component
TPS389018QDSERQ1
Public Made by Adomby adom
Texas Instruments Supervisor And Reset ICs, WSON-6(1.5x1.5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTPS389018QDSERQ1
Texas Instruments · Supervisor And Reset ICs · WSON-6(1.5x1.5)
TPS389018QDSERQ1 from Texas Instruments, in a WSON-6(1.5x1.5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SENSE | input | This pin is connected to the voltage to be monitored; RESET goes low when SENSE falls below the negative threshold VITN and goes high when SENSE rises above the positive threshold VITP. |
| 2 | GND | power_in | Ground reference pin for the device. |
| 3 | MR | input | Driving the manual reset pin MR low causes RESET to go low (assert). |
| 4 | VDD | power_in | Supply voltage pin with a recommended range of 1.5 V to 5.5 V and an absolute maximum of 7 V; good analog design practice is to place a 0.1-µF ceramic capacitor close to this pin. |
| 5 | CT | passive | A ground-referenced capacitor connected to this pin sets the RESET deassert delay, tPD(r) (sec) = CCT (µF) × 1.07 + 25 µs (nom), with CCT limited to 0 to 26 µF. |
| 6 | RESET | output | Open-drain output that is driven low when MR is low or SENSE is below VITN, and requires a pullup resistor from 10 kΩ to 1 MΩ; RESET pin current is limited to ±5 mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-6(1.5x1.5) |
| Category | Power Management (PMIC) |
| Pins | 6 |
CAD (KiCad official)
- Symbol:
TPS389018QDSERQ1 - Footprint:
Package_SON:WSON-6_1.5x1.5mm_P0.5mm - 3D model: WSON-6(1.5x1.5) (KiCad packages3D, STEP)
- 3D model files:
tps389018qdserq1-etched.step/tps389018qdserq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps389018qdserq1.step/tps389018qdserq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (27 pp, sha256
df60d175a821bd24, retrieved 2026-10-11, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).