← Commit history

Initial commit: component/tps40057pwpr

Ray ·197cc3a23d ·
2 files changed +251
README.mdadded+54
@@ -0,0 +1,54 @@+# TPS40057PWPR++**Texas Instruments** · DC-DC Converters · TSSOP-16-EP++TPS40057PWPR from Texas Instruments, in a TSSOP-16-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | KFF | input | Voltage feedforward and UVLO threshold programming input; connect resistor to VIN to set PWM ramp slope and programmable undervoltage lockout level. |+| 2 | RT | input | Switching frequency programming input; connect resistor to ground per formula fSW = 1/(17.82e-6*RT + 17) kHz. |+| 3 | BP5 | power_out | 5V reference output (4.7-5.2V nominal); bypass to ground with 0.1-µF ceramic capacitor, maximum 1 mA external DC load. |+| 4 | SYNC | input | External clock synchronization input; frequency must be 20-30% above programmed fSW, connect to SGND for free-run operation. |+| 5 | SGND | power_in | Signal ground reference for controller logic circuits; establish single-point connection to PGND for proper grounding separation. |+| 6 | SS/SD | input | Soft-start and shutdown control input; capacitor charged at 2.3 µA, output regulation begins at 0.85V and completes at 1.55V, shutdown below 125 mV. |+| 7 | VFB | input | Inverting input to error amplifier; voltage maintained at 0.7V internal reference for closed-loop output voltage regulation. |+| 8 | COMP | output | Error amplifier output applied to PWM comparator; internally clamped above ramp peak to improve large-signal transient response. |+| 9 | PGND | power_in | Power ground reference for driver circuits; requires low-impedance path to MOSFET source for proper circuit operation. |+| 10 | LDRV | output | Synchronous rectifier N-channel gate driver output (0-10V); rise/fall times 24-96 ns with 2.2 nF load, minimum controllable pulse width 100 ns. |+| 11 | BP10 | power_out | 10V reference output (9-10.3V nominal) for synchronous rectifier gate drive; bypass with 1-µF ceramic capacitor, maximum 1 mA external DC load. |+| 12 | SW | input | Switched node sensing input monitoring VIN-SW voltage across high-side MOSFET during conduction; used for pulse-by-pulse current limit comparison. |+| 13 | HDRV | output | Floating high-side N-channel gate driver output switching between BOOST (on) and SW (off); rise/fall times 36-96 ns with 2.2 nF load. |+| 14 | BOOST | power_out | Boosted gate drive supply output (BOOST = SW + 9V nominal ±1.5V); 0.1-µF ceramic bypass capacitor to SW required for charge storage. |+| 15 | VIN | power_in | Main supply voltage input (8-40V operating range); quiescent current 1.5-3 mA with output drivers not switching and VFB ≥ 0.75V. |+| 16 | ILIM | input | Overcurrent threshold programming input; internal current sink (8.5-11.5 µA) through external resistor to VIN sets pulse-by-pulse current limit. |+| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TSSOP-16-EP |+| Category | Power Management (PMIC) |+| Pins | 17 |++## CAD (KiCad official)++- Symbol: `TPS40057PWPR`+- Footprint: `Package_SO:TSSOP-16-1EP_4.4x5mm_P0.65mm`+- 3D model: TSSOP-16-EP (KiCad packages3D, STEP)+- 3D model files: `tps40057pwpr-etched.step` / `tps40057pwpr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps40057pwpr.step` / `tps40057pwpr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps40057) (43 pp, sha256 `8efd3db408deb44b`, retrieved 2026-09-23, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps40057pwpr-datasheet.pdf)
page.jsonadded+197
@@ -0,0 +1,197 @@+{+  "slug": "tps40057pwpr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments DC-DC Converters, TSSOP-16-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "tps40057pwpr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "tps40057pwpr.kicad_sym",+    "tps40057pwpr.kicad_mod",+    "tps40057pwpr.glb",+    "tps40057pwpr.step",+    "tps40057pwpr.lbr",+    "docs/hero.png",+    "docs/tps40057pwpr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "TPS40057PWPR",+    "manufacturer": "Texas Instruments",+    "package": "TSSOP-16-EP",+    "pin_count": 17,+    "category": "Power Management (PMIC)",+    "subcategory": "DC-DC Converters",+    "datasheet": "https://www.ti.com/cn/lit/gpn/tps40057",+    "parts": {+      "symbol": "tps40057pwpr.kicad_sym",+      "footprint": "tps40057pwpr.kicad_mod",+      "model_3d": "tps40057pwpr-etched.glb",+      "model_3d_plain": "tps40057pwpr.glb",+      "model_3d_step": "tps40057pwpr-etched.step",+      "model_3d_step_plain": "tps40057pwpr.step",+      "lbr": "tps40057pwpr.lbr"+    },+    "distributor_links": {+      "lcsc": "C27994"+    },+    "pins": [+      {+        "number": "1",+        "name": "KFF",+        "type": "input",+        "description": "Voltage feedforward and UVLO threshold programming input; connect resistor to VIN to set PWM ramp slope and programmable undervoltage lockout level."+      },+      {+        "number": "2",+        "name": "RT",+        "type": "input",+        "description": "Switching frequency programming input; connect resistor to ground per formula fSW = 1/(17.82e-6*RT + 17) kHz."+      },+      {+        "number": "3",+        "name": "BP5",+        "type": "power_out",+        "description": "5V reference output (4.7-5.2V nominal); bypass to ground with 0.1-µF ceramic capacitor, maximum 1 mA external DC load."+      },+      {+        "number": "4",+        "name": "SYNC",+        "type": "input",+        "description": "External clock synchronization input; frequency must be 20-30% above programmed fSW, connect to SGND for free-run operation."+      },+      {+        "number": "5",+        "name": "SGND",+        "type": "power_in",+        "description": "Signal ground reference for controller logic circuits; establish single-point connection to PGND for proper grounding separation."+      },+      {+        "number": "6",+        "name": "SS/SD",+        "type": "input",+        "description": "Soft-start and shutdown control input; capacitor charged at 2.3 µA, output regulation begins at 0.85V and completes at 1.55V, shutdown below 125 mV."+      },+      {+        "number": "7",+        "name": "VFB",+        "type": "input",+        "description": "Inverting input to error amplifier; voltage maintained at 0.7V internal reference for closed-loop output voltage regulation."+      },+      {+        "number": "8",+        "name": "COMP",+        "type": "output",+        "description": "Error amplifier output applied to PWM comparator; internally clamped above ramp peak to improve large-signal transient response."+      },+      {+        "number": "9",+        "name": "PGND",+        "type": "power_in",+        "description": "Power ground reference for driver circuits; requires low-impedance path to MOSFET source for proper circuit operation."+      },+      {+        "number": "10",+        "name": "LDRV",+        "type": "output",+        "description": "Synchronous rectifier N-channel gate driver output (0-10V); rise/fall times 24-96 ns with 2.2 nF load, minimum controllable pulse width 100 ns."+      },+      {+        "number": "11",+        "name": "BP10",+        "type": "power_out",+        "description": "10V reference output (9-10.3V nominal) for synchronous rectifier gate drive; bypass with 1-µF ceramic capacitor, maximum 1 mA external DC load."+      },+      {+        "number": "12",+        "name": "SW",+        "type": "input",+        "description": "Switched node sensing input monitoring VIN-SW voltage across high-side MOSFET during conduction; used for pulse-by-pulse current limit comparison."+      },+      {+        "number": "13",+        "name": "HDRV",+        "type": "output",+        "description": "Floating high-side N-channel gate driver output switching between BOOST (on) and SW (off); rise/fall times 36-96 ns with 2.2 nF load."+      },+      {+        "number": "14",+        "name": "BOOST",+        "type": "power_out",+        "description": "Boosted gate drive supply output (BOOST = SW + 9V nominal ±1.5V); 0.1-µF ceramic bypass capacitor to SW required for charge storage."+      },+      {+        "number": "15",+        "name": "VIN",+        "type": "power_in",+        "description": "Main supply voltage input (8-40V operating range); quiescent current 1.5-3 mA with output drivers not switching and VFB ≥ 0.75V."+      },+      {+        "number": "16",+        "name": "ILIM",+        "type": "input",+        "description": "Overcurrent threshold programming input; internal current sink (8.5-11.5 µA) through external resistor to VIN sets pulse-by-pulse current limit."+      },+      {+        "number": "17",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "exposed pad 17 added from the footprint"+        ],+        "pages_sent": 43,+        "cost_usd": 0.4616,+        "at": "2026-09-23T00:04:17"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/tps40057",+        "pages": 43,+        "sha256": "8efd3db408deb44b",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 17,+        "described": 17,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file