C to 125°C, 4.5-52 V); absolute maximum −0.3 V to 52 V."       },       {         "number": "8",         "name": "VDD",         "type": "power_in",-        "description": "System input supply voltage; operating range 4.5-52 V; UVLO turn-on threshold 3.8-4.5 V with 110-275 mV hysteresis; quiescent current 1.5 mA typ / 3.0 mA max at fOSC = 300 kHz; connect local bypass capacitor from VDD to GND; absolute maximum \u22120.3 V to 52 V."+        "description": "System input supply voltage; operating range 4.5-52 V; UVLO turn-on threshold 3.8-4.5 V with 110-275 mV hysteresis; quiescent current 1.5 mA typ / 3.0 mA max at fOSC = 300 kHz; connect local bypass capacitor from VDD to GND; absolute maximum −0.3 V to 52 V."       }     ],     "provenance": {@@ -147,6 +147,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "tps40200d.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          4.9,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "tps40200d-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          4.9,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "4f8f6f99b51741aeacaeadb8e44d6865e568abf09a14e1c46f898d606dfa0558",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -132,7 +132,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "tps40200d.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          4.9,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "tps40200d-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          4.9,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "4f8f6f99b51741aeacaeadb8e44d6865e568abf09a14e1c46f898d606dfa0558",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -179,4 +219,4 @@   "visibility": {     "public": true   }-}\ No newline at end of file+}