component
TPS40061PWPR
Public Made by Adomby adom
Texas Instruments DC-DC Converters, HTSSOP-16-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+53@@ -0,0 +1,53 @@+# TPS40061PWPR++**Texas Instruments** · DC-DC Converters · HTSSOP-16-EP++TPS40061PWPR from Texas Instruments, in a HTSSOP-16-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | KFF | input | Voltage feed-forward programming pin with resistor to VIN controlling PWM ramp slope via internally divided current. |+| 2 | RT | input | Oscillator frequency programming pin with resistor to ground setting switching frequency and ramp charging current. |+| 3 | BP5 | power_out | 5-V internal reference output bypassed with 0.1-µF capacitor to ground, can supply up to 1 mA external load. |+| 4 | SYNC | input | External synchronization input (VIH = 2 V, VIL = 0.8 V) for oscillator frequency synchronization to external master clock. |+| 5 | SGND | power_in | Signal ground reference for the device. |+| 6 | SS/SD | input | Soft-start and shutdown programming pin with capacitor to ground charged by 2.3 µA current source, disabled at VSS/SD < 125 mV, enabled at VSS/SD > 210 mV, output ramp at 0.85-1.55 V. |+| 7 | VFB | input | Inverting input to error amplifier regulated to 0.700 V internal reference with tolerance of ±0.015 V over temperature. |+| 8 | COMP | output | Output of error amplifier serving as input to PWM comparator, internally clamped above ramp peak for improved large-signal transient response. |+| 9 | PGND | power_in | Power ground reference for the device with low-impedance connection to source of external power MOSFET. |+| 10 | LDRV | output | N-channel synchronous rectifier gate drive output that switches from BP10 voltage when MOSFET on to ground when MOSFET off. |+| 11 | BP10 | power_out | 10-V internal reference output for N-channel gate drive, bypassed with 1-µF ceramic capacitor to ground, can supply up to 1 mA external load. |+| 12 | SW | input | Switched-node connection used for overcurrent sensing in TPS40061 and zero-current sensing in TPS40060. |+| 13 | BPN10 | power_out | Negative 8-V reference output relative to VIN for high-side P-channel MOSFET gate drive, bypassed to VIN with 0.1-µF capacitor. |+| 14 | HDRV | output | Floating high-side P-channel MOSFET gate drive output that switches from VIN when MOSFET off to BPN10 when MOSFET on. |+| 15 | VIN | power_in | Main supply voltage input with operating range of 10 V to 55 V. |+| 16 | ILIM | input | Current limit programming pin with internal current sink setting voltage drop across external resistor to VIN, compared against high-side MOSFET voltage drop for overcurrent detection. |+| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | HTSSOP-16-EP |+| Category | Power Management (PMIC) |+| Pins | 17 |++## CAD (KiCad official)++- Symbol: `TPS40061PWPR`+- Footprint: `Package_SO:TSSOP-16-1EP_4.4x5mm_P0.65mm`+- 3D model: HTSSOP-16-EP (KiCad packages3D, STEP)+- 3D model files: `tps40061pwpr-etched.step` / `tps40061pwpr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps40061pwpr.step` / `tps40061pwpr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps40061) (38 pp, sha256 `321fdc6759613e40`, retrieved 2026-10-01, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps40061pwpr-datasheet.pdf)
page.jsonadded+213@@ -0,0 +1,213 @@+{+ "slug": "tps40061pwpr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments DC-DC Converters, HTSSOP-16-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "tps40061pwpr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tps40061pwpr.kicad_sym",+ "tps40061pwpr.kicad_mod",+ "tps40061pwpr.glb",+ "tps40061pwpr.step",+ "tps40061pwpr.lbr",+ "docs/hero.png",+ "docs/tps40061pwpr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "TPS40061PWPR",+ "manufacturer": "Texas Instruments",+ "package": "HTSSOP-16-EP",+ "pin_count": 17,+ "category": "Power Management (PMIC)",+ "subcategory": "DC-DC Converters",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tps40061",+ "parts": {+ "symbol": "tps40061pwpr.kicad_sym",+ "footprint": "tps40061pwpr.kicad_mod",+ "model_3d": "tps40061pwpr-etched.glb",+ "model_3d_plain": "tps40061pwpr.glb",+ "model_3d_step": "tps40061pwpr-etched.step",+ "model_3d_step_plain": "tps40061pwpr.step",+ "lbr": "tps40061pwpr.lbr"+ },+ "distributor_links": {+ "lcsc": "C2658013",+ "digikey": "296-26962-2-ND",+ "mouser": "595-TPS40061PWPR"+ },+ "distributor_check": {+ "checked_at": "2026-10-01T05:51:30Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-26962-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-TPS40061PWPR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "KFF",+ "type": "input",+ "description": "Voltage feed-forward programming pin with resistor to VIN controlling PWM ramp slope via internally divided current."+ },+ {+ "number": "2",+ "name": "RT",+ "type": "input",+ "description": "Oscillator frequency programming pin with resistor to ground setting switching frequency and ramp charging current."+ },+ {+ "number": "3",+ "name": "BP5",+ "type": "power_out",+ "description": "5-V internal reference output bypassed with 0.1-µF capacitor to ground, can supply up to 1 mA external load."+ },+ {+ "number": "4",+ "name": "SYNC",+ "type": "input",+ "description": "External synchronization input (VIH = 2 V, VIL = 0.8 V) for oscillator frequency synchronization to external master clock."+ },+ {+ "number": "5",+ "name": "SGND",+ "type": "power_in",+ "description": "Signal ground reference for the device."+ },+ {+ "number": "6",+ "name": "SS/SD",+ "type": "input",+ "description": "Soft-start and shutdown programming pin with capacitor to ground charged by 2.3 µA current source, disabled at VSS/SD < 125 mV, enabled at VSS/SD > 210 mV, output ramp at 0.85-1.55 V."+ },+ {+ "number": "7",+ "name": "VFB",+ "type": "input",+ "description": "Inverting input to error amplifier regulated to 0.700 V internal reference with tolerance of ±0.015 V over temperature."+ },+ {+ "number": "8",+ "name": "COMP",+ "type": "output",+ "description": "Output of error amplifier serving as input to PWM comparator, internally clamped above ramp peak for improved large-signal transient response."+ },+ {+ "number": "9",+ "name": "PGND",+ "type": "power_in",+ "description": "Power ground reference for the device with low-impedance connection to source of external power MOSFET."+ },+ {+ "number": "10",+ "name": "LDRV",+ "type": "output",+ "description": "N-channel synchronous rectifier gate drive output that switches from BP10 voltage when MOSFET on to ground when MOSFET off."+ },+ {+ "number": "11",+ "name": "BP10",+ "type": "power_out",+ "description": "10-V internal reference output for N-channel gate drive, bypassed with 1-µF ceramic capacitor to ground, can supply up to 1 mA external load."+ },+ {+ "number": "12",+ "name": "SW",+ "type": "input",+ "description": "Switched-node connection used for overcurrent sensing in TPS40061 and zero-current sensing in TPS40060."+ },+ {+ "number": "13",+ "name": "BPN10",+ "type": "power_out",+ "description": "Negative 8-V reference output relative to VIN for high-side P-channel MOSFET gate drive, bypassed to VIN with 0.1-µF capacitor."+ },+ {+ "number": "14",+ "name": "HDRV",+ "type": "output",+ "description": "Floating high-side P-channel MOSFET gate drive output that switches from VIN when MOSFET off to BPN10 when MOSFET on."+ },+ {+ "number": "15",+ "name": "VIN",+ "type": "power_in",+ "description": "Main supply voltage input with operating range of 10 V to 55 V."+ },+ {+ "number": "16",+ "name": "ILIM",+ "type": "input",+ "description": "Current limit programming pin with internal current sink setting voltage drop across external resistor to VIN, compared against high-side MOSFET voltage drop for overcurrent detection."+ },+ {+ "number": "17",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: COMP (pin 8) is marked as 'I' (input) in the terminal functions table on page 5, but the functional ; LDRV (pin 10) is marked as 'I' (input) in the terminal functions table on page 5, but the functional",+ "exposed pad 17 added from the footprint"+ ],+ "pages_sent": 9,+ "cost_usd": 0.1526,+ "at": "2026-10-01T05:51:13"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tps40061",+ "pages": 38,+ "sha256": "321fdc6759613e40",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 17,+ "described": 17,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}