← Commit history
page.json+10−7@@ -44,7 +44,7 @@ "number": "2", "name": "SYNC", "type": "bidirectional",- "description": "Synchronization pin used for frequency synchronization; output in primary mode, input in secondary 0\u00b0 or 180\u00b0 mode."+ "description": "Synchronization pin used for frequency synchronization; output in primary mode, input in secondary 0° or 180° mode." }, { "number": "3",@@ -92,13 +92,13 @@ "number": "10", "name": "VDD", "type": "power_out",- "description": "3.3 V regulated output; 0.1 \u00b5F to 1 \u00b5F ceramic bypass capacitor must be connected to AGND close to this pin."+ "description": "3.3 V regulated output; 0.1 µF to 1 µF ceramic bypass capacitor must be connected to AGND close to this pin." }, { "number": "11", "name": "PGOOD", "type": "output",- "description": "Open-drain power-good indicator output; 10 k\u03a9 pullup resistor to VDD recommended; pulls low when out of regulation or faults detected."+ "description": "Open-drain power-good indicator output; 10 kΩ pullup resistor to VDD recommended; pulls low when out of regulation or faults detected." }, { "number": "12",@@ -122,7 +122,7 @@ "number": "15", "name": "VBP", "type": "power_out",- "description": "8 V regulated output for gate driver; 1 \u00b5F to 10 \u00b5F ceramic bypass capacitor must be connected from this pin to PGND."+ "description": "8 V regulated output for gate driver; 1 µF to 10 µF ceramic bypass capacitor must be connected from this pin to PGND." }, { "number": "16",@@ -140,13 +140,13 @@ "number": "18", "name": "BOOT", "type": "output",- "description": "Boot-capacitor node for high-side FET gate driver; bootstrap capacitor (0.1 \u00b5F to 0.22 \u00b5F) connected from this pin to SW."+ "description": "Boot-capacitor node for high-side FET gate driver; bootstrap capacitor (0.1 µF to 0.22 µF) connected from this pin to SW." }, { "number": "19", "name": "VIN", "type": "power_in",- "description": "Input voltage for the controller and DC-DC converter (4.5 V to 60 V); 1 \u00b5F bypass capacitor from this pin to AGND required and placed close to pin."+ "description": "Input voltage for the controller and DC-DC converter (4.5 V to 60 V); 1 µF bypass capacitor from this pin to AGND required and placed close to pin." }, { "number": "20",@@ -239,5 +239,8 @@ "docs/tps40170qrgyrq1-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }